Hodedah HI4011-Z User manual

ITEM#HI4011-Z
OFFICE CHAIR
1 person
30 mins
1 Box
1 YR LTD
H39.2"W22"D18.1"

2
Silver Bolt
Silver Bolt
2
1
Allen Key
Black Bolt
8
Ø8*30mm Ø6*30mm
122
11
11
5
Chair back
Base Caster
Gas bar
Plastic cover
Plastic arm decor
Chair arms
1
Metal base
Chair seat
Ø6*20mm
#
5

D
B
C
2
5
4
9
7
8
6
3
A
1
3
A
C
D

●
Attach caster (9) on base (7) .(see photos for example)
Insert plastic cover (8) on base (7).
●
9
7
7
8

●
Attach gas bar (6) on base(7) .(see photos for example)
Attach chair back(1) on chair seat(4), screw 2 X bolt (B) with allen key (E) after two holes
aligned with screw holes on metal rod.(see photos for example)
●
6
7
HARDWARE REQUIRED
E
2*B
4
1
E
B

●
Attach metal rod (3) on chair seat (4)and back(1),screw 2 X bolt(A) with allen key (D)in the holes
after two holes on rod aligned with screw holes on chair back,seat.(see photos for example)
1
3
A
C
HARDWARE REQUIRED
D
4*C
2*A
D
Step 6
Attach metal base (4) on bottom of chair seat (3),fix screw 4 X bolt(C) with allen key (E) in the
holes after four holes aligned ,then tighten screw.(see photos for example)
●
HARDWARE REQUIRED
D
4*C
E
C
4
●
Screw 4X bolt(B) with allen key (D)in the holes after two holes on rod aligned with screw holes on
chair seat.(see photos for example)
A
E

Put chair seat (4) on top of gas bar(6) , let gas top into metal base(5) hole, sit on chair to let
gas bar attach together .(see photos for example)
●
4
5
6
●
Tighten all screws after every part is in the right position;
Cover plastic arm decor on arms.(see photos for example)
●
Step 7
Step 8