Hodedah HIK 77 User manual

HIK 77
L23 58'' X D16 68'' X H4218''
1
Hodedah
www.hodedah.com
support @hodedah.com

PART & HARDWARE LIST
2
P/H SCREW M4 X 36MM 2
MCAP
902 MAGNET PLATE
902 MAGNET
CB M3 X 12MM
CASTER WITH STOPPER
CASTER WIHTOUT STOPPER
CASTER BOLT
CASTER NUT
DRAWER SLIDE 14''
U1
U2
Hodedah
www.hodedah.com
support @hodedah.com
APLASTIC DOWEL M8 X 25MM 18
B CB SCREW M3.5 X 12MM 12
CCB SCREW M4 X 25MM 2
D8
ECSK CAP M6 X 40MM 14
FPOWER NAIL 6/8 44
CB SCREW M4 X 35MM
GPVC SHELF SUPPORT 4
H DOOR SUPPORT SPRING 4
IALLEN KEY 1
JHANDLE IP994 (96MM) - PVC 3
KP/H SCREW M4 X 20MM 4
L
N
O
P
Q
R
U
S
T
14
2
2
2
2
2
4
1
4
6
1
7
2
15
4
5
3
11
11 12
10
13
14
8
9

3
- This product contains small components, please ensure that they are
kept away from small children.
- THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE
REFERENCE.
STOP
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, email our customer
service. We will gladly ship your replacement parts
FREE of charge.
email us at
[email protected]
For prompt, reliable service; please have your
assembly manual ready.
Need Parts or Assistance?
Hodedah
www.hodedah.com
support @hodedah.com

4
Thank you for purchasing from Hodedah
To learn more about hodedah and our products visit
www.hodedah.com
READ BEFORE BEGINNING ASSEMBLY
- Read each step carefully. It is very important that each step of instruction is performed in the
correct order. If these steps are not followed in sequence, assembly difficulties will occur.
- Make sure all parts are included. Most parts are labeled or stamped on the raw edge.
- Work in spacious area, preferably on a carpet, near the place the unit will be used.
- Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
HELPFUL HINTS
- Call us if you need assistance.
- Move your new furniture carefully, with two people lift and carry the unit to it's new location.
- Never push, drag or pull your furniture (especially on carpet).
Warranty Information
Hodedah warrants this product to be free from defects in material and workmanship agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is
solely limited to be repair or replacement of defective parts and no assembly labor is included.
This warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way.
To obtain warranty, purchaser must present original bill of sale. Components repaired or
replaced warranted through the remainder of the original warranty period only. The defective
components will be repaired or replaced without charge, subject to the terms and conditions
described above.
For help with assembly, identifying parts, product information or to
order parts, please contact us :
Call us at :
718-456-0505
Monday - Friday
9:00am - 5:00pm
Visit our website :
www.hodedah.com
Hodedah
www.hodedah.com
support @hodedah.com

1
Left view
G4
PVC SHELF SUPPORT
BCB SCREW M3.5 X 12MM 6
U1
UDRAWER SLIDE 14" 1
724
5
3
STEP 1
APLASTIC DOWEL M8 X 25MM 18
5
Hodedah
www.hodedah.com
support @hodedah.com
A
- Insert 18 x Plastic dowel (A) into panels (2), (3), (4), (5) & (7) using a plastic hammer.
- Insert 4 x Pvc shelf support (G) into panels (1) & (6) by push with thumb.
- Attach 2 x Drawer slide 14" (U1) to panels (1) & (6) with 6 x CB Screw M3.5 x 12 (B) using a Phillips
head screwdriver
6
GU1
B
Right view Left view Right view
6
1

Bottom view
STEP 2
6
Hodedah
www.hodedah.com
support @hodedah.com
- Insert 2 x 902 Magnet (O) into panels (3) using a plastic hammer (Knock gently).
- Insert 4 x Door support spring (H) into panels (8) & (9) by push with thumb.
- Attach 2 x Handle (J) to panels (8) & (9) with 4 x P/H Screw M4 x 20 (K) using a Phillips head screwdriver.
- Fix 2 x Magnet plate (N) to Panel (8) & (9) with 2 x CB Screw M3 x 12mm (P) using a Philips head
screwdriver.
K4
JMOON HANDLE IP994 (96MM) 2
H DOOR SUPPORT SPRING 4
P/H SCREW M4 X 20MM P
O902 MAGNET 2
N MAGNET PLATE
C/B SCREW M3 X 12MM
2
2
3
O
9
8
H
98
JK
89
Front view
Front view Back view
PN
O

STEP 3
7
Hodedah
www.hodedah.com
support @hodedah.com
- Attach panel (1) to panels (2), (3), (4), (5) & (7).
- Insert 7 x CSK Cap screw (E) & cap (M) into panel (1) and tighten with a Allen Key (I).
- Attach panel (6) to panels (2), (3), (4), (5) & (7).
- Insert 7 x CSK Cap screw (E) & cap (M) into panel (6) and tighten with a Allen Key (I).
- Fix 2 x U caster with lock (Q) into panels (1) & (6) front.
- Insert 4 x Caster Bolt (S), & Caster Nut (T) into U caster (Q) and tighten spanner.
- Fix 2 x U caster without lock (R) into panels (1) & (6) back.
- Insert 4 x Caster Bolt (S), & Caster Nut (T) into U caster (Q) and tighten spanner.
M14
IALLEN KEY 1
ECSK CAP M6 X 40MM 14
CAP S
R2
QCASTER WITH STOPPER
CASTER BOLT
2
4
CASTER WITHOUT STOPPER
TCASTER NUT 4
1
7
5
4
3
2
MI
E
6
M
I
E
T
S
Q
S
R
T

U2
U2
STEP 4
8
Hodedah
www.hodedah.com
support @hodedah.com
- Insert 2 x CB Screw M4 x 25mm (C) into panel (10) using a Phillips head screwdriver.
- Attach panels (10) & (12) to panel (11).
- Insert 8 x CB Screw M4 x 35mm (D) to panels (11) using a Phillips head screwdriver
- Attach 1 x Handle (J) to panels (11) with 2 x P/H Screw M4 x 36 (L) using a Phillips head screwdriver.
- Slide panel (13) into groove of panel (11).
- Attach 2 x Drawer slide 14" (U2) to panels (11) with 6 x CB Screw M3.5 x 12 (B) using a Phillips
head screwdriver
- Fix 10 x Power nail (F) into panel (13) using a hammer.
D2
CMOON HANDLE IP994 (96MM) 1
B CB SCREW M3.5 X 12MM 6
P/H SCREW M4 X 36MM
J
U
L
DRAWER SLIDE 14' 1
2
8
CB SCREW M4 X 25MM
CB SCREW M4 X 35MM
POWER NAIL 6/8" 10
F
10
C
L
J
U2
13
BF

UP
BOTTOM
Back view
STEP 5
9
Hodedah
www.hodedah.com
support @hodedah.com
- Fix 34 x Power nail (F) into panels (14) using a hammer.
- Slide panel (15) inside the kitchen cabinet.
- Insert the Door support spring (H) at the panel (9) top into the hole at bottom of panel (3).
- Press the Door support spring (H) at the panel (9) bottom & insert into the hole at panel (4).
- Do the same step for the panel (8).
POWER NAIL 6/8" 34
F
14 14
F15
9
8

STEP 6
10
Hodedah
www.hodedah.com
support @hodedah.com
Job Complete !
In the interest of our environment please dispose of all packaging throughtfully.
- Slide Drawer box into the Drawer slide at panel (1), (6) & (11).