HighPoint rDrive 6628AW User manual

1
rDrive 6628AW
Thunderbolt™ 3 8-Bay Hardware RAID Storage
Quick Installation Guide
V1.0.0

2
Applicable Products
rDrive 6628AW-32T
rDrive 6628AW-48T
rDrive 6628AW-64T
rDrive 6628AW-80T
rDrive 6628AW-96T
Kit Content
rDrive 6628AW RAID Storage Enclosure
Thunderbolt™ 3 40Gb/s Cable
UL Power Cord
Quick Installation Guide

3
Panel Layout-Front View
LED Indicators
Disk Present: Solid blue
Disk Active LED: Flashing blue
Disk Failure LED: Solid red
Disk rebuilding/identifying LED: Flashing red
Power LED: Solid blue
Panel Layout-Rear View

4
System Requirements
Windows system with a ThunderboltTM 3 (USB type-C) port or AIC
card
Windows 8 and later
Enclosure Setup
1. Connect the rDrive 6628AW to the host system with the
Thunderbolt™ 3 cable
2. Connect the rDrive 6628AW to power and turn on the power
switch

5
Software Downloads
1. Download files from http://www.highpoint-
tech.com/USA_new/series-rd6628aw-overview.htm
2. Open the rDrive_Manager folder and select HighPoint rDrive
Manager and follow the onscreen instructions
3. Open the driver folder and extract its contents
4. Go to Device Manager, and under Other Devices, click on RAID
controller
5. Click Update Driver Software
6. Select Browse my computer for driver software
7. Locate the extracted driver folder
8. Then select either the x32 or x64 folder depending on whether
your system is 32 or 64 bits
9. Click OK and then next and follow the onscreen instructions
10. Restart the computer
11. Your RAID array should be mounted as rDrive-01 on the desktop

6
Customer Support
If you encounter any problems with the rDrive 6628AW or have any
questions regarding this or any other HighPoint Technologies, Inc.
product, feel free to contact our Customer Support Department
Web Support:
http://www.highpoint-tech.com/websupport
HighPoint Technologies, Inc. Website:
http://www.highpoint-tech.com
© Copyright 2018 HighPoint Technologies, Inc. All rights reserved.