Holman GreenWall GW0055 User manual

Assembly
Step 1
Please ensure that the arrow marks on the Frame Clips are
pointing upwards. When joining together, place the Frame Clips
above the groove and slide down until they click into the groove.
Assembly Continued
Step 3 Step 4 Step 5 Step 6 Step 7
Step 2
Please remove the plastic joiners from in-between
the Wire Frames and recycle correctly.
Overview Continued
Mobile Garden Kit
Manual
PRODUC T CODE
NEW MODEL
WITH
IMPROVED
INSTRUCTIONS
AND
ASSEMBLY!
Introduction
The benefit of the GreenWall®Mobile Garden Kit is that it can
be easily moved around according to the amount of sunlight the
different types of plants require. This has a big bearing on what
will grow successfully. Also think about where your water source
will be and how easily you can run a hose from that tap.
This instruction manual contains useful information on the proper use
and care of this product. Please read through all instructions before
attempting to assemble the kit to ensure it is properly put together
before use. Please keep this user guide handy for future use.
Overview
Mobile Garden Kit
a. 16 x Left Frame Clips
b. 16 x Right Frame Clips
c. 9 x Small GreenWall®Pots with mesh bases
d. 1 x Metal Frame with Wire Base
e. 1 x Metal Frame
f. 4 x Frame Hangers
g. 2 x Front Wheel Poles
h. 2 x Back Wheel Poles
i. 2 x Short Frame Poles
j. 2 x Long Frame Poles
k. 2 x GreenWall®Planters with mesh bases
l. 1 x Pre-Assembled Irrigation Kit
GW0055
l.

Thanks for being a
#SMARTGARDENER
We really appreciate having you as a customer, and
would like to say thank you for choosing us.
We recommend registering your new product on our website.
This will ensure we have a copy of your purchase and activate
an extended warranty. Keep up to date to with relevant product
information and special offers available through our newsletter.
www.holmanindustries.com.au/product-registration/
Thanks again for choosing Holman
Assembly Continued
Step 8 Step 9 Step 10
Repeat Steps 7 - 8 until all of the Frame Hangers have
been placed on the poles. Place one set of Frame Clips
and one Frame Hanger on the grooves at one time.
Step 11
Irrigation Assembly
Step 1
Unwind the Pre-Assembled Irrigation Kit and place into
the GreenWall®Pots with the below configuration. This is
to ensure even water distribution between the pots.
Step 2
Make sure the dripper is placed in the middle of the GreenWall®Pots,
using the grooves on the back of the pots, push the tubing into place.
Optional: Use cable ties to secure the tubing around the poles.
Step 3 Step 4
For further instructions and tutorials,
head to our YouTube Channel!
l.