Home Decorators Collection Athens SP5663 User manual

THANK YOU
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators Collection!
USE AND CARE GUIDE
Athens 63 in. Media Console Electric Fireplace with Bluetooth in Black
100000000/SP5663
QUESTIONS, PROBLEMS, MISSING PARTS? BEFORE RETURNING TO THE STORE,
CALL HOME DECORATORS COLLECTION CUSTOMER SERVICE
8 A.M. - 7 P.M., EST, MONDAY - FRIDAY, 9 A.M. - 6 P.M., EST, SATURDAY
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS

2
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Safety Information.....................................................3
Warranty .....................................................................4
Pre-Assembly.............................................................5
................................................... 5
Product
Tools Required
Hardware
S ....................................................... 5
................................................................... 5
Package Contents.............................................................. 6
Assembly .................................................................. 7
Operation .................................................................14
Fireplace Remote APP Download .......................17
Using the Fireplace Remote App
18
.........................
FCC/IC Information................................................. 20
Care & Maintenance ............................................... 20
Troubleshooting.......................................................22
Table of Contents

3
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Please read and understand this entire manual before attempting
to assemble, operate or install the product. If you have any question
regarding the product,pleasecall customer service at
1-800-986-3460,8 a.m.-7 p.m., EST,
Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday.
When using electrical appliances,basic precautions should always
persons including the following:
SAFETY INFORMATION
WARNING: This appliance is hot when in use. To avoid
burns, DO NOT let bare skin touch hot surfaces. Keep
combustible material, such as furniture, pillows, bedding,
papers, clothes and curtains, at least 3 feet from the front
of the heater and keep them away from the sides and rear.
WARNING: Extreme caution is necessary when any
heater is used by or near children or individuals with
disabilities and whenever the replace is left operating
and unattended.
DANGER: If the information in this manual is not
followed exactly, an electric shock or re may result
causing property damage, personal injury or loss of life.
WARNING: Do NOT insert or allow foreign objects to
enter any ventilation or exhaust opening as this may
cause an electric shock or re, or damage the appliance.
CAUTION: DO NOT operate any heater with a damaged
cord or plug or after the heater malfunctions.
CAUTION: Any repairs to this replace should be
carried out by a qualied service person.
CAUTION: The heaters MUST NOT be located
immediately below a socket-outlet.
CAUTION: DO NOT slide insert on top of wood to avoid
scratching wood surface.
CAUTION: DO NOT place any objects on top of insert
and top air intake vents as this will cause unit to overheat
and can cause a re.
NOTE:
SAVE THESE
INSTRUCTIONS
CAUTION: ONLY connect to properly grounded outlets.
CAUTION: Under no circumstances should this
replace be modied. Parts having to be removed for
servicing must be replaced prior to operating this replace
again.
CAUTION: This heater is not intended for use in
bathrooms, laundry areas and similar indoor locations.
NEVER place heater where it may fall into a bathtub or
other water container.
CAUTION: DO NOT operate any heater if it has been
dropped or damaged in any manner. Disconnect power at
service panel and have heater inspected by a reputable
electrician before reusing.
CAUTION: To prevent a possible re, DO NOT block air
intakes or exhaust in any manner. DO NOT use on soft
surfaces, like a bed, where opening may become blocked.
CAUTION: ALWAYS plug heaters directly into a wall
outlet/receptacle. NEVER use with an extension cord or
relocatable power tap (outlet/power strip).
Read all instructions before installing or using the heater.
DO NOT run cord under carpeting. DO NOT cover cord with
throw rugs, runners, or similar covering. Do not route cord
under furniture or appliances. Arrange cord away from trafc
areas and where it will not be tripped over.
If possible, ALWAYS unplug this appliance when not in use.
DO NOT use outdoors.
DO NOT run cord under carpeting. DO NOT cover cord with
throw rugs, runners, or similar covering. Do not route cord
under furniture or appliances. Arrange cord away from trafc
areas and where it will not be tripped over.
This appliance, when installed, must be electrically grounded
in accordance with local codes, with the current CSA C22.1
Canadian Electrical Code or follow the National Electrical Code,
ANSI/NFPA N0.70.
This appliance has hot and arcing or sparking parts inside. DO
NOT use it in areas where gasoline, paint or ammable vapors
or liquids are used or stored. This replace should not be used
as a drying rack for clothing. Christmas stockings or
decorations should not be hung in the area of it.
There is a thermostat protective device provide inside of unit.
If the inner temperature overheats or abnormal heating
occurs, the thermostat protective device will cut off power
supply to prevent damage or risk of re.
1.
2.
3.
4.
5.
6.
7.
8.

4
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
1 Year Limited Warranty: The manufacturer warrants this product to be free from manufacturing and material defects for a period of one
year from date of purchase, subject to the following conditions and limitations:
1. Install and operate this Electric Fireplace in accordance with the installation and operating instructions furnished with the product
at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
2. This warranty is non-transferable and is made to the original owner, provided that the purchase was made through an authorized
supplier of the product.
3. The warranty is limited to the repair or replacement of part(s) found to be defective in material or workmanship, provided that
such part(s) have been subjected to normal conditions of use and
inspection.
4. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale
price of the defective part(s).
5. Any installation, labor, construction, transportation, or other related costs/expenses arising from defective part(s), repair,
replacement, or otherwise of same, will not be covered by this warranty, nor shall the manufacturer assume responsibility
for same.
6. The owner/user assumes all other risks, if any, including the risk of any direct, indirect or consequential loss or damage arising out
of the use, or inability to use the product, except as provided by law.
7. All other warranties – expressed or implied – with respect to the product, its components and accessories, or any obligations/
liabilities on the part of the manufacturer are hereby expressly excluded.
8. The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other liabilities with respect to
the sale of the product.
9. The warranties as outlined within this document do not apply to non-accessories usedin conjunction with the installation of
this product.
10. T
This warranty is void if:
a. T
b. There has been unauthorized alteration, willful abuse, accident, or misuse of the product.
c. You do not have the original receipt of purchase.
Warranty
Safety Information (continued)
Warranty
Warranty
A 15-amp, 120-volt, 60 Hz circuit with a properly grounded outlet is required.
Preferably, the replace will be on a dedicated circuit as other appliances on the
same circuit may cause the circuit breaker to trip or the fuse to blow when the
heater is in operation. The unit comes standard with 6-ft. three-wire cord, exiting
from the rear of the replace. DO NOT exceed the current rating of the current tap.
ALWAYS plug this unit directly into a wall outlet/receptacle. NEVER use with an
extension cord or relocatable power tap (outlet/power strip).
This rebox is for use on 120 volts. The cord has a plug as shown below. See
illustration for grounding instruction. An adapter as shown at C is available for
connecting three-blade grounding-type plugs to two-slot receptacles. The green
grounding lug extending from the adapter must be connected to a permanent
ground such as a properly grounded outlet box. The adapter should not be used if
a three-slot grounded receptacle is available.
□
□
ELECTRICAL CONNECTION
Grounding Pin
Metal
Screw
Cover of
Grounding
Box
Grounding Pin
Grounding Means
Adapter
C
A
D
B

5
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-Assembly
□ Before you begin, locate the instructions and hardware. Be sure you have all of the parts and can identify them.
□ To avoid scratching the nish, assemble the product on a soft, non-abrasive surface such as carpet or cardboard.
□ Assembly of this product may require more than one person.
HARDWARE
PRODUCT SPECIFICATIONS
PLANNING ASSEMBLY
TOOLS REQUIRED
AA FF GG
HH II JJ KK LL MM
BB CC DD EE
NOTE: Hardware not shown to actual size.
NOTE: Number of the hardware in ( ) is separated for
backup.
Part Description Quantity
AA Shelf Clip
Bolt
Screw
Plastic Bracket - 2 holes
Hex Key
8
BB 46 + (2)
CC 18 + (2)
DD 23
EE 1
Touch-Up Pen
Wooden Dowel
Handle with Bolt
FF 1
GG 8
HH 2
Part Description Quantity
Safety Mounting Tap
Screw for Mantel
Screw for Wall Anchor
II 2
JJ 2 + (1)
KK 2 + (1)
Washer
Wall Anchor
LL 4 + (2)
MM 2
Voltage 120 VAC, 60 Hz
Amps 12.5 Amps
Watts 1500 Watts
Philips Screwdriver Hand Drill
WARNING: The included plastic wall anchors (OO) are
intended for use with solid wall applications only
(tile and concrete). DO NOT USE WITH DRYWALL OR OTHER
HOLLOW WALL APPLICATIONS.

6
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-Assembly
PACKAGE CONTENTS
Part Description Quantity
A Base
Feet
Side Panel
Inner Left Panel
Inner Right Panel
1
B 6
C 2
D 1
E 1
Insert Left Front Trim
Insert Right Front Trim
F 1
G 1
Part Description Quantity
Insert Top Front Trim
Top Panel
H 1
I 1
Back Panel
Shelf
J 2
K 2
DoorL 2
Insert (SP2814-IR-FGPBBT)
Remote Control
M 1
N 1
C
K
K
J
J
C
L
I
L
A
E
H
G
D
B
BB
B
B
F
B
M
N

1Attaching plastic brackets
Attach the Plastic Brackets (DD) to the Insert Top Front Trim (H) by using three Bolts (BB) shown as below.
2Attaching plastic brackets
Attach the four Plastic Brackets (DD) to each Side Panel (C) by using four Bolts (BB) shown as below.
7
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly
H
BB BB BB DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
BB
BB
BB
BB
BB
BB
C
C
BB
BB

3Attaching plastic brackets
Attach six Plastic Brackets (DD) to the Inner Right Panel (E)
by using six Bolts (BB) shown as below.
4Installing the insert right front trim
Insert the Right Front Trim (G) to the Inner Right Panel (E)
by using two Bolts (BB) shown as below.
5Attaching plastic brackets
Attach six Plastic Brackets (DD) to the Inner Left Panel (D)
by using six Bolts (BB) shown as below.
6Inserting the insert left front trim
Insert the Left Front Trim (F) to the Inner Left Panel (D) by
using two Bolts (BB) shown as below.
8
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
BB
DD
DD
DD
DD
DD
DD
BB
BB
BB
E
BB BB
BB
BB
E
G
D
D
F
BB
BB
BB
BB
BB
BB
DD
DD DD
DD
DD
DD
BB BB

7Installing the hinge and handle
Install the Handle (HH) to each Door (L) by inserting the bolts through the Doors (L) and turning clockwise into the Handle (HH).
8Installing the feet
Screw the six Feet (B) to the Base (A) shown as below.
9
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
L
HH
B
BB
B
B
A
B
L
HH

9Assembling the base
Insert four Wooden Dowels (GG) into the
pre-drilled holes in the Base (A) as shown.
Install two Side Panels (C), Inner Right Panel
(E) and Inner Left Panel (D) to the Base (A) by
using eight Bolts (BB) as shown.
Insert four Wooden Dowels (GG) into the
pre-drilled holes in the Insert Top Front Trim
(H). Install the Top Front Trim (H) as shown.
10 Assembling the top panel
Install the Top Panel (I) by using eleven Bolts
(BB) as shown.
Secure the Insert Top Front trim (H) by
using two Screws (CC) as shown.
10
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
I
BB BB BB BB
BB
BB
CC
BB
A
D
C
H
E
C
BB BB
BB
GG
GG
GG
GG
GG
GG
GG
GG
BB
A
D
C
H
E
C
BB
BB
II
II
II
GG
II
II
II
GG
BB
A
E
C
BB BB
BB
GG
II
GG
II
BB
CC
H
BB BB

11 Installing the back covers
Install the Back Covers (J) by using sixteen Screws (CC) as shown.
12 Installing the doors and shelves
Tighten the screws to attach the hinges to the hinge plates on the
Doors (L) as shown.
Insert the eight Shelf Clips (AA) into the interior of the Side
Panels (C, D & E). Be sure to insert the pins parallel to one
another to ensure the Shelves (K) are level.
Insert the Shelves (K) onto the Shelf Clips (AA) with the
nished side visible.
11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
J
J
CC CC
CC
CC
CC
CC
CC
CC
CC CC CC
CC
CC
CC CC
CC
D
C
II
II
II
II
L
K
AA

13 Installing the insert
Loosen the pre-attached screws and remove the two mounting brackets attached
to the back of the Insert Right Front Trim (G) and Insert Left Front Trim (F).
Lift the replace insert carefully into the back of the unit and center in the insert
in the opening. Do not drag the insert across the Base (A) as it may
scratch your unit.
14 Installing the insert
Re-install the two mounting brackets and secure the insert in place by
tightening the mounting bracket screws and make sure the insert is
securely in place.
12
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
M
M

15 Installing the Anti-tip over device
Drill two holes into the wall and insert Wall Anchor (MM). Then install the Safety Mounting Tape (II) on the top rear of the
Top Panel (I) using a Washer (LL) and Screw (JJ). Attach opposing side of the Safety Mounting Tape (II) using Washer (LL)
and Screw (KK) fastened into Wall Anchor (MM).
13
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
II
I
LL
JJ
MM
LL
II
KK
WARNING: If installing the mantel on drywall or other hollow
wall applications, the Safety Mounting Tape (II) must be fastened to
studs, headers, or other structural wall members. The included
plastic Wall Anchors (MM) are intended for use with solid wall
applications only (tile or concrete). DO NOT USE WITH DRYWALL OR
OTHER HOLLOW WALL APPLICATIONS.

14
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
OPERATION
Control Panel
Display
The replace can be operated by either the remote control or the control panel.

NOTE: The unit has a memory function with last settings
for heating level and ame brightness effect, unless the main
power to the unit has been interrupted.
NOTE: Hold the Mode button for 3 seconds. This allows
the temperature unit to change from °C to °F or °F to °C. The
unit default is °F. This function is only available if using the
control panel.
NOTE: When you plug in the unit each time, the fan runs
for 5 seconds followed by the heater.
15
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation
OPERATION (CONTINUED)
1
3
Powering the Fireplace
Adjusting the Heater
2Mode Button
Setting the Timer
4
Press the Mode button to cycle through the different
functions. Each time the Mode button is pressed, the
mode will enter the next function - Temperature, Timer,
Logset Brightness, Flame Brightness or Flame Color.
Push the Power button again to turn off all functions.
Push the Power button to supply power to all functions of
the replace and put the insert in a standby mode.
When the unit is in ON mode, the power icon indicator light
is green.
When the unit is in OFF mode, the power icon indicator
light is red. When the power is OFF, the unit stops working.
If the heater was operating before the power was turned
OFF, the fan will continue to run for 20 seconds to ensure
there is no heat trapped inside the unit.
The temperature mode controls the heater’s thermostat
setting.
Pressing the Up or Down “ ” buttons to select the
desired temperature.
The thermostat setting range is 59°F (15°C) to 86°F (30°C),
ON & OF (OFF).
When the ambient temperature is higher than the set
temperature, heater will turn off automatically.
The timer setting shoud be used to set the countdown for
the unit’s main power.
Push the Mode button to enter timer mode.
Press the Up or Down “ ” buttons to adjust the
timer setting from 0 hour (OFF) to 9 hours with 0.5 hour
interval.

Adjusting the Logset Brightness
5The logset brightness mode should be used to set the
logset brightness.
Use Up or Down “ ” buttons to scroll through the
logset brightness settings:
L0 (lowest), L1, L2, L3, L4, L5 (brightest).
6Adjusting the Flame Brightness
The ame brightness mode should be used to set the ame
brightness.
Use Up or Down “ ” buttons to scroll through the
ame brightness settings:
F0 (Flame OFF), F1, F2, F3, F4, F5 (brightest).
16
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation
OPERATION (CONTINUED)
NOTE: Child lock function is only available if using the
control panel.
7Adjusting the Flame Color 8Using the Child Lock feature
The ame color mode should be used to set the ame
color.
When the unit is ON, hold the Power button for 10 seconds
to activate the Child Lock function. E3 will be
displayed and the unit beeps 3 times to indicate that the
child lock is activated. All function keys are locked. When
you press any button when the child lock is activated, E3
displays.
To deactivate the Child Lock function, hold the Power
button for 10 seconds.
Use Up arrow button or Down arrow button to scroll
through the ame color settings: C1, C2, C3, C4
ColorSetting
C1
C2
C3
C4
Yellow
Blue
Yellow + Blue
Auto Change
(Logset brightness
Fade In / Fade Out)

17
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation
Fireplace Remote App Download
To get started using the Fireplace Remote app, download the Fireplace Remote app
from the iTunes App Store or Google Play App Store by searching for “Fireplace Remote
Source Pro” or scan the QR code below for direct links to the iTunes and Google Play
app stores.
DOWNLOAD THE FIREPLACE REMOTE APP
Scan QR Code to Download App
SPECIFICATIONS
Bluetooth ID D031809
Bluetooth Version 4.1

NOTE: You can use this app to connect to multiple
replaces.
NOTE: Only one Fireplace Remote app can connected to
the heater at one time.
NOTE: If the device fails to connect the heater check that the heater is
powerd on and that bluetooth is enabled on the iOS or Android device.
To Connect
1
To Disconnect
2
Turn on the replace.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 6
Fig. 7
Fig. 5
Fig. 8
Fig. 9
Switch on Bluetooth on your mobile device.
To remove your replace from your Apple device, tap
the "X" next to the replace name that you want to
remove. (Fig. 8)
To remove your replace from your Android device,
hold down on to the name until the options appear, then
select "Delete". (Fig. 9)
Tap the side menu icon (Fig. 1).
Tap "+" or "Add" icon (Fig. 2) and start searching for the
replace nearby (Fig. 3).
Tap “FirePlace” in the result. Enter the name of the
replace (Fig. 4) and wait for it to connect (Fig. 5).
Blue dot next to the replace name indicates that the
replace is connected properly and ready to use (Fig. 6).
Return to main page by tapping the side menu icon.
Make sure that the top-right corner icon is switched "ON" (Fig. 7).
18
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation
Using the Fireplace Remote App

Control Screen
Fig. 10
Fig. 11
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 12
(Fig. 10)
19
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation
Using the Fireplace Remote App (continued)
Timer Screen
Press "+" or "-" to adjust the Ember Bed Brightness settings:
L0 (dimmest), L1, L2, L3, L4, L5 (brightest).
Press "+" or "-" to adjust the Temperature settings:
59°F – 86°F (15°C – 30°C), ON, OFF.
Press "+" or "-" to adjust the Flame Brightness settings:
F0 (no ame), L1, L2, L3, L4, L5 (brightest).
Press "+" or "-" to adjust the Flame Color settings:
C1, C2, C3, C4.
ColorSetting
C1
C2
C3
C4
Yellow
Blue
Yellow + Blue
Auto Change (Logset brightness Fade In / Fade Out)
NOTE: As you change the ame color, the ame showing
on Control Screen will change its color accordingly.
Settings Screen
When the timer reaches 00:00, the replace will automatically
turn off. To stop the timer, press "Stop". (Fig. 12)
Change the temperature unit to °F or °C. (Fig. 13)
Edit Fireplace Name
To edit the replace name on your Apple device, hold down on its
name until the cursor blinks inside the text box, then retype. (Fig. 14)
Turn Off Fireplace
Turn off your replace by tapping the switch on the top right
corner. (Fig. 16)
To edit the replace name on your Android device, hold down on
its name until the "Rename" option appears, then select and
retype. (Fig. 15)
Press " " or " " to set the Timer from 00:00 to 09:00 in
30-minute intervals. Press "Start" to begin. (Fig. 11)

Please read and understand this entire manual before attempting to assemble, operate or install the product.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
□Reorient or relocate the receiving antenna
□Increase the separation between the equipment and the receiver
□Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
□Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada Licence-exempt RSS-210. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
CAUTION: To maintain compliance with the RF exposure guidelines, place the base unit at least 20cm from nearby persons.
WARNING: Changes or modications to this unit not expressly approved by party responsible for compliance could void the
user’s authority to operate the equipment.
□Make sure the unit is turned OFF, unplugged and the heating elements of heater are cool whenever you are cleaning the heater.
□Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or household cleaners as these products will
damage the metal trim.
□The motors used on the fan and the ame generator assembly are pre-lubricated for extended bearing life and require no further
lubrication. However, periodic cleaning/vacuuming of the fan/heater and air intake/output vents is recommended.
□Any other servicing should be performed by an authorized service representative.
20
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation
FCC/IC Information
Operation
CARE AND MAINTENANCE
WARNING: Make sure the power is turned off before
proceeding. Any electrical repairs or rewiring of this unit
should be carried out by a licensed electrician in
accordance with national and local codes.
WARNING: Disconnect power before attempting any
maintenance or cleaning to reduce the risk of re,
electrical shock or personal injury.
WARNING: During any service of this appliance, the
power to the unit must be turned off. First turn the main
power switch to the “OFF” position. Then remove the
electrical plug from the wall outlet.
WARNING: If repairing or replacing an electrical
component or wiring, the original wire routing, color
coding and securing locations must be followed.
WARNING: Electrical outlet wiring must comply with
local building codes and other applicable regulations to
reduce the risk of re, electrical shock and injury to
persons.
WARNING: Do not use this replace if any part of it
has been under water. Immediately call a qualied
service technician to inspect the replace and replace any
part of the electrical system.