Hitachi RPFI-1.0FSNQ Instruction Manual

RPFI-1.0FSNQ
Floor-
Concealed
Type
RPFI-1.5FSNQ
RPFI-2.0FSNQ
RPFI-2.5FSNQ
P00514Q
.

Declaration of Conformity
(Manufacturer’s Declaration)
RPFI-1.0FSNQ,
RPFI-1.5FSNQ,
RPFI-2.0FSNQ,
RPFI-2.5FSNQ
are in conformity with the following standard(s) or other normative document(s), provided that
these are used in accordance with our instructions:
EN 60335-1
EN 60335-2-40
EN 62233
EN 55014-1
EN 61000-3-2
EN 61000-3-3
EN 55014-2
following the provisions of:
2006/42/EC
2014/30/EU
2012/19/EU
2011/65/EU
Directives, as amended.
Manufacturing number and manufacturing year: refer to model Nameplate.
Notes:
This declaration becomes invalid, if technical or operational modifications are
introduced without the manufacturer's consent.
Johnson Controls Inc. is authorised to Compile the Technical Construction File.
Add. : Westendhof 3,45143 Essen, Germany .
Name, Surname :
Position/ Title : Director
Date : April 15, 2016
Qingdao Hisense Hitachi Air-conditioning Systems Co., Ltd.
Add.: No.218, Qianwangang Road, Economic and Technological Development Zone, Qingdao, China
declares under its sole responsibility that the air conditioning models to which this declaration relates:


 


 



  
 

 

＿ 









 


 

 & 



HITACHI's
HITACHI's
IMPORTANT NOTICE
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmentally safe recycling.

Section2 Installation & Maintenance Manual
10
es

1.0
1
1.5 2.0 2.5
l
l
l
The appliance is not to be used by children or
person with reduced physical, sensory or mental
capabilities,or lack of experience and knowledge,
Children should be supervised that they do not
play with the appliance.
The appliance should not be installed in the
laundry.
unless they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety.
-
(HP)

2

3
Regarding the instructions of Wired Remote Control
Switch or Wireless Remote Control Switch, read the
operation manual attached to the control switch.
4. Before Operation
5. Operation Method
6. Automatic Control

4
7. Troubleshooting

5
R410A

6
I
I
I
I
possible

250
1.0~1.5
7
Ceiling
Outlet
Wall
2.0~2.5
250
619 1000
50 800
(Maintenance space)
Size
Fig.4.2 Suspension Bolts
(unit:mm)

( 10mm)
8
Duct
Tape
Insulation materials
Outlet
Insulation materials Outlet
1.0~1.5
2.0~2.5
1A
Attached all around
(unit:mm)
Size
Nut AnchorM10
Filling Motar
Washer
Fig.4.3. Installation Method
Concrete
bolt adjustment hole Anchor bolt fixed position
4.3.2 Hanging the Indoor Unit
Prevent the subversion of the machine.
The method for ground installation is shown below.
Fix the unit with bolt in the specified lacation as
shown in Fig.4.3.
4.3.3 Connecting Supple Duct
The supply duct should be insert on the root of
the unit outlet.Thermal insulation should be done
and the junction with the unit should be sealed
with aluminum foiltape.
Insulation materials should be attached all around
the outlet preventing the condensation, when there
is no duct connected.
air-tightness

109
9
Liquid pipe Gas pipe
Water tray
2.5
1.0~1.5
2.0
Flaring Dimension
Perform the flaring work as shown below.
(*)It is impossible to perform the flaring work with
1/2H material. In this case, use an accessory
pipe(with a flare).
(unit:mm)
unit:mm(in.)
Φ
Φ
＊
(unit:mm)
aD
6.35
9.53
12.7
15.88
19.05
R410A R407C
9.1
13.2
16.6
19.7
9.0
13.0
16.2
19.4
23.3
( )
202
72
113
397
168
258
394
58
33
50
Installation

10

11
± 6%

220-240V~ 50Hz
12
1.0~2.5
220V~ 60Hz

Standard, EN 60335-1.Use the wires which are not lighter than
220-240V~ 50Hz
13
and Completely seal the end of conduit tube
with sealing materials.
Run through the cables using conduit tube,
Use an ELB (Electric Leakage Breaker).If not
used ,it will cause an electric shock or a fire.
and Completely seal the end of conduit tube
with sealing materials.
Run through the cables using conduit tube,
Use an ELB (Electric Leakage Breaker).If not
used ,it will cause an electric shock or a fire.
Power
Source Rated
Curebt
1.0 2.5
3
The wire sizes marked with *1 in the above table are selected
at the rated current of the unit according to the European
the ordinary polyvinyl chloride sheathed flexible cord
(code designation H05VV-F).
1.0A
Model
2.5
~
220V~ 60Hz
EN 60335-1
1
EN 60335-1
1
$FFRUGLQJWREN 60335-1
※1,QWKHFDVHWKDWFXUUHQWH[FHHGV$
GRQRWFRQQHFWFDEOHVLQVHULHV
&XUUHQW$ :LUH6L]HPP
i≤62.5
6<i≤10 2.5
10<i≤16 2.5
16<i≤25
25<i≤32
32<i≤40
40<i≤63
63<i ※1
4
10
16
6
Line

14
Capacity
Setting
Position Set by inserting
Slotted screwdriver
into the groove
Ex.) Set at No.16 Unit
DSW6
Set No.1 Pin ON
RSW1
Set at "6"
Before shipment. DSW6 and RSW1 are set to "0".
Max.64 units are available to set when all the equipment
Max.16 units when the units corresponding/
Setting
Position Set by inserting
Slotted screwdriver
into the groove
Ex.) Set at No.5 Cycle
DSW5
Set All Pins OFF
RSW2
Set at "5"
Before shipment. DSW5 and RSW2 are set to "0".
Max.64 cycles are available to set when all the equipment
Max.16 cycles when the units corresponding/
a
to be connected are corresponding to H-LINK.
non-corresponding to H-LINK are combined.
to be connected are corresponding to H-LINK.
non-corresponding to H-LINK are combined.
2.5
2.0
1.5
1.0