Hodedah HI 690-G User manual

Assembly Instructions
This instruction booklet contains important safety information, please read and keep for future reference.
HODEDAH ®
ITEM # HI 690-G (MOP)
2 people
90 mins
1 YR LTD
1 Box
FRONT VIEW BACK VIEW
www.Hodedah.com 1| Page
Product Dimensions: Height 28" x Width 32" x Depth 16"
Weight Capacity Per Shelf 25lbs
ENTRY WAY ACCENT TABLE

HODEDAH ®
www.Hodedah.com 2| Page
DO NOT RETURN PRODUCT TO THE STORE
Phone WebsiteEmail
Questions, need parts, we are here to help!
WARRANTY
WARNING
If parts are missing or damaged please contact our customer service team and we will
gladly ship your replacement parts FREE of charge within ONE YEAR of purchase!
Hodedah warrants this product to be free from defects in materials and workmanship and agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is solely
limited to replacement of defective parts and no assembly for labor is included. This warranty does not
apply to any product that has been improperly assembled, subjected to misuse, abuse or which has been
altered or repaired in any way. To obtain warranty service, original purchaser must present the following;
original bill of sale, date of purchase, where the product was purchased and images if applicable.
Components replaced warranted through the remainder of the original warranty only. The defective part
will be replaced without charge, subject to the terms and conditions described above.
Mon - Fri | 9:30 am to 5pm EST Send us an email
FOR PROMPT, RELIABLE SERVICE PLEASE HAVE YOUR INSTRUCTION MANUAL READY
Visit our website to open a case
1 - 855 - HODEDAH
1 - 855 - 463 -3324
[email protected] www.Hodedah.com
·This product contains small parts, keep away from children.
·This product contains plastic bags, keep away from children.
·Serious or fatal crushing injuries can occur from furniture tip-over. To help
prevent this, place heaviest items on the lower shelves and drawers. Do not set
heavy objects on top shelves and drawers.
·Never allow children to climb or hang on drawers, shelves and doors.
·Never open more than one drawer at a time.
·The use of tip-over restraints may reduce but not eliminate the risk of tip-over.

HODEDAH ®
www.Hodedah.com 3| Page
Product Care and Maintenance
Let's get started…
·Never open more than one drawer at a time.
·The use of tip-over restranits may reduce but not eliminate the risk of tip-over.
·Make sure you receive all boxes. If your item is packed in one box, box count will read 1
of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second
box will read 2 of 2.
·Read each step carefully. It is very important that each step is performed in the correct
order. If these steps are not followed in sequence, assembly difficulties will occur.
·Work in a spacious level area, preferably carpet, near the place the unit will be used.
·DO NO USE power tools to assemble your furniture, it will strip and damage parts.
·Your package should include the following hardware and parts. Parts are labeled or
stamped on the raw edge. Please inspect contents to ensure you have received all
components. If you are missing any hardware or parts please contact customer
service right away before assembly.
Helpful hints, read before beginning assembly
Assembly Tools Required (not supplied)
·Wipe clean with dry soft cloth, never use chemicals or cleaning products they will
damage the finish.
·Avoid placing your furniture in direct sunlight, as sunlight causes fading.
·Never push, drag or pull your furniture, to move to a new location carefully with
two or more people carry the unit to its new location.
·Avoid extreme changes in temperature by arranging furniture away from radiators,
heat and air vents and air conditioning units.
Hammer Phillips Screwdriver No Power Tools NeededTape Measure

HODEDAH ®
www.Hodedah.com 4| Page
Hardware List
QTY 2QTY 3QTY
QTY 5QTY 6QTY
Pvc Dowel
12 Pcs
7QTY 8QTY
Nail
24Pcs
11
QTY
Allen Key
1 Pc
QTY
13
QTY
Hinges
9
QTY
4
Important
1. Before you throw the package, please use the Check Box to identify the parts and hardware
to ensure that you have everything you need.
2. Check and measure the bolts before applying them to parts.
3. Do not completely tighten all hardware until the entire assembly is complete, unless indicated
otherwise.
8 Pcs
Shelf Support
10
QTY 14 QTY 15 QTY
8 Pcs
Screw M 10 X 1/2 MM
6 Pcs
Screw M3.5 x 14mm
16 Pcs
Door Buffer
2 Pcs4 Sets
(separate from
hardware pack)
Anti-Tip Kit
1 PK
Screw M4 x 25mm
*For # 9 Support Leg
1
Screw M6 x 40mm
Pvc Cap 6 Pcs
16 Pcs
Screw M3.1 x 12mm
*For # 12 Door Buffer
4 Pcs
6 Sets
Pvc Cap
Mini Fix
6 Pcs
Support Leg
4 Pcs
Ice Cream Leg
(185mm)
4 Pcs
12

HODEDAH ®
www.Hodedah.com 5| Page
AQTY BQTY
DQTY EQTY FQTY
GQTY HQTY QTY
QTY
Parts List
J
CQTY
I
Bottom Panel
800 x 374 x 15mm
1 Pc 1 Pc
Left Side Panel
457 x 375 x 15mm
Center Panel
457 x 375 x 15mm
1 Pc
Right Side Panel
457 x 375 x 15mm
1 Pc
Top Panel
800 x 394 x 30mm
1 Pc
Back Panels
797 x 300 x 3mm
1 Pc
Back Panels
797 x 199 x 3mm
1 Pc
Door Panel - Left Side
468 x 395 x 15 mm
1 Pc
Door Panel - Right Side
468 x 39 5 x 15 mm
1 Pc
Adjust Panels
376 x 343 x 15mm
2 Pcs

HODEDAH ®
www.Hodedah.com 6| Page
The Breakdown
I) Main Unit :
II) Door & Back panels :
E
B
A
D
J
C
F
G
I
H

Place hinge ⑪at
the panels Bas
shown. Then
tighten the hinge
⑪with 2 screws ④
and 2 screws ⑤.
Insert 2 shelf supports ⑧into
panels B’s non thru holes as
shown.
PANEL B
PANEL D
7
7
7
7
7
7
7
7
8
8
8
8
6
6
6
6
11
11
11
11
45
4
4
5
5
45
11
45
Insert the mini fix
⑥(nuts) with the
cross arrow
mark facing
downward and
aim to panel B's
top
thru holes. (As
shown)
Insert the pvc dowels ⑦,
using hammer to gently
tap them in.
Insert the mini fix ⑥(nuts)
with the cross arrow
mark facing downward
and aim to panel D's top
thru holes. (As shown)
Insert the pvc dowels ⑦,
using hammer to gently
tap them in.
Insert 2 shelf supports ⑧into
panels D’s non thru holes as
shown.
Place hinge ⑪at the
panels Das shown. Then
tighten the hinge ⑪with 2
screws ④and 2 screws ⑤.
HODEDAH ®
www.Hodedah.com 7| Page
Pre - Assembly
HINGES
4 Pcs.
SCREW M 10 X 1/2 MM
8 Pcs.
Screw M3.5 x 14mm
8 Pcs.
Pvc Dowel
8 Pcs.
SHELF SUPPORT
4 Pcs.
4 5 678 11
Mini Fix
4 Pcs.

HODEDAH ®
www.Hodedah.com 8| Page
Pre - Assembly
Pvc Dowel
4 Pcs.
SHELF SUPPORT
4 Pcs.
78
PANEL C
PANEL E
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
8
8
8
8
Insert the mini fix
⑥(nuts) with the
cross arrow
mark facing
downward and
aim to panel B's
top
thru holes. (As
shown)
Insert the pvc dowels ⑦,
using hammer to gently
tap them in.
Insert 4 shelf supports ⑧into
panels C’s thru holes as shown.
Insert, push down and tighten
mini fix screw ⑥, to the
non-thru hole panel Eas shown,
6pcs.
6Mini Fix
2 Pcs. 6Mini Fix 6 Pcs.

HODEDAH ®
www.Hodedah.com 9| Page
Pre - Assembly
Door Buffer
2 Pcs.
Screw M3.1 x 12mm
4 Pcs.
312
PANEL C
3
12
3
12
3
12
3
12
Place door buffer
base ⑫at the panels
Cas shown. Then
tighten the door
buffer base ⑫with 2
screws ③.
After tigthen door buffer base ⑫
at the panels C. Then insert the
door buffer magnet ⑫onto the
base door buffer ⑫. (As shown)

HODEDAH ®
www.Hodedah.com 10| Page
Pre - Assembly
HINGES
4 Pcs.
Screw M3.5 x 14mm
8 Pcs.
411
11
4
Insert 4 hinges ⑪into
door panels Hand I's
non-thru hole as shown,
then tighten hingers ⑪
with screws ④

HODEDAH ®
www.Hodedah.com 11| Page
Step 1
Screw
M 6 x 40mm
6 Pcs.
1Allen Key
1 Pc.
14
* Place and fix Panel B,C and D onto Panel A by inserting the
(Bottom) dowels onto the non-thru holes at Panel A.
* Using allen key ⑭to tighten screws ①from the 6 thru holes
of panel A , one by one.
A
C
B
D
1
1
1
1
1
1
CAUTIONS : When insert the PVC Dowels to non-thru holes, don't push to hard. Otherwise, the side
panels ( A ) may be damaged.

HODEDAH ®
www.Hodedah.com 12| Page
Step 2
Mini Fix Cap
6 Pcs.
6
CAUTIONS : When insert the PVC Dowels to non-thru holes, don't push to hard. Otherwise, the side
panels ( E ) may be damaged.
Dowel / Mini Fix Installation
6
E
Place and fix panel E onto panel B, Cand D, and align properly by inserting the 6 (down)
mini fix screws ⑥onto the L-thru holes at top edge of panel B, Cand D. At the same
time, inserting panel B, Cand D's upside dowel going onto panel E's non-thru holes.
D
*Then, tighten mini fix ⑥ clockwise to lock
the mini fix up for tightening panel E.
Cover 6 mini fix caps provided by pushing
the cover 's stem onto the hole of mini fix
nut on upper side of panel B, Cand D.
B
C
D
E

HODEDAH ®
www.Hodedah.com 13| Page
Step 3
9
2
Place and tighten the support leg ⑨onto panel A using srews ②.
(As shown)
Then, tighten the ice cream leg ⑩by insert the thread of ice
cream leg ⑩to the support leg ⑨and turning clockwise to lock.
A
10
10
10
10
Leg Support
4 Pcs.
9
Screw
M4 x 25mm
16 Pcs.
2Ice Cream Leg
4 Pcs.
10

Lift up the main unit carefully and let it stand up properly.
Join the door panels Hand I's hinges with panel Aand E's hinges as shown.
You can align the door by tightening and loosening the screws as shown.
AdjustAdjust
11
H
I
A
E
HODEDAH ®
www.Hodedah.com 14| Page
Step 4

HODEDAH ®
www.Hodedah.com 15| Page
Step 5
Put adjust panels Jonto shelf support as shown.
JJ

HODEDAH ®
www.Hodedah.com 16| Page
Step 6
* Place the back panel Fand Gonto the back of the main unit.
Then align them properly for nailing.
* Then use hammer to nail the nails one by one and at center of 4
side edges. Gap between 2 nails should be about 100mm for all.
F
G
8Nail
24 Pcs.

HODEDAH ®
www.Hodedah.com
b
TP 6#x5/8'' Screw
2Pcs.
Mounting bracket
4Pcs. d
Restraint strap
2Pcs.
·Attach the mounting bracket a to the furniture in the
solid part below the top panel a few inches away from the
side of the unit.
·Screw b through the smallest hole of a .
FITTING OF ANTI-TIP SAFETY STRAP
STEP 1:
STEP 2:
·Locate a stud in the wall
behind the unit,does not
have to be centered.
·Place the other mounting
bracket a on the wall
stud 2 inches below the
mounting bracket
secured to the back of
your unit.
·Attach to the wall stud
using c through the
smaller hole of a .
·Repeat the same step a few inches away from
the other side of the unit.
·Place the furniture into position so both mounting
brackets are vertically in line.
·Lace the end of the restraint strap through the
larger holes in each mounting bracket.
·Secure the straps and lock into place.
STEP 3:
TP 8#x2'' Screw
2Pcs.
BACK SIDE OF
TOP PANEL
WALL
ac
FURNITURE
17| Page

HODEDAH ®
www.Hodedah.com 18| Page
Completion
In the interest of our environment please dispose of all packaging thoughtfully.
Enjoy & Thank you for purchasing from Hodedah!