Home Decorators Collection Matias User manual

THANK YOU
We appreciate the trust and condence you have placed in Home Decorators through the purchase of this electric replace. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators Collection!
USE AND CARE GUIDE
MATIAS WALL MOUNT
1001369832/36II200CGT
QUESTIONS, PROBLEMS, MISSING PARTS? BEFORE RETURNING TO THE STORE,
CALL HOME DECORATORS COLLECTION CUSTOMER SERVICE
8 A.M. - 7 P.M., EST, MONDAY - FRIDAY, 9 A.M. - 6 P.M., EST, SATURDAY
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS

2
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Safety Information.....................................................3
Warranty ..................................................................... 4
Pre-Operation ............................................................5
Pre-Assembly............................................................. 6
Hardware Included ................................................... 6
Product Specications....................................................... 6
Tools Required................................................................... 6
Package Contents.............................................................. 7
Installation Options ...................................................8
Wall Hanging ........................................................... 9
Pedestal Base.................................................................. 13
Fuel Bed Setup Instructions............................................. 15
Operation .................................................................16
FCC/IC Information......................................................... 19
Care & Cleaning.......................................................19
Troubleshooting....................................................... 20
Replacement Parts..................................................21
Table of Contents

3
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
WARNING:
This appliance has hot and arcing or sparking parts
inside. Do not use it in areas where gasoline, paint or ammable
liquids are used or stored.
NOTE:
SAVE THESE
INSTRUCTIONS
Please read and understand this entire manual before attempting
to assemble, operate or install the product. If you have any question
regarding the product, please call customer service at service at
1-800-986-3460, 8 a.m.-7 p.m., EST,
Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday.
When using electrical appliances, basic precautions should always
be followed to reduce the risk of re, electrical shock, and injury to
persons including the following:
1. Read all instructions before using this appliance.
2. If possible, always unplug this appliance when not in use.
3. Only a qualied service person should repair this product.
4. Do not use outdoors.
5. Do not cover the cord under the carpeting. Do not cover
with throw rugs, runners or the like. Arrange the cord away
from trafc areas and where it will not be tripped over.
6. To disconnect this appliance, turn the controls to the off
position, and then remove the plug from the outlet.
7. Connect to properly grounded outlets only.
8. This appliance, when installed, must be electrically
grounded in accordance with local codes or, in the
absence of local codes, with the current CSA C22.1
Canadian Electrical Code. For U.S.A. installations, follow
local codes and the National Electrical Code, ANSI/NFPA
NO.70.
9. This appliance has hot and arcing or sparking parts inside
Do not use it in areas where gasoline, paint or ammable
liquids are used or stored. This replace should not be
used as a drying rack for clothing. Do not hang Christmas
stockings or other decorations on or near this product.
10. There is a thermostat limiter inside the heater. When inner
temperature overheating or abnormal heating occurs, the
thermostat protective device will cut off the power supply
to avoid damage to the replace or risk of re.
WARNING:
Use extreme caution when operating heater
near children and the disabled.
DANGER:
In order to avoid overheating, do not cover the
heater.
CAUTION:
Never leave the heater operating unattended.
Extreme caution is necessary if children or invalids are nearby.
WARNING:
This appliance is hot when in use. To avoid
burns, do not touch hot surfaces with bare skin. If provided,
use handles when moving this appliance. Keep combustible
materials, such as furniture, pillows, bedding, papers, clothes
and curtains at least 3 ft. (0.9 m) from the front of this appliance.
WARNING:
Do not insert or allow foreign objects to enter
any ventilation or exhaust opening as this may cause an electric
shock or re, or damage the appliance.
WARNING: To prevent a possible re, do not block air intakes
or exhaust in any manner. Do not use on soft surfaces, like a bed,
where the opening may become blocked.
NOTE:
To avoid injury from unexpected starting or electrical
shock, do not plug the power cord into a source of power during
unpacking and assembly. The cord must remain unplugged
whenever you are adjusting/assembling the replace.
If any part is missing or damaged, do not attempt to use or
plug in the power cord until the missing or damaged part is
correctly replaced. To avoid electric shock, use only identical
replacement parts when servicing double-insulated tools.
WARNING:
Use this appliance only as described in the manual.
Any other use not recommended by the manufacturer may cause
re, electric shock or injury to persons.
WARNING: Under no circumstances should this fireplace be
modied. Parts that must be removed for servicing must be
replaced prior to operating this replace again.
WARNING: If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
WARNING: This heater is not intended for use in bathrooms,
laundry areas and similar indoor locations. Never locate this
appliance where it may fall into a bathtub or other water container.
WARNING: This appliance is not a toy. Supervise children
playing near it.
WARNING: Do not use surge protectors or extension cords
with this product.
Safety Information

4
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
1 Year Limited Warranty: The manufacturer warrants this product to be free from manufacturing and material defects for a period of one
year from date of purchase, subject to the following conditions and limitations:
1. Install and operate this Electric Fireplace in accordance with the installation and operating instructions furnished with the product
at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
2. This warranty is non-transferable and is made to the original owner, provided that the purchase was made through an authorized
supplier of the product.
3. The warranty is limited to the repair or replacement of part(s) found to be defective in material or workmanship, provided that
such part(s) have been subjected to normal conditions of use and service, after said defect is conrmed by the manufacturer’s
inspection.
4. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale
price of the defective part(s).
5. Any installation, labor, construction, transportation, or other related costs/expenses arising from defective part(s), repair,
replacement, or otherwise of same, will not be covered by this warranty, nor shall the manufacturer assume responsibility
for same.
6. The owner/user assumes all other risks, if any, including the risk of any direct, indirect or consequential loss or damage arising out
of the use, or inability to use the product, except as provided by law.
7. All other warranties – expressed or implied – with respect to the product, its components and accessories, or any obligations/
liabilities on the part of the manufacturer are hereby expressly excluded.
8. The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other liabilities with respect to
the sale of the product.
9. The warranties as outlined within this document do not apply to non accessories used in conjunction with the installation of
this product.
10. This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
This warranty is void if:
a. The replace is subjected to prolonged periods of dampness or condensation.
b. There has been unauthorized alteration, willful abuse, accident, or misuse of the product.
c. You do not have the original receipt of purchase.
Warranty
Warranty

5
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-Operation
1. Remove the product identication sticker from the front of the replace.
Product
Identication
Sticker
2. Attach the Product Identication Sticker to this Manual below for future reference. This information is used for product registration and
also is necessary for customer service.
3. Go to homedepot.com/homedecorators for product warranty registration. If you are unable to complete registration, save your proof of
purchase for warranty purposes.
Attach Product Identication Sticker Here
Model / Modèle / Modelo: 36II200CGT
SN #: AB-12345-A
Keep this number for service!
Gardez ce numéro pour le service!
Mantega este número para servicio!

6
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Part Description Part Number Quantity
AA Anchor Screw 36II200-AA 6
BB Wall Anchor 36II200-BB 6
CC Screw 4mm x 8mm (2 Pre-Attached) 36II200-CC 13
EE Screw 6mm x 18mm 36II200-EE 6
FF Washer 36II200-FF 4
Pre-Assembly
HARDWARE INCLUDED
AA BB CC
EE
NOTE:
Hardware not shown to actual size.
PLANNING ASSEMBLY
Before beginning assembly of product, make sure all parts are present. Compare parts with Hardware Included and Package Contents lists.
If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement
parts.
Estimated Assembly Time: 60 Minutes
Phillips Screwdriver
PRODUCT SPECIFICATIONS
Voltage 120 VAC, 60 Hz
Amps 12.5 Amps
Watts 1500 Watts
FF
Tools Required for Assembly (not included): Phillips screwdriver, Drill, Hammer, Level
LevelDrill Hammer

7
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
PACKAGE CONTENTS
Pre-Assembly (continued)
A BC
DEFG
HI
JKLM
Part Description Quantity
A Mounting Bracket (Pre-Attached) 1
B Fireplace 1
C Front Frame 1
D Base Bracket 1
E Base 1
F Lower Air Outlet Bafe 1
G Logset 1
H Glass Bafe 1
I Upper Air Outlet Bafe 1
J Back Air Outlet Bafe 1
K Remote Control 1
L Decorative Rocks Varies
M Fireglass Varies

8
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation
Installation Options
Option 1 Option 2
Wall Hanging....page 9 Pedestal Base....page 13
The replace can be installed with 2 options:
1. Hanging on a wall with provided mounting bracket.
2. Freestanding using the pedestal base.
Follow installation instructions below based on installation preference.

9
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation
Installation - Wall Hanging
Hanging on a wall
Your new electric replace may be installed virtually anywhere in your home. However, when choosing a location be sure to follow the
general instructions included. For best results install out of direct sunlight. Power supply service must be either completed or placed within
the electric replace prior to nishing to avoid reconstruction.
Sides 2 in. / 5 cm
Floor 24 in. / 60 cm
Top 2 in. / 5 cm
Back 0 in. / 0 cm
WARNING: Keep drapery and other furnishings at least 3 ft / 1 m
from the front and sides of the electric replace.
Clearance to combustibles
Min. 5 cm
2 in.
Min. 60 cm
24 in.
Min. 5 cm
2 in.

10
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
3Drilling the Holes
1Removing the Mounting Bracket 2Choosing a Wall Location
Remove the Mounting Bracket (A) from the back of the
Fireplace (B) by removing the two pre-attached Screws
(CC) at the top back of the unit.
Choose a wall location to attach the Mounting
Bracket (A). Position the Mounting Bracket (A)
in the desired location.
Use a level to align the bracket and mark the four holes
with a pencil.
Drill six 7/25 in. (7 mm) holes in the wall.
Insert the Wall Anchors (BB) into the holes using
a hammer.
BB
A
B
CC
A
Operation
Installation - Wall Mounting

11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation
4Attaching the Mounting Bracket
7Hanging the Fireplace
Attach the Mounting Bracket (A) to the wall by fastening
the six Anchor Screws (AA) into the wall anchors.
Hang the Fireplace (B) on the hooks at the bottom of
the Mounting Bracket (A) and push the Fireplace (B)
into the Mounting Bracket (A).
Re-fasten the two screws removed in Step 1.
AA
A
Operation
Installation - Wall Mounting (continued)
A
B
H
I
J
B
H
CC
B
CC
I
CC
J
CC
CC
I
J
I
J
5Attaching Lower Air Outlet Bafe
Attach Glass Bafe (H) to the replace by fastening the
Screws (CC).
6Attaching the Upper and back Air Outlet
Bafe
Attach the upper air outlet(I) and back air outlet(J) to the
replace by fastening the screw (CC).

12
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
8Hanging the Front Frame
Mount the Front Frame (C) to the Fireplace (B) using the mounting hooks to hang the front frame.
9Securing the Front Frame
Secure the top frame hooks with the two retaining
Screws (CC).
Continue to the fuel bed setup instructions (Page 18).
Operation Operation
CC
B
C
Mounting
Hooks
Mounting Hooks
Installation - Wall Mounting (continued)

13
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation
Installation - Pedestal Base
1Fastening the Base Bracket 2Attaching the Small Base Bracket
Use two Screws (CC) to fasten the lower Air Outlet Bafe
(F) to the Base Bracket (D).
Use four Screws (EE) and four Washers (FF) to fasten the
Base (E) to the Base Bracket (D).
CC
D
F
E
DD
EE
CC
D
F
E
EE
FF
B
B
I
H
CC
CC
3Attaching Lower Air Outlet Bafe
Attach Glass Bafe (H) to the replace by fastening the
Screws (CC).
CC
H
4Attaching the Upper Air Outlet Bafe
Attach the upper air outlet(I) to the replace by
fastening the screw (CC).

14
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
6Securing the Top Frame
Mount the Front Frame (C) to the Fireplace (B) using the mounting hooks to hang the front frame.
B
C
CC
Tighten the two Screws (CC).
Continue to the fuel bed setup instructions (Page 15).
Mounting
Hooks
Mounting Hooks
Operation
Installation - Pedestal Base
5Attaching the Base Bracket
Fasten the Base Bracket (D) to the Fireplace (B) with the
provided Screws (EE).
D
B
EE

15
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
2Placing the Fireglass/ Rocks
1Removing the Logset
The replace has the option of using the pre-installed logset, the included decorative rocks, or the included reglass.
Simply remove the logset and replace with the decorative rocks or reglass.
Place the Fireglass (L) or the Rocks (K) as desired.
Operation
Fuel Bed Setup Instructions

16
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation
Operation
The replace can be operated by either the remote control or the control panel.
Control Panel
Display

17
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Press the Uplights button on the remote control to change
the uplight between the four settings: white, blue,
white/blue, auto-cycling and OFF.
Operation
Operation (continued)
Push the Power button to supply power to all
functions of the replace and put the insert in a
standby mode.
Push the Power button again to turn off all functions.
Press the Timer button to cycle through the ten timer
settings (30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H,
7H, 8H and 9H) and the OFF setting.
1
3
2
6
Powering the Fireplace Adjusting the Spectrare Flame
Adjusting the Heater
Setting the Timer
NOTE: To change between °F and °C press and hold the
Heater button on the control panel for 3 seconds.
NOTE: Holding the Power button on the control panel for
10 seconds will disable the heater function.
NOTE: All previous settings are held in memory, so the
next time you power up the replace, the unit will turn on
with the same settings.
There are 5 brightness levels that can be selected and OFF
(00)setting.
Settings F5 - F1 decrease in brightness.
Adjusting the Sidelights
Press the Sidelights button on the remote control to change
the sidelight between the four settings: amber,
blue, blue/amber, auto-cycling and OFF.
Adjusting the Uplights
4
5
To set the thermostat use the Heater button on the control
panel to select the desired temperature.
The thermostat setting range is 62°F - 82°F or 17°C - 27°C
or always ON.
The thermostat is adjustable by 2°F or 1°C increments by
pressing the Up or Down “ “ buttons on the remote
control.

18
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
NOTE: Please operate the remote control at a slow
measured pace. Press the remote control buttons with
an even motion and gentle pressure. Repeatedly pressing
buttons in rapid succession may cause the transmitter to
malfunction.
NOTE: Do not mix old and new batteries. Do not mix
alkaline, standard (carbonzinc), or rechargeable (nicad,
nimh, etc) batteries.
When the remote control stops operating or its range
seems reduced, it is time to replace the battery with
new ones.
On the back end of the remote, press and slide
the battery door open and remove the old batteries.
Insert two AAA batteries, checking that the + and -
sides of the battery match inside the battery
compartment.
Replace the battery compartment door.
The battery may contain hazardous substances that
could endanger the enviroment and human health.
This symbol marked on the battery and/or packaging
indicates that used battery shall not be treated as
municipal waste. Instead it should be left at the
appropriate collection point for recycling.
By correctly disposing used batteries, you prevent
potential negative consequences for the environment
and human health. Recycling used materials also
conserves natural resources.
For more information about collecting and recycling
used batteries, please contact your local municipality,
your waste disposal service or the point of sale where
you purchased this product.
7 8
Replacing the Remote Control Battery Disposing of Used Batteries
9Using the Power Cord Correctly
This heater is for use on 120 volts. The cord has a plug
as shown in the figure.
Connect to properly grounded outlets only.
Do not use a 2 prong adapter. Never use with an
extension cord or relocatable power tap (outlet/
power strip).
NOTE: Batteries should be removed if the product is
to be left unused for a long time.
Operation
Operation (continued)

19
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Care and Cleaning
Clean the metal trim using a soft cloth, slightly dampened with a citrus oil-based product and buff with a soft, clean cloth. DO NOT use
brass polish or household cleaners as these products will damage the metal trim.
Purchase citrus oil-based products at a hardware store.
WARNING:
Make sure the power is turned off before proceeding with repairs. Any electrical repairs or rewiring of this unit should be
carried out by a licensed electrician in accordance with national and local codes. If repairing or replacing any electrical component or wiring,
the original wire routing, color coding and securing locations must be followed. During any service of this appliance, the power to the unit
must be turned off. First turn the main power switch to the OFF position. Then remove the electrical plug from the wall outlet.
WARNING:
Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire,
electrical shock and injury to persons.
WARNING:
Keep electrical cords, drapery, furniture and other combustibles at least 3 ft (0.9 m) from the front of the heater and away from
the sides.
WARNING:
Do not use this replace if any part of it has been under water. Immediately call a qualied service technician to inspect the
replace and replace any part of the electrical system.
WARNING:
Disconnect power before attempting any maintenance or cleaning to reduce the risk of re, electrical shock or personal injury.
FCC/IC Information
Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.

20
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Troubleshooting
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Display shows “ ”. The thermostat sensor is broken
or disconnected.
Unplug the replace, remove the back panel of the replace and check
that the thermostat is plugged into the main circuit board. If this does not
solve the problem contact customer service for a replacement thermostat
sensor.
Display shows “ ”. The thermostat sensor is
broken. Contact customer service for a replacement thermostat sensor.
Display shows “ ”. Manual Reset overheat
protection has triggered.
Inspect the heater and check that the air inlets and outlets are not blocked
as this may cause overheating. Unplug the heater for 30 minutes and allow
it to cool down. Replug, operate, and monitor the heater for signs of
overheating. If the problem persists discontinue use of the heater and
contact customer service.
The heater does not blow warm
air.
The heater is in a cool down
cycle.
This is normal operation and the heater will continue to run for several
minutes before shutting down. Times will vary based on temperatures.
During this time cool air will blow.
There is no power. There is no power to the unit.
Check that unit is plugged into a standard 120V outlet. Press the Power
button several times and make sure the power is set to the “ON” position.
The heater does not blow any
air.
Thermostat setting is preventing
heater from turning on.
Adjust the temperature settings to ensure that the thermostat is set higher
than the current room temperature.
The heater does not work, but
Power and Heater settings are
“ON” and thermostat is set.
Manual reset overheat
protection triggered.
Turn the Power to “OFF” and unplug the unit from the wall outlet for 5
minutes. After 5 minutes plug the unit back into wall outlet, and operate as
normal. If the problem persists contact customer service.
Flame effect works but heater
function does not, and the ame
effect ashes when the Heater
button is pressed.
The heater is disabled. With the power on press and hold the Power button on the control panel
for 10 seconds. Once re-enabled the ame effect will ash multiple times.
The remote control is not
working.
There are no batteries or the
signal is poor.
Change the remote batteries.
Operate remote transmitter at a slow measured pace.
Press the remote control buttons with an even motion
and gentle pressure. Repeatedly pressing buttons in rapid
succession may cause the transmitter to malfunction.
The noise when the heater is on
is louder than normal.
a. The air intakes are dirty or
obstructed.
b. The blower/heater assembly
is defective.
a. Check the air intakes for obstructions or high dust build up.
b. Contact Customer Service for a new Heater/Blower Assembly.
Abnormal noise when the heater
is not on and the ame effect
is on. The spinner motor is defective. Contact Customer Service for a new Spinner Motor.