Holman RGB1505 User manual

Instruction Manual
500mm x 500mm x 150mm
Should you have any questions about this product or its operation
please telephone our customer service helpline on 1300 716 188.
HOLMAN offer a 3 year replacement warranty from the original date of purchase.
HOLMAN offer no guarantee or compensation for subsequent damage
or waste of water.
It is the responsibility of the user to check that the product is
always operating satisfactorily.
To claim warranty the product MUST be returned with a copy of the original receipt.
We will honour all statutory guarantees that this product is of acceptable quality
(including that it is fit for purpose). Product images may change without notice.
Head Office / Service
11 Walters Drive, Osborne Park WA 6017
Ph: [phone] Fax: [phone]
[email protected]
www.holmanindustries.com.au
Copyright 2018 Holman Industries Product Code: RGB1505

Contents List
4 × 500mm × 150mm panels
4 × 160mm corner pillars
4 x caps
4 x feet
5 × mesh pots
1 × drip tray lid
1 x drip tray
Installation
1. Location is important when growing
plants in a raised garden bed. Depending
on the type of plants and the amount of
sun light exposure required, choose a full
or part sun location for your garden bed.
2. Place the feet on the end of each pillar.
3. Slot the panel in the pillar with the
tongue facing up. Do the same for each
one.
4. Once all the panels are placed, install the caps on top
of the pillars.
5. Place the drip tray into the base of the raised garden bed, then
place the tray lid on top on the drip tray.
6. Place all 5 mesh wells in the hole cut outs in the tray lid.
7. Fill the Raised Garden Bed with potting mix and plant you
herbs, vegetables or flowers.
A
A
C
C
E
B
B
D
F
G
F
G
ED