Hocom SSPX User manual

1
SSPX-Price Computing Scale
User Manual
Cautions
Upon receiving the scale, please take at least 8
hours to recharge the battery (refer to page 9)
before you start to operate this scale.
Please recharge the battery after a long period of
storage (more than one month). It takes 8~10
hours to fully recharge the battery.
Please assemble the platter before powering on
the scale.
Do not keep the weight placed on the platter for a
long period.
Keep the scale away from the environment with
high temperature、high humidity、heavy press、
heavy bump.
Always make sure the scale is located in a flat and
plane surface.

2
SSPX-Price Computing Scale
User Manual
Dimensions
SSPX Tabletop Scale:

3
SSPX-Price Computing Scale
User Manual
Symbols on LCD
Zero Indication ():
cursor appears on the bottom edge of WEIGHT
LCD (above of ZERO printed on the display-overlay),
and indicates the scale is at zero-point.
NET Weight Indication ():
cursor appears on the bottom edge of WEIGHT
LCD (above of NET printed on the display-overlay),
and indicates the tare weight has been deducted.
Indication of kg、100g Weighing Unit () :
cursor will flash on the bottom edge of UNIT
PRICE LCD (above of Kg or 100g printed on the
display-overlay), and indicates the present weighing
unit.
Battery Symbol ( ) :
appears on the bottom edge of WEIGHT LCD,
and indicates the battery is running in low-voltage
status. This is for reminding the user to recharge the
battery.
-
-

4
SSPX-Price Computing Scale
User Manual
Operation Instructions
Status of the Battery :
When WEIGHT LCD indicates and the scale
sounds beep for four times, it means the battery is
running in low-voltage status. WEIGHT LCD will
indicate continuously for reminding the user to
recharge the battery. If the battery is still running in
low-voltage status without being recharged, WEIGHT
LCD will indicate -OFF-and the scale will sound beep
for eight times. Please power off the scale and
recharge the battery (refer to page 9) immediately.
 0 ~ 9 :
(1) Pressing these keys to key in the unit price.
(2) Press and hold [0] key till WEIGHT LCD display
shows the voltage of battery. 6.1 ~ 6.5 means the
battery is running in hi-voltage status. Less than
5.5 means the battery is running in low-voltage
status. Please recharge the battery as soon as
possible. Pressing [C] key could go back to
normal operating-mode.
:
Press and hold [] key till the scale sounds beep to
enable or disable optional Backlight.
-
-

5
SSPX-Price Computing Scale
User Manual
 C :
Pressing this key to delete the setting of unit price. Users
could key in the unit price directly without pressing [C] key
while the last transaction had been finished for more than
5 seconds.
 ZERO :
Pressing this key to make the scale be at zero-point.
WEIGHT LCD will indicate cursor on the above of
ZERO (printed on the display-overlay).
 TARE :
Pressing this key could get the net weight. Place a
package or container on the platter and press this key
to deduct the tare weight, WEIGHT LCD will show
0.000 and indicate cursors on the above of ZERO
and NET (printed on the display-overlay).

CHANGE :
Press this key to operate money-change function.
Example:
When TOTAL LCD shows $17.15, and the customer
gives $20.00. Press [CHANGE] key once, and then
key in 20. LCDs will show:

6
SSPX-Price Computing Scale
User Manual
WEIGHT
20.00 (amount from the customer)
UNIT PRICE
17.15 (total amount of transaction)
TOTAL PRICE
C 2.85 (return to the customer)

PLU :
There are 100 sets of indirect PLU (PLU00 ~ PLU99)
on this model.
Example (1): Save 1.05 into PLU11
1. Key in the unit price 1.05;
2. Press [PLU] key once, and then press [1] key
once;
3. Press and hold [1] key till the scale sounds beep
→Finish setting, users can press [PLU] →[1]
→[1] to recall 1.05 showed on UNIT PRICE LCD.
Example (2):Save 8.80 into PLU25
1. Key in the unit price 8.80;
2. Press [PLU] key once, and then press [2] key
once.
3. Press and hold [5] key till the scale sounds beep
→Finish setting, users can press [PLU] →[2]
→[5] to recall 8.80showed on UNIT PRICE LCD.
For modifying the setting figures, please key in a new
unit price and follow directly step 2 and step 3 as
above.

7
SSPX-Price Computing Scale
User Manual
 M1 ~ M3 :
3 direct PLU for saving the unit prices
Example:
Save 7.50 into M3 memory bank
Key in [7] [5] [0] >> Press and hold [M3] key till the
scale soundsbeep >> Finish setting.
At this moment, pressing [M3] key could recall $7.50
showed on UNIT PRICE LCD. To modify the setting
figure of M3, please just follow the above steps again.
 UNIT :
Press this key once, WEGIHT LCD will indicate ch9 -, and
then press [1] or [2] key to select the weighing mode:
Press [1] key to select kg mode.
Press [2] key to select 100g mode.

8
SSPX-Price Computing Scale
User Manual
RS232 Interface Connection:<optional device>
SCALE PC
RS232 Wiring Configuration:
Baurate: 9600
Parity: None
Stop Bit: 1
Data Bit: 8
GND
5
4
3
2
1
9
8
7
6
5
4
3
2
1
9
8
7
6
DATA OUT

9
SSPX-Price Computing Scale
User Manual
Recharge the Battery
Power off the scale and connect the power cord to an
AC outlet. CHARGE LED will indicate the ongoing
status of the battery. It takes about 8~10 hours to
fully recharge the battery.
CHARGE LED:
Color of LED
Status of the battery
RED
Initial Connection
ORANGE
Charging
GREEN
Fully-charged
Power Supply
AC: 220V ±10% 50/60 Hz
DC: 6V DC / 25mA Rechargeable battery;
P=0.2W(max)

10
SSPX-Price Computing Scale
User Manual
NOTE ：