HIK VISION DS-PDTT15AM-LM-WA User manual

1
23
Wireless Tri-Tech AM Detector
DS-PDTT15AM-LM-WA
Quick Start Guide
2
3
4 5 6 7
1
e f gd
a b c
Diagram References
E N G L I S H
User Manual
Specification
Appearance
I. Detection range
1. PIR Angle Settings 2. PIR Distance Settings
II. Masking seal
4
5
Installation
Detection Range
Anti-Masking Alarm
3
1
2Enrollment
Scan the QR code for more information and operation help.
Note: This product can only power the camera module
(DS-PDCM15PF-IR) as its accessory.
1. Indicator
2. Vertical Pole Mount
4. Top/Bottom Cover
6. PCBA
7. Rear Panel
3. Screw Hole
5. Front Panel
b. PIR Module (Bottom)
d. Power Switch e. Microwave Module
g. PIR Angle
Masked:
PIR Triggered: (top)
Alarm:
MW Triggered:(bottom)
Fault:
+
I. Enrollment succeeded.
Note: The front panel should be installed before powering on
successfully.
II. Check signal strength.
74.2 mm
200.7 mm
a. PIR Module (Top)
c. Tamper Switch
f. Antenna
UD26055B
I
Signal Strength Test
II
xxxx
Device
Hangzhou Hikvision Digital Technology CO., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China
OFF ON
4
13
14
1
2
5
6
13
Detection Method Passive Infrared,Microwave
Detection Range 15 m
Detection Angle 90° @ 180° adjustable
Detection Zones 92
Detectable Speed 0.3～2 m/s
Sensitivity Auto, Low
White Light Filter 10000 lux
Microwave Frequency 24 GHz(24~24.25 GHz)
Pet Immunity 45 Kg
Anti-masking Support
Support
Pattern mask included
Digital Processing Tri-Signal Logic
Sealed Optics Support
Tamper Protection Front,Rear
Environment Temperature
Indicator Support
Signal Strength Indicator Support
Anti-Sway Analytics Support
Power Switch Power Up Enrolling
LED Indicator
Green(Top PIR), Red(Microwave),
Orange(Bottom PIR), Green+Orange(Mask),
Blue(Alarm)
Transmission Technology Tri-X Wireless
Transmission Method Two-Way RF Wireless
Transmission Frequency 915 MHz
Transmission Security AES-128 Encryption
Transmission Range(Free Space) 1 Km
Frequency Hopping Support
Enrolling Method Power up,Remote ID,QR Code
Standard Battery Life 5 years in work status (being triggered 20
times per day)
Power Supply Battery Powered
Battery Model CR123A × 5
Typical Voltage 3 V
Low Voltage Value 2.45±0.1 V
Voltage Range Fully charged(new) to 2.45±0.1V(battery)
Operation Temperature -25 °C to 60 °C (-13 °F to 140 °F)
Storage Temperature -25 °C to 60 °C (-13 °F to 140 °F)
Operation Humidity 10% to 90%
IP Rate IP65
Dimension(WxHxD) 75 mm × 202 mm × 73 mm
Weight 600 g
Mounting Height 0.8 to 1.2 m
Mounting Method Wall
Adaptable Coverage
User Manual
7
8
9
3

1
+
<1 min
<3 min
WEAK INVERSE
STRONG INVERSE
<30 s
DISARMED
ARMED
+
+
4
5
II
Cut #9, #27, #41 Cut #10, #28, #42
1 2 3 4 5 6 7 8 9 101112 1314 151617 18
Masking Seal 3 top
Masking Seal 3 bottom
2021 2223 2425 26 29 3031 3233 3435
38 39 40 43 44 45
Cut #1, #9, #19, #27, #37, #41 Cut #10, #18, #28 #36, #42, #46
Cut #1, #19, #37 Cut #18, #36, #46
1 2 3 4 5 6 7 8 9 10 11 12 1314 151617 18
Masking Seal 1 top
Masking Seal 1 bottom
2021 2223 2425 26 29 3031 3233 3435
38 39 40 43 44 45
1 2 3 4 5 6 7 8 9 10 11 12 1314 151617 18
Masking Seal 2 top
Masking Seal 2 bottom
2021 2223 2425 26 29 3031 3233 3435
38 39 40 43 44 45
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
Cut #10, #11, #12, #14, #16,
#18, #28, #29, #30, #42, #43,
#44, #45, #46
1 2 3 4 5 6 7 8 9 101112 1314 151617 18
Masking Seal 6 top
Masking Seal 6 bottom
2021 2223 2425 26 29 3031 3233 3435
38 39 40 43 44 45
Cut #1, #2, #3, #5, #7, #9,
#19, #20, #21, #37, #38, #39,
#40, #41
1 2 3 4 5 6 7 8 9 101112 1314 151617 18
Masking Seal 4 top
Masking Seal 4 bottom
2021 2223 2425 26 29 3031 3233 3435
38 39 40 43 44 45
Cut #10, #12, #14, #16, #17,
#18, #34, #35, #36, #42, #43,
#44, #45, #46
Masking Seal 6 bottom
2021 2223 2425 26 29 3031 3233 3435
38 39 40 43 44 45
1 2 3 4 5 6 7 8 9 101112 1314 151617 18
Masking Seal 6 top
Cut #1, #3, #5, #7, #8, #9,
#25, #26, #27, #37, #38, #39,
#40, #41
12 3 4 5 6 7 8 9 101112 1314 151617 18
Masking Seal 5 top
Masking Seal 5 bottom
2021 2223 2425 26 29 3031 3233 3435
38 39 40 43 44 45
Cut Reserve
Masking Seal 4
Masking Seal 5
Masking Seal 1
Masking Seal 3 Masking Seal 6
Masking Seal 7
Masking Seal 2
I
1
15m
2
15m15m
15m
15m
15m
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
Not Detected
Not Detected
Detected

©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is
subject to change, without notice, due to rmware updates or other reasons. Please nd the latest version of
this Manual at the Hikvision website (https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
and other Hikvision's trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND
ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE
PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND
HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE
RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED
END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE
DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the RE Directive
2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the product documentation for specic battery
information. The battery is marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info
FCC Information
Please take attention that changes or modication not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator
and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation
BATTERY CAUTION
1. Risk of explosion if the battery is replaced by an incorrect type.
2. Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in
the case of some lithium battery types).
3. Do not dispose of the battery into re or a hot oven, or mechanically crush or cut the battery, which
may result in an explosion.
4. Do not leave the battery in an extremely high temperature surrounding environment, which may
result in an explosion or the leakage of ammable liquid or gas.
5. Do not subject the battery to extremely low air pressure, which may result in an explosion or the
leakage of ammable liquid or gas.
6. Dispose of used batteries according to the instructions.
+ identies the positive terminal(s) of equipment which is used with, or generates direct current. -
identies the negative terminal(s) of equipment which is used with, or generates direct current.
No naked ame sources, such as lighted candles, should be placed on the equipment.
INSTALLATION CAUTION
1. Install the equipment according to the instructions in this manual.
2. To prevent injury, this equipment must be securely attached to the oor/wall in accordance with the
installation instructions.
English