HOMCOM A2-0055 User manual

OFFICE CHAIR
IMPORTANT-KEEP THIS INFORMATION FOR YOUR
SUBSEQUENT CONSULTATION: READ CAREFULLY
SAFETY INFORMATION
• Maximum weight: 200 KG
• To prevent the chair falling, make sure that the weight is evenly distributed.
• Remove all parts from the box and make sure all parts are included before
assembly.
•Keep your feet always on the floor and do not press your head on the headrest
when you recline the chair.
• When you adjust the backrest, make sure your fingers are safe and out of
harm's way.
• To avoid damage, never pull fast and strongly in your house.
• This chair is designed to sit only and nothing else.
• Don’t use it as a base or as a ladder.
• Don’t sit in the arms of the chair.
• This chair is designed to seat only one person at same time.
• If some parts are missing, damaged or worn, stop using it immediately.
• Avoid direct sunlight on the chair so that the plastic components won’t become
brittle.
MAINTENANCE INSTRUCTIONS
• Clean with vacuum cleaner.
• Wipe with a fabric dampened with water.
Warning! The replacement and repair of the
components for the adjustment of the height
of the chair with accumulators of energy must
be carried out only by qualified personnel.
Importer
MH STAR UK LTD
Unit 27, Perivale Park,
Horsenden lane South
Perivale, UB6 7RH
https://www.aosom.co.uk
Made in China

Product operation instruction
Using strong decontamination products is forbidden (such as scrubbing powder,
chemical solvent, turpentine, shoe polish or other improper solutions).
Keep a distance of 8-12 inches away from radiating objects, and avoid direct
sunshine.
Do not wipe the leather with strong strength. Your office chair needs a good care.
Cleaning & maintenance:
When cleaning, dilute suds is needed for slightly wiping. And use soft cleaning
cloth after washing.
Max. load capacity is 120kg.
Please sit in the middle of the chair plate. Do not incline to front, back, left or right to avoid falling down.
Standing on the chair is forbidden for fear that you may fall down from the chair due to the centre-of-gravity shift.
Rock the chair gently. Strong impact on tilt mechanism will make you fall down.
Do not hit the chair by hard objects or scratch the leather’s surface by edge tools.
Tighten the screws every three month especially the joint point between back and seat for safer use
For these chairs with reclining function please ensuring lock the tilt mechanism （push in the handle bar）as figure
before you using reclining function
Assembling hints: Align all the screws at the screws holes before fully tighten a screw to decrease the tolerance of
assembly