Hobby King Decathlon-46 User manual

AIRCRAFT SPECIFICATIONS：
Wing Span: 1592mm/62.67"
Wing Area: 37.84 Sq dm/ 586
Lenght:1040mm/40.95in
.5 Sq in
Weight:1300g RTF less battery
ECOMMENDED EQUIPMENT： R
Motor: 3520
Radio: 4 channels, 4 servos
mAh Battery: 4S/5S 3800mAh-4200
ESC: 60A-80A
arning! This model is not a toy.
mance. Please seek
ad c
ut prior preparation may cause
in
safety is the most important thing. Always keep
th
W
It is designed for maximum perfor
vice if one is not familiar with this kind of electri
powered precision model.
Operating this model witho
juries.
Remember,
is instruction manual at hand for quick reference.

1.Main Wing
Wings Part List Apply instant glue
Cut
the
covering
for
installing
the
aileron’s servos
Apply epoxy glue
Install the aileron servos Fix the aileron servo’s cover plate

Fix the aileron’s horn Complete aileron servo system install
2.Main Landing Wheel
Main Landing Wheel Part List Cut the covering away
Apply epoxy glue Cut away this part

The shaft passes through the wheel and
the main landing chassis. Then fixed
using M4 skidproof nut
Put the complete wheel parts into the
wheel cowling
Locking the skidproof nut Locking the Wheelchocks
Fix the main landing gear

3.Stabilizer/Vertical/Tail Wheel
Stabilizer Part List Vertical/Tail Wheel Part List
Cut the covering away for installing
the elevator and elevator’s servos
Draw a line for cutting the covering
away
Draw a line for cutting the covering
away
Judging
by
the
line
to
cutting
the
covering away

Drill diameter 2mm hole for inserting the
linkage rod
Apply epoxy glue
Before
install
the
stabilizer
must
be
passing through the elevator first
Apply epoxy glue
Apply instant glue
Apply epoxy glue
Apply instant glue
Locking the tail wheel Wheelchocks

Cut the tail wheel’s steel wire then
bend the steel wire
Locking the tail wheel
Cut this part away and drill a diameter
2mm hole for inserting tail wheel’s steel wire
Apply instant glue
Apply epoxy glue to fix the tail wheel’s
steel wire
Apply instant glue

Fix the elevator’s servo Fix the elevator’s horn
Complete elevator’s servo installing Fix the rudder’s servo
Fix the rudder’s horn Complete rudder’s servo installing

4.Canopy/ Main Wing
Fix the main wing Canopy Part List
Fix the canopy Wing strut Part List
Fix the wing strut

2.Cowing/ Motor Mounting
Motor mounting Part List Apply instant glue
Apply epoxy glue or White latex Cowling Part List
Draw a mark for drilling the cowling’s
hole
Judging by the mark to drilling the
hole