Hilti PUA 80 User manual

PUA 80
377461
Bedienungsanleitung de
Operating instructions en
Mode d’emploi fr
Istruzioni d’uso it
Manual de instrucciones es
Manual de instruções pt
Gebruiksaanwijzing nl
Brugsanvisning da
Bruksanvisning sv
Bruksanvisning no
Käyttöohje fi
Οδηγιες χρησεως el
Használati utasítás hu
Instrukcja obsługi pl
Инструкция по зксплуатации ru
Návod k obsluze cs
Návod na obsluhu sk
Upute za uporabu hr
Navodila za uporabo sl
Ръководство за обслужване bg
Instrucţiuni de utilizare ro
Kulllanma Talimatı tr
ar
Lietošanas pamācība lv
Instrukcija lt
Kasutusjuhend et
ja
ko
zh
cn
Printed: 19.11.2013 | Doc-Nr: PUB / 5151125 / 000 / 01

Green
Red
Green
Red
4
5
3
2
3
4
1
5
2
3
3
1
Printed: 19.11.2013 | Doc-Nr: PUB / 5151125 / 000 / 01

ORIGINAL OPERATING INSTRUCTIONS
PUA 80 charger
It is essential that the operating instructions
are read before the appliance is operated for
the first time.
Always keep these operating instructions to-
gether with the appliance.
Ensure that the operating instructions are
with the appliance when it is given to other
persons.
Contents Page
1 General information 7
2Description 8
3 Technical data 8
4 Safety instructions 9
5Beforeuse 10
6 Operation 10
7 Care and maintenance 11
8Disposal 11
9 Manufacturer’s warranty - tools 12
10 EC declaration of conformity (original) 12
1These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation “appli-
ance” always refers to the PUA 80 charger.
Components, operating controls and indicators 1
@PUA 80 charger
;Charging cord
=Plug
%Supply cord
&LED display
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
seriousbodilyinjuryorfatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning Warning: electricity Warning: caustic
substances
Warning:
explosive
substances
Symbols
Read the
operating
instructions
before use.
The disposal
of batteries
with
household
waste is not
permissible.
Return waste
material for
recycling.
en
7
Printed: 19.11.2013 | Doc-Nr: PUB / 5151125 / 000 / 01

Location of identification data on the appliance
The type designation and serial number can be found on
the type identification plate on the appliance. Make a note
of this data in your operating instructions and always refer
to it when contacting your Hilti representative or service
center.
Type:
Serial no.:
2 Description
2.1 Use of the product as directed
The appliance is designed to charge Hilti batteries of
the types PSA 80, PRA 82 and PRA 801 indoors, in dry
conditions.
The appliance is designed for use with the batteries
specified in these operating instructions. Use of this
appliance to charge batteries of other types is thus not
permissible.
Donotusetheappliancewherethereisariskoffireor
explosion.
Observe the information printed in the operating instruc-
tions concerning operation, care and maintenance.
The appliance is designed for professional use and may
be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed
of any special hazards that may be encountered. The ap-
pliance and its ancillary equipment may present hazards
when used incorrectly by untrained personnel or when
used not as directed.
Tampering with or modification of the appliance is
not permissible.
2.2 Items supplied
1 PUA 80 charger
1 Supply cord
1 Operating instructions
3 Technical data
Right of technical changes reserved.
PUA 80 charger
Mains voltage 100…240 V
Mains frequency 50…60 Hz
Weight 0.36 kg (0.8 lb)
Length of charger supply cord 1.5 m (5 ft)
Dimensions (LXWxH) 120 mm (4.7 in) x 58 mm (2.3 in) x 30 mm (1.2 in)
Control Electronic charging control (microcontroller)
Protection class Electrical protection class II (double insulated)
Operating temperature range +0…+40°C (+32°F to +104°F)
Storage temperature -30…+60°C (-22°F to +140°F)
Technical data for the
charger with the spe-
cified batteries PRA 801 PSA 80 PRA 82
Max. output voltage 5.6 V 14 V 3.8 V
Max. output current 4.4 A 1.7 A 4.4 A
Charging times Approx. 2.5 h Approx. 1.5 h Approx. 2.5 h
Battery PRA 801 PSA 80 PRA 82
Max. output voltage 3.6 V 9.6 V 2.4 V
Capacity 8.5Ah 2Ah 8Ah
en
8
Printed: 19.11.2013 | Doc-Nr: PUB / 5151125 / 000 / 01

Battery PRA 801 PSA 80 PRA 82
Number of cells 3 8 2
4 Safety instructions
In addition to the information relevant to safety given
in each of the sections of these operating instructions,
the following points must be strictly observed at all
times.
4.1 General safety instructions
a) Do not render safety devices ineffective and do
not remove information and warning notices.
b) Use of the appliance is not permissible if the plug
pins are bent or damaged (do not use force when
plugging in).
c) Take the influences of the surrounding area into
account. Do not expose the appliance to rain or
snowanddonotuseitindamporwetconditions.
Do not use the appliance where there is a risk of
fire or explosion.
d) Use the supply cord only for connecting to the
mains supply.
e) Store appliances, when not in use, in a secure place.
When not in use, appliances must be stored in a dry,
high place or locked away out of reach of children.
f) Use the right appliance for the job. Do not use the
appliance for purposes for which it was not inten-
ded. Use it only as directed and when in faultless
condition.
g) When not in use, keep the battery and the charger
away from paper clips, coins, keys, nails, screws
or other small metal objects that could cause a
short circuit at the battery terminals or the char-
ging contacts. A short circuit at the battery terminals
or charging contacts could result in personal injury
(burns) or fire.
h) This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of experi-
ence and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
i) Children must be instructed not to play with the
appliance.
j) Take care to ensure that the batteries suffer no
mechanical damage.
k) Do not charge or continue to use damaged bat-
teries (e.g. batteries with cracks, broken parts,
bent or pushed-in and/or pulled-out contacts).
4.2 Proper organization of the work area
a) Ensure that the workplace is well lit.
b) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
c) Check to ensure that the appliance and supply
cord do not present an obstacle that could lead
to a risk of tripping and personal injury.
d) Puttheapplianceinasecureplacebeforebegin-
ning charging.
4.3 Electrical
a) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
b) Check the appliance’s supply cord at regular in-
tervals and have it replaced by a qualified special-
ist if found to be damaged. Check extension cords
at regular intervals and replace them if damage is
found. Do not touch the supply cord or extension
cord if they are damaged while working. Discon-
nect the supply cord plug from the power outlet.
Damaged supply cords present a risk of electric
shock.
c) Check to ensure that the appliance and all cords
are in good condition. Do not operate the appli-
ance or its accessories if damage is found, if the
appliance is incomplete or if its controls cannot
be operated faultlessly.
d) Have the appliance repaired only at a Hilti service
center.
e) Do not use the supply cord for purposes for which
it is not intended. Never carry the appliance by the
supply cord. Never pull the plug out of the power
outlet by pulling the supply cord.
f) Do not expose the supply cord to heat, oil or sharp
edges.
g) Never operate the appliance when it is dirty or wet.
Under unfavorable conditions, dampness or dust
adhering to the surface of the appliance, especially
dust from conductive materials, may present a risk
of electric shock. Dirty or dusty appliances should
thus be checked at a Hilti service center at regular
intervals, especially if used frequently for working on
conductive materials.
h) Avoid short circuiting the battery terminals. A
short circuit may present a fire hazard.
i) Avoid touching the contacts.
j) Do not use batteries other than those approved for
use with the applicable tool or appliance. Use of other
en
9
Printed: 19.11.2013 | Doc-Nr: PUB / 5151125 / 000 / 01

batteries or use of the battery for purposes for which
it is not intended presents a risk of fire and explosion.
k) Batteries that have reached the end of their life
must be disposed of safely and correctly to avoid
environmental pollution.
4.4 Electromagnetic compatibility
Although the appliance complies with the strict require-
ments of the applicable directives, Hilti cannot entirely
rule out the possibility of interference to the appliance
caused by powerful electromagnetic radiation, leading to
incorrect operation. Check the accuracy of the appliance
by taking measurements by other means when working
under such conditions or if you are unsure. Likewise, Hilti
cannot rule out the possibility of interference with other
devices (e.g. aircraft navigation equipment).
4.5 Liquids
Under abusive conditions, liquid may leak from the bat-
tery. Avoid contact. If contact accidentally occurs,
flush with water. In the event of the liquid coming into
contact with the eyes, rinse the eyes with plenty of
water and consult a doctor. Liquid ejected from the
battery may cause irritation or burns.
5Beforeuse
5.1 Connecting 1
1. Connect the supply cord to the appliance.
2. Plug the supply cord into the power outlet.
3. Connect the charging cable to the PSA 80, PRA 82
or PRA 801 battery.
6Operation
CAUTION
Theappliancebecomeswarmwhilechargingthebattery.Theappliancemustthereforenotbebuilt-in,covered
over or used in a location where the air cannot circulate freely. Do not operate the charger inside a closed
container.
CAUTION
Never store or charge the battery in direct sunlight, on a radiator at a window or behind a pane of glass. The
battery will suffer damage at high temperatures.
6.1 LED indicators 1
NOTE
- Charge the battery only within the temperature range 0 to 40°C (+32°F to +104°F).
- Maximum charging efficiency is achieved at an ambient temperature of 0 to 30°C (+32°F to +86°F).
LED indicators Green LED lights constantly The appliance is connected to the elec-
tric supply and is in operation.
Green LED blinks The battery cannot be charged. The
battery is either faulty or its temperat-
ure is outside the limits for successful
charging. Disconnect the battery from
the charger and allow it to cool down
or warm up accordingly. Subsequently
reconnect the battery to the charger. If
the green LED continues to blink, the
battery is faulty. Contact Hilti.
Red LED lights constantly The battery is being charged.
Red LED blinks Battery charging is complete.
en
10
Printed: 19.11.2013 | Doc-Nr: PUB / 5151125 / 000 / 01

7 Care and maintenance
CAUTION
Disconnect the supply cord plug from the power out-
let.
7.1 Care of the appliance
The outer casing of the appliance is made from impact-
resistant plastic.
Clean the exterior of the appliance at regular intervals with
aslightlydampclothoradrybrush.Donotuseaspray,
steam pressure cleaning equipment or running water for
cleaning. This may negatively affect the electrical safety
oftheappliance.Alwayskeeptheappliancefreefromoil
and grease. Do not use cleaning agents which contain
silicone.
7.2 Maintenance
WARNING
Repairs to electrical parts and replacement of the
supply cord may be carried out only by trained elec-
trical specialists.
Check all external parts of the appliance for damage
at regular intervals and check that all controls operate
faultlessly. Do not operate the appliance when parts are
damaged or when the controls do not function correctly.
If necessary, the appliance should be repaired by Hilti
Service.
7.3 Care of the battery
Keep the electrical contacts free from dust, oil and
grease.
If necessary, use a clean cloth to clean the contact
surfaces.
If battery capacity drops below an acceptable level after
many periods of use and recharging, we recommend
having it checked by Hilti.
8 Disposal
DANGER
Improper disposal of the equipment may have serious consequences:
The burning of plastic components generates toxic fumes which may present a health hazard.
Batteries may explode if damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or
environmental pollution.
Careless disposal may permit unauthorized and improper use of the equipment. This may result in serious personal
injury, injury to third parties and pollution of the environment.
Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further
information.
For EC countries only
Disposal of electric appliances together with household waste is not permissible.
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its
implementation in accordance with national law, electric appliances that have reached the end of their
life must be collected separately and returned to an environmentally compatible recycling facility.
Dispose of the batteries in accordance with national regulations.
en
11
Printed: 19.11.2013 | Doc-Nr: PUB / 5151125 / 000 / 01

9 Manufacturer’s warranty - tools
Hilti warrants that the tool supplied is free of defects in
materialandworkmanship.Thiswarrantyisvalidsolong
as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, and the technical system is main-
tained. This means that only original Hilti consumables,
components and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or re-
placement of defective parts only over the entire lifespan
of the tool. Parts requiring repair or replacement as a
result of normal wear and tear are not covered by this
warranty.
Additional claims are excluded, unless mandatory na-
tional regulations prohibit such exclusion. In particu-
lar, Hilti is not obligated for direct, indirect, incidental
or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or inabil-
ity to use the tool for any purpose. Implied warranties
of merchantability or fitness for a particular purpose
are specifically excluded.
For repair or replacement, send the tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti’s entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.
10 EC declaration of conformity (original)
Designation: Charger
Type: PUA 80
Year of design: 2006
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2011/65/EU, 2006/95/EC, 2004/108/EC, EN 60335‑1,
EN 60335‑2‑29.
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Paolo Luccini Edward Przybylowicz
Head of BA Quality and Process Man-
agement
Head of BU Measuring Systems
Business Area Electric Tools & Ac-
cessories
BU Measuring Systems
11/2013 11/2013
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
en
12
Printed: 19.11.2013 | Doc-Nr: PUB / 5151125 / 000 / 01

*377461*
377461
Hilti Corporation
LI-9494 Schaan
Tel.: +423 / 234 21 11
Fax:+423 / 234 29 65
www.hilti.com
Hilti = registered trademark of Hilti Corp., Schaan
W 2882 | 1113 | 10-Pos. 1 | 1
Printed in Germany © 2013
Right of technical and programme changes reserved S. E. & O.377461 / A3
Printed: 19.11.2013 | Doc-Nr: PUB / 5151125 / 000 / 01