Hobby King Maestro-46 User manual

SPECIFICATIONS：
Wing Span 56.7in/1440mm
Wing Area 37.44dm²
Flying Weight 2300g
Fuselage Length 40.5in/1030mm
Engine 46(2c) Electromotor(2832)
Radio 4 channels3~4servos
Warning! This model is not a toy.
It is designed for maximum performance. Please seek
advice if one us not familiar
With this kind of engine powered precision model. Operating
this model without
Prior preparation may cause injuries .Remember, safety is
the most important thing. Always keep this instruction manual
at hand for quick reference.

All the objects in the box
Wing installed
Use quick glue adhesive hinge

Wing from A&B resin glue connection is used, and make sure the
glue is firm
Connected to the pull rod of servo

cut the excess cover and use quick glue adhesive hinge
Cut at the end of the fuselage to install the window of the tailplane
and vertical tail

from A&B resin adhesive by the tailplane and vertical tail and
ensure the glue is firm
Landing gear components

The installation of the front landing gear
Cutting landing gear installed below the wing of the cover

Use 3 x12 screws fixed landing gear preforming
Elevator and rudder pull rod parts

Elevator lever position
rudder lever position

The installation of the server
Engine frame, fuel tank, motor mounting bracket component

The installation of motor and propeller
Turn on 5 mm the wing of the mounting hole

The M5 nylon screws fixed wing under the fuselage
Four 2 x12 screws cabin on the fuselage