Hisense HS212 User manual

Hisense 2.1 ch Soundbar With Wireless Subwoofer
Model: HS212
Read all the safety instructions carefully before use and keep
this instruction manual for future reference.

-1-
RCA(AUX)
LINE IN
Subwoofer Connection
LINE IN

Manufactured under license from Dolby
laboratories.Dolby and the double-D
symbol are trademarks of Dolby Laboratories.

Bracket(2x) Wall plug(2x) and screw(2x) and bracket screw(4x)

REMOTE SENSOR
Side View:
DISPLAY SCREEN
OPTICAL DIGITAL AUDIO INPUT
HDMI ARC
AUX INPUT
AC INPUT
VOLUME+
STANDBYSOURCE
LINE IN
VOLUME-
USB SLOT
HS 212 Remote Control and LED Display and Port
Remote Control Port
LED Display
OPT OPt OPTICAL
BT bt /
LINE IN LInE
USb
LINE IN
RCA R-AUX,IN-L
USB USB
HDMI ARC ArC HDMI
VOL+/VOL- U 0~45
PAIR PLAy/PAUS
001
MOVIE eq2
NEWS eq3
eq1
MUSIC
MUTE U 0 0
STANDBY on/byE
rCA
Functional Mode
Switch to OPTICAL mode
Switch to Bluetooth mode
Switch to LINE IN mode
Switch to RCA(AUX) mode
Switch to USB mode
Audio Return Channel from TV/AV to
Sound bar
Inside
Inside
Inside
Inside
Inside
Inside
Inside
Inside
In Bluetooth mode/USB mode:Skip to
previous/next track
Play/pause/resume playback in Bluetooth mode
Press and Hold to active the pairing function in
Bluetooth mode or disconnect the existing paired
Bluetooth device
Increase/Decrease the volume level
Viewing in MOVIE mode
listening in NEWS mode
listening in MUSIC mode
Mute or resume volume
Switch the unit between ON and
STANDBY mode

9
11
10
12
13
1 STANDBY
2 OPT
3 BT
4 USB
5 VOLUME+
6 PREVIOUS
7 PLAY/PAUSE/PAIR
8 VOLUME-
9 EQ
10 MUTE
11 RCA/LINE IN
12 HDMI ARC
13NEXT
Switch the unit between ON and STANDBY mode.
Switch to OPTICAL IN mode.
Switch to BLUETOOTH mode.
Switch to USB mode.
Increase the volume level.
Skip to previous track.
Play/pause/resume playback.
In bluetooth connection,press and
hold to disconnect the existing paired
bluetooth device.
Decrease the volume level.
Select a preset sound effect mode.
Mute or resume volume.
Switch the unit between RCA and LINE IN mode.
Switch to HDMI ARC mode.
Skip to next track.

Mounting soundbar on a wall
In order to prevent injuries,the sound base device
must be securely fasten to the wall in accordance
with the below installation instructions.
1.Drill the two holes(about 6mm diameter ) in the wall
and keep the distance between drill holes of the
sound base is 500mm.As shown in the picture on the
right(diagram 1).
2. Insert the two plugs supplied into two drilled holes
and then insert two screws supplied into two holes
and tighten.As shown in the picture on the
right(diagram 2).
3.
heads and wall.As shown in the picture on the
right(diagram 3).
Take care to leave 4 mm between the screw
500mm
4mm
Diagram 1
Diagram 2
Diagram 3
4.Insert the wall-mounting bracket supplied
into the pedestal of the sound base.As shown
in the picture on the right(diagram 4).
5.Use the bracket screws supplied to insert
the wall-mounting bracket hole and
tighten.As shown in the picture on the
right(diagram 5).
6.Use the assembled sound base to hang on
the setscrews on the wall .As shown in the
picture on the right(diagram 6).
Diagram 4
Diagram 5
Diagram 6

REAR PANEL
OF THE SUBWOOFER
Audio out(L,R)
RCA(L,R)
DVD
RCA(AUX)
LINE IN
LINE IN
Insert the AC power cord into
a mains socket.
RCA(AUX)
LINE IN
Make sure the AC power cord is connected to a power supply
securely. subwoofer have the wireless bluetooth to receive the
audio signal from the sound bar.when the blue indicator flashing ,
the subwoofer is in searching bluetooth signal status, the blue
indicator keeps lighting means bluetooth was connected,if the
subwoofer can not connect with the soundbase
automatically,please press pair button on the rear panel of
subwoofer to reconnect .
The subwoofer will memories the sound bar and repaired
automatically when you power off the subwoofer then power on.
Subwoofer Connection

LINE IN
LINE IN
RCA/LINE IN
While adjusting the volume, LED display digit: from 01 to 45 or from 45 to 01.

Amplifier(RMS Output power)
Total
Main Unit
Subwoofer
30 W + 30 W (6Ωx2 at 1 KHz,10%THD)
60 W (4Ω at 80 Hz,10%THD)
Wireless Subwoofer
Size
Dimension(WxHxD)
Net weight
6.5 inch woofer *1
210x325x248mm(8.3x12.8x9.7 inch)
4.8Kg(10.58lbs)
Remote Control
Distance/Angle
Battery Type
19.7feet(6m) /30°
CR2025
120W
General
Bar Power Supply
Main Unit Dimension(WxHxD)
Soundbar Net weight
Audio Input sensitivity
Frequency Response
AC 100-240V~50/60Hz
960x55x80mm (37.7x2.1x3.1 inch)
1.9Kg ( 4.18lbs )
500mV
40Hz-20KHz
Model name HS212
USB 5V/0.5A

Hisense 2.1 ch Soundbar With Wireless Subwoofer