HOLLICY SX1888 User manual

Model:SX1888
Executive standard：
EN71-1
EN71-2
EN71-3
EN62115
Please read the assembly manual before using the product.
Keep the manual and packing list for later references.
Assemble as per the instructions stated in the manual.
The assembly manual of
battery operated car
Products should be assembled by an adult. Protective equipment
should be worn. Not to be used in traffic. Not suitable for children
under 3 years. Choking hazard- small parts. In unassembled
state, contains potentially hazardous small parts. Please keep
out of the reach of small children. Pay attention to the potential
hazards of using the toy in areas other than private grounds.

PARTS LIST
PARTS NAME PICTURE QTY PARTS NAME PICTURE QTY
6PCS
1PC
1PC 1PC
1PC
1PC
1PC
1PC
1PC
2PC
Car body
Rear mirror
Remote control
Charger
Instruction
（optional）
MP3
（optional）
（optional）
MP3
1PC
1PC
（optional）
MP4
Saddle
PRODUCT SPECIFICATIONS
12V-7AH 12V-10AH 12V-14AHor or
PP
60KGS (two motors),90 KGS (four motors), 110 KGS (six motors)
139X68.7X61.6cm
Battery
Main material
Suitable age
Weight limit
Product size
Speed
Runtime
Charger
Fuse
37-95 Months
3-5KM/Hour
Auto-reset fuse
input AC 110-220V Out DC 12V-1000mA
F31
V
SD USB FLASHBLE
front / rear
wheel
hardware
package
steering wheel
(optional)
1-2 hours after charging for 8-12 hours, based on ride on conditions

Adjustable steering wheel (optional)
Adjustable saddle
Press and hold button
②, slowly move
steering wheel up or
down. Release the
button to lock steering
wheel position. Steering
wheel has a 3 position
telescopic adjustment
function.
There is a locked rod under the saddle, pull the rod out,
saddle can be adjusted for forward and backward.
WARNING:
This product is not a vehicle for transportation, it should be
used under adult guidance. Parents should ensure that
children have taken the safety measures before using.Picutres
for reference only.
①steering wheel
②button
③dash board
②locked rod under the saddle
①Saddle
1

Assembly instruction
Car assembling should be done by the adults.
Take care of small parts. Choking hazard, keep children
away while assembling. Children under 36 months are
prohibited to use.
Please count all the parts carefully before assembling and
dispose the plastic bag properly.
2
picture 1 picture 2
Openable bonnet, take out the battery box easy for charging
Removable battery is optional, it is under the bonnet, open the
bonnet, it is very easy for charging.
removable battery box
Rear seat with parent-child function
In the state shown in picture 1, child can sit on it; In the state
shown in picture 2, parent can sit on it, parent can play with child
together.
bonnet
battery

1.Front wheel assembling
Turn over the car body, aim the front wheel center to front
axle, press the button on the middle of the wheel, then
insert and push the wheel into place.
2.Rear wheel assembling
Aim the rear wheel center to rear axle, press the button on
the middle of the wheel, then insert and push the wheel
into place.
3
front wheel
rear
wheel
rear
wheel
two motors
/ four motors
six motors

3.Saddle assembling
Turn over the car body, align two tubes under the saddle
with the holes in the car body, push saddle back until
front two plastic hook are aligned with holes on the car ,
fix with screws.
4.Steering wheel assembling
Connect steering wheel wire to the wires coming out of the
steering column and match connectors. Insert the steering
wheel into the steering column until pins into place. Electronic
steering wheel is optional ,it can be adjusted up and down.
Mechanical steering wheel can’t be adjusted.
4
steering
wheel
(optional)
saddle

5. Mirror assembly
Push mirrors into corresponding openings on the car body.
5
6:Battery connection
Mirror
Mirror
Open the bonnet, use support rod to lift it; The battery
connection method of removable and non-removable
battery are same, connect two clip locks of red wires.
Removable battery is optional.
bonnet
battery
charging
port
The battery connection method of removable
and non-removable battery are same, connect
two clip locks of red wires.

WARINING:
Make sure the children have taken guidance before using,
when change the gears, the accelerator should be release
and the car has completely come to a stop. Prohibit to
change the gear while the car is still moving, that can
damage the wire and other transmission parts. Front wheels
have self positioning function.
This car has the auto-reset fuse, if the car stops suddenly
during driving, it is mainly caused by instantaneous current
exceeds ,and make the fuse to trip. Then just stop operating
for about 8 seconds, and this fuse can be reset.
In order to avoid the fuse tripping and cut off power supply,
please pay attention to the following matters:This product
can't overload, two motor function is limited of 60 KGS, four
motor function is limited of 90 KGS, six motor function is
limited of 110 KGS.
Don't drag anything behind products.
Don't let the water or other liquid into the batteries and
other electrical components.
Do not change the circuit system and the structure of the
product.
6
FUSE

CIRCUIT DIAGRAM
7
Steering Motor
Red
CN7
green0.2
front wheels no independent suspension system (optional)
black XH-2
Motor wire connection terminals: 1) red point is positive pole 2) gap is a negative pole Motor connect wire: 1) connecting one motor use 1 square wire 2) connecting two motors use 1.5 squares wire 2) connecting trio motors use 2 squares wire
Wire uncrossed Wire crossed Option: 1.two motor feature is equipped with two driving motors, welding method shown as following 2. four motor feature is equipped with four driving motors, welding method shown as following
Wire connection is as following:
driving motor position
Method for side wire welding of motor
left middle wheel
left front wheel big one
big one big one
Yellow wire welding to red point, green wire welding to the gap Yellow wire welding to red point, green wire welding to the gap Yellow wire welding to red point, green wire welding to the gap
left rear wheel
Connector
driving motor position
Method for side wire welding of motor
Connector
right middle wheel right front wheel
right rear wheel
small one
small one
blue wire welding to red point, yellow wire welding to the gap blue wire welding to red point, yellow wire welding to the gap
small one
blue wire welding to red point, yellow wire welding to the gap
CN4 CN5
BG
VBAT
CN3
CN10
CN1
+
V
LS
R
HS
CH BG
G
SW
-negative pole
+positive pole
DC12V battery
purple0.2
red 2.0
red 2.0
brown2.0
charging port
blue1.0
yellow1.0
gears switch
normally closed contact
steering motor
blue0.5
blue0.2
M
yellow welding to red port（-）
CN8
CN9
brown0.3
orange0.3 orange0.5
orange0.5
brown1.5 x 2
red 1.5 x 2
M
M
CN2
black0.3
yellow0.5
yellow0.2
yellow0.2
orange0.2
green1.0
yellow1.0
brown 0.3
brown
2.0
red
2.0
+12V
GND
yellow welding to red port（+）
lights connected with dashboard
lights control switch
outside accelerator
accelerator option
inside accelerator
right driving motor
CN6
White
Steering Wheel
black0.2
black0.2
black0.2
black0.3
green0.2
red0.2
white0.2
white0.2
FUSE
5 X 20 F6A
steering motor
electronic steering
wheel
Special for steering wheel
All blue sockets control by light-contr ol switch
Maximum current of LED lights, MP3, MP4 power supply can’t exceed 1A.
left driving motor
on /off switch
re-set fuse
1. Need to use 6A fuse; 2. Before changing the fuse, please eliminate the cause of lights short circuit.

8
black XH-2
Motor wire connection terminals: 1) red point is positive pole 2) gap is a negative pole Motor connect wire: 1) connecting one motor use 1 square wire 2) connecting two motors use 1.5 squares wire 2) connecting trio motors use 2 squares wire
Wire uncrossed Wire crossed Option: 1.two motor feature is equipped with two driving motors, welding method shown as following 2. four motor feature is equipped with four driving motors, welding method shown as following
Wire connection is as following:
driving motor position
Method for side wire welding of motor
left middle wheel
left front wheel big one
big one big one
Yellow wire welding to red point, green wire welding to the gap Yellow wire welding to red point, green wire welding to the gap Yellow wire welding to red point, green wire welding to the gap
left rear wheel
Connector
front wheels with independent suspension system (optional)
driving motor position
Method for side wire welding of motor
Connector
right middle wheel right front wheel
right rear wheel
small one
small one
blue wire welding to red point, yellow wire welding to the gap blue wire welding to red point, yellow wire welding to the gap
small one
blue wire welding to red point, yellow wire welding to the gap
Steering Motor
Red
CN7
CN4 CN5
BG
VBAT
CN3
CN10
CN1
+
V
LS
R
HS
CH BG
G
SW
-negative pole
+positive pole
DC12V battery
purple0.2
red 2.0
red 2.0
brown2.0
charging port
blue1.0
yellow1.0
gears switch
normally closed contact
steering motor
blue0.5
M
yellow welding to red port（-）
CN8
CN9
brown0.3
orange0.3 orange0.5
orange0.5
brown1.5 x 2
red 1.5 x 2
M
M
CN2
black0.3
yellow0.5
yellow0.2
orange0.2
green1.0
yellow1.0
brown 0.3
brown
2.0
red
2.0
+12V
GND
yellow welding to red port（+）
lights connected with dashboard
lights control switch
outside accelerator
accelerator option
inside accelerator
right driving motor
CN6
White
Steering Wheel
black0.2
black0.2
black0.2
black0.2
black0.3
green0.2
green0.2
red0.2
red0.2
white0.2
white0.2
FUSE
5 X 20 F6A
steering motor
electronic steering
wheel
Special for steering wheel
All blue sockets control by light-contr ol switch
Maximum current of LED lights, MP3, MP4 power supply can’t exceed 1A.
left driving motor
on /off switch
re-set fuse
1. Need to use 6A fuse; 2. Before changing the fuse, please eliminate the cause of lights short circuit.

SECURITY WARNING
1.The installation and charging of vehicle should be under adult
supervision at all times.
2.This product is limited to the children from 37 to 95months,
limited weight is 60 KGS (two motors)，90 KGS (four motors),
110 KGS (six motors) , please do not overload.
3.This product is ideal for driving on a hard flat surface.
4.Caution:Please switch to the "P"of the gear before
you get on the car.
5.It is strictly prohibited in the streets or the road, pot holes, and
slopes.
6.Avoid driving in the sand or grass or uneven ground.
7.Children should be given full instructions on operation of the car.
Improper operation can cause damage or accidents.
8.While children are driving, it is parents' duty to supervise at all
time to avoid accidents.
9.Avoid driving in rains or flooded pathways. By doing so it can
damage the motor, circuit and other electrical equipments.
10.Battery charger should be regularly inspected by parents to
insure whether the wires, plugs, crusts and other components are
damaged. Please stop using if any damage is found, until it is
completely restored.
11.In order to ensure product life and safety, avoid damage to the
charger, battery or electric circuit, the car must use the default
configuration of a dedicated charger and power supply.
12.Rechargeable batteries should be removed from the toy before
charging.
13.When no use of product, please cut off the product power, and
keep all the switch to "stop" or "off" position.
14.The charge provided is not a toy. To be kept away from
children.
15.Strictly prohibit using the non-manufacturer provided parts.
16.This product is made of PP material mainly, the safe using time
is two years.
9

USAGE DIRECTION
①. When driving the car ,child should sit on the car seat.
②. Adults should always supervise their child when the child
driving.
③. Adult or parents should take more care and guidance when
child driving and can't leave away.
④. Pay attention to the driving environment and driving on the
hard flat surface, not the unsafe environment:
a. The trenches, the riverside, slope or uneven ground;
b. Road or other place for driving and walking;
c. The obstruction which is easily hitting and causing injury;
d. Other unsafely zone.
⑤. Pay attention to the road, trenches, the riverside, slope or
uneven ground.
⑥. Not to be used in public roads.
⑦. The car should be used only in daytime or bright place, avoid
using under low visibility.
⑧. Children can not deal with unexpected obstacles and events.
1. Before using it, make sure that all the following works are
done.
● Step described in accordance with the instructions to
complete the installation of the car, the battery plug-in has
been connected, the power supply has been switched on.
● Make sure that all the positions which need the screws are
fixed tightly.
● Parents or guardian should ensure that children have taken
the safety measures before use.
● To reduce the risk during using:
10

2. Operating(function reference diagram)
Music
LCD display
Next/volume
reduction Previous/volume
increase
MP3
Play/pause
Model
Music Music Music Music
Big memory
Small menory
MP3 Optional
11
MP3/MP4
player
(optional)
charging
port
power
on / off
inner pedal
gear switch
outer pedal
lights
switch pedal
switch

MP4 Optional
Back
File shortcut key
File on demand
shortcut key
Music/ story/
children’s song
Poetry/ cartoon /
photo
TF card
Touch function area
MP4 screen on/off
U dish (default first)
Previous
OK/ Pause
Next
Return to the
home page
Language selection
(Simplified Chinese,
Traditional Chinese,
English, French,
Farsi, Korean)
File management
(File selection in U
dish or TF card)
Battery capacity
U dish/TF card identification symbols
12
F31
V
SD USB FLASHBLE
MP3/ Mode/ Electric capacity display
Play/ Pause
U dish TF card
Bluetooth mode
TF card mark
U dish mark
Flash mode
Volume +
Volume –
Mode switch
Previous
Battery capacity
Bluetooth
Music
Story
Next
Bluetooth name
MP3 Optional
MP3 balance
waveform
microphone slot
microphone slot

Remote control instruction
13
1LED
2LED
3LED
Speed selection
Stop
Speed indicator
Remote indicator light
right
left
The code
(car-select key)
backward
Forward
(1)remote mode: press and hold the speed select button to
chose the proper speed. (1 LED: slow speed; 2 LED: middle
speed; 3 LED: fast speed.)
(2)Manual mode: use gear to select high or low speed.
2.Please select the proper speed during the driving. Manual mode or
remote mode all can be selected.
3.The remote control uses slow start technology, it can reduce impact
force of the traditional controller and protect baby's spine.
4. The “stop” button on remote control can be used in any situation
(after coding successfully), press and hold “stop” button, the car will
stop immediately and can’t operate whether in manual mode or
remote mode. Parents have full control of the remote, it can improve
the security.
5. Press and hold “forward” button on remote control, the car will
move forward; Press and hold “backward” button, the car will move
backward; No operate, the car will not move.
6. Press and hold “left” button on remote control, the car will move
left; Press and hold “right” button, the car will move right;
7. Combine the operation of “left” and “right” button, more fun the
children will get during the driving.
1.Before first using, please code
first, steps are as following:
(1)Press and hold car select
button , until remote indicator light
starts to flash.
(2)Turn on the power, remote
indicator light will be off, indicating
the successful connection with the
car. Release the button, now the
remote control can be used.
(3)If remote indicator light is still
flashing and turn on, try again and
repeat step 1-2.
8. How to adjust the offset position of electronic steering wheel:
This car has electronic steering wheel function(optional), when the
steering wheel on the positive direction, but wheel deviation, you can
adjust the steering wheel according to the following steps (Remote
control needs to successfully connect with the car):

14
1 . When operating the car, the distance between the car which kid
sit in and the adults operating the remote should not be more than 10
meters.
2 .The remote is only for adults to use.
3 .Before using the remote, must read the instruction manual
carefully, and check , only when knowing the way of operation, you
can use the remote with kid in the car.
4.This remote control car should not be in road and water, obstacles,
etc.
5 .Avoid getting the remote control wet in rains.
6 .Don’t mix using the old and new batteries and different brands of
batteries.
7 .If not use the remote control for a long time, it is suggested that to
take out the battery, in order to avoid battery leakage, corrosion
circuit board,so that damage the remote control.
8. Should be avoided fall in the process of remote control.
9. If the remote distance is less than 3 meters, it means the battery is
down in the remote control, it is time to change the 2 pieces of AA
alkaline batteries.
10.Avoid to drop the remote control during using.
11. Install batterise with right polarity, avoid battery short circuit.
12. Charging must be done by adults, Non rechargeable batteries
can't be charged.
13. Run out of battery should be removed from the toy properly and
prevent children from playing.
14. Take out the battery if no use for long time, properly handle the
battery, prevent children from playing.
How to insert batteries: Use screwdriver to
loosen the screw on the back of the
remote control, open the battery cover, and
install two AA 1.5V alkaline type batteries
according to the diagram (Batteries
provide for yourselves), then close the
battery cover,and fix with screw.
WARNING:
AA 1.5V
AA 1.5V
(1).Put the car on flat ground, don’t adjust the steering wheel, make the
steering wheel in middle position, turn on the power.
(2).When the car has been turned on, adjust the steering wheel to make
the wheels in right front position, then make steering wheel to keep still.
(3).Press the “speed selection” switch on remote control for 5 seconds
until speed indicator light start to flash, then release the switch, now
adjusting has finished.
(4).If failed, please repeat the steps 1-3.

CHARGING WAY
●For Safety purpose ,the charging must be done by adults.
●When it is the first time use it, you must open the bonnet, connect two
clip locks on red wires, use it only after charging 8-12 hours.
●Charging socket located inside the dashboard, follow the instructions
to charge the battery.
●If the car has slowed done the momemtum it needs to be charged by
8-12 hours, maximum 20 hours.
1.First insert the plug of the charger into the charging port.
2.Then insert the charger to the power socket. (The car cannot be
started during charging)
WARNING:
1 The toy is to be assembled by an adult. In unassembled state contain
potentially hazardous sharp points & small parts, so please keep out of
baby's reach.
2 CHOCING HAZARD – Small parts.
3 Not for children under 3 yrs.
4 Always wear shoes.
5 RISK OF FIRE. Do not bypass. Replace only with circuit protection device.
6 Protective equipment should be worn. Not to be used in traffic.
15
WARNING:
-Non-rechargeable batteries are not to be recharged;
-Batteries are to be inserted with the correct polarity;
-Exhausted batteries are to be removed from the toy;
-Rechargeable batteries are only to be charged under adult supervision;
-Rechargeable batteries are to be removed from the toy before being
charged.
How to remove batteries: Use screwdriver to loosen the screw on
the back of the remote control, open the battery cover and remove
batteries, then close the battery cover,and fix with screw.

MAINTENANCE AND SERVICE
1.Parents should check whether all the parts are perfect before using, like
battery, charger, wire, plug, out body and other parts are broken,whether
the screw is loose. whether there is potential safety hazard, if found then
it has to repair.
2.Use a small amount of lubricating oil for moving parts, to prevent wear
and tear of rust after using the toys for some time.
3.The car should be far away from the fire and avoid sunlight, store flat,
not upside down the car shall be stored indoors or cover outdoors.
4.The car should be far away from the hot things, like the stove or heater,
the plastic part may melt. When charging ,the car should be far away
from the inflammable material to prevent it from fire.
5.Charging in time after using, and charging work must be done by
adults, if the product is going to unused for long time it must be fully
charged, and charge it every months ,so that to extend the battery
lifespan.
Attention:
·Can only use the charger and battery according to manufacturers
regulations.
·Do not mix old and new or different types of batteries.
·The battery terminal should not be short circuit.
·Do not open the battery or charger.
·Do not reverse the battery.
·Before charging, please check the charger, battery and plug whether are
ok, if you find any broken parts, you must stop using it immediately. And
do not use it until it is fully repaired.
·The battery will be little warm when being charged, it is normal. If not, it
may be caused from the short circuit of charger or circuit board.
·Must use the pressing plate to fix the battery.
·Run out of battery must be handled by adults, remove the batteries
which is run out, from toys to recycle properly and shall not be arbitrarily
discarded.
·If the product is going to be stored unused long time , it must be fully
charged, and charge it every 3 months ,so that to make sure the battery
life.
·Charger and Battery are not toys. Keep it away from children.
16

TROUBLESHOOTING
If the battery is not fully charged. Need to be charged in time
If there is an issue with the wheels
If the wheels stuck and cannot move
If the pedal switch is not functioning properly
If “power” switch is in OFF position
If the fuse is not functioning properly
If the battery is not connected, check the red and black wires.
If the charger is plugged in, car will not power on. Unplug charger.
If rider weight exceeds specifications
If the charger is malfunctioning
If the battery lost its capacity
If the charger and battery connection is charged
Battery does
not charge
Car moves
slow
Car does not
move or
power on
6.Must use the soft cloth to clean the car, do not use chemical solvents
to wipe the toy plastic parts, do not use soap and water to clean the car,
driving in rainy or snowy weather, water will damage the motor, the
vehicle's battery and circuit system.
7.When stop or storage the car, please cut the power and make all the
switch to “STOP” or “OFF” position.
8.Do not use the fuse which is not same with this product specifications.
9.Do not change the product structure and circuit system, maintenance
and repair work must be under the guidance of the professional or
technical personnel in place.
10.Don't put toys for other purposes. Put the battery in the right polarity.
11.It is forbidden to battery is negative short circuit. Non rechargeable
batteries, can't charge.
12.Chargeable batteries can only be charged adult the guardianship of
adults.
13.Don’t mix the old or new batteries or different type of batteries.
14.Run out of battery should be removed from the toy properly and
prevent children from playing.
15.Disconnect the battery completely if not in use and prevent children
from playing.
17

PINGHU SHUANGXI BABY CARRIER MANUFACTURE CO.,LTD.
PINGHU BABY CARRIER INDUSTRY CITY, ZHEJIANG, CHINA