Home Decorators Collection Cecily HDFP72-44E User manual

THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this fireplace console. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators Collection!
Model # HDFP72-44E
# HDFP72-44AE
OMSID # 308824432
OMSID # 312727371
ASSEMBLY INST UCTIONS
Cecily 72in Media Console Infrared Electric Fireplace
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., ST, Monday-Friday
9 a.m. - 6 p.m., ST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECO ATO S
O

2
Maximum load 22.7 kg / 50 lb
Table of Contents
Table of Contents .................................................................. 2
Safety Information ................................................................ 2
Warranty .............................................................................. 2
Pre-Assembly ....................................................................... 2
Planning Assembly .................................................................. 2
Tools required ......................................................................... 2
Hardware Included .................................................................. 3
Package Contents ................................................................... 4
Assembly.............................................................................. 5
Care and Maintenance ........................................................ 16
Safety Information
Please read and understand these instructions before
assembling and using this console. Save these instructions for
future reference.
MAXIMUM ECOMMENDED WEIGHT LOADS
WA NING: This unit is not intended for use with CRT TVs. Use
only with flat panel TVs and audio/video equipment meeting
recommended size and weight limits. Never use with
larger/heavier than recommended flat panel TVs or equipment. To
avoid instability, place flat panel TV in the centre of the unit; the
base of the television must be able to rest on the supporting
surface of the unit without over-hanging the edges.
Improperly positioned flat panel TVs, or flat panel TVs or other
equipment that exceed recommended size and weight limits
could fall off or break the unit, causing possible serious injury.
Warranty
We are confident that you will be delighted with this purchase. Should this product be defective in workmanship or materials, or fail under
normal use, we will repair or replace it for a period of up to one (1) year from date of purchase.
This warranty gives you specific rights and you may also have other rights which vary from state to state.
Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.
Pre-Assembly
PLANNING ASSEMBLY
Compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not assemble this
product and contact the Customer Service Team at 1-800-986-3460.
TOOLS EQUI ED
Phillips
screwdriver
(not provided)
F
its
up
to
most
208
.3
cm /
82
in
.
flat
panel
TVs
Maximum load 61.2 kg / 135 lb
P
lace
TV
behind
the
stopper

3 HOM D POT.COM/HOM D CORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-Assembly (continued)
HA DWA E INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity Part Description Quantity
AA
Large w
ood dowel
26
+
1
extra
MM
Acrylic stopper
1
BB
Cam
l
ock
28
+
1
extra
NN
Cam
l
ock
c
over
16
+1
extra
CC
Cam
b
olt
28
+
1
extra
OO
Handle
2
DD
Short
flat
head
s
crew
16
+1 extra
PP
B
olt
6
Long
flat
head
s
crew
5
+1 extra
QQ
Knob
2
FF
Short
pan
head screw
16
+
1
extra
RR
Long
pan
head screw
4
+
1
extra
GG
Washer head screw
52
+
2
extra
SS
C
hain
2
HH
M
etal
bracket
2
TT
Small w
ood dowel
4
+
1
extra
II
Shelf
support
16
+1 extra
UU
Glue
1
JJ
P
ivot hinge
2
VV
Touch
-
up
p
en
1
K
K
Magnetic catch
2
WW
Tipping
r
estraint
h
ardware
k
it
2
LL
Rubber bumper
4
+1 extra
XX
M
e
dium
flat
head
s
crew
6
+1 extra
TT
MM
LL
NN
OO
PP
QQ
RR
VV
UU
WW
AA
BB
CC
DD
SS
KK
FF
GG
HH
II
JJ
XX

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Box 1
Part Description Quantity
Fireplace insert
1
Remote control with
battery
1
Box 2 Box 3
Part
Description
Quantity
Part
Description
Quantity
F
Left side panel
1
A
Top
p
anel
1
G
Left partition panel
1
B
Upper fixed shelf
1
H
Right
partition panel
1
C
Lower
fixed shelf
1
I
Right side panel
1
D
B
ase
1
P
Adjustable
s
helf
4
Drop lid door
1
R
D
oor
2
J
Side
back panel
2
K
M
iddle stile
2
L
Fireplace insert
support
1
M
Upper fixed shelf molding
1
N
Middle
upper back panel
1
O
Lower
fixed shelf support
1
Q
Wood door panel
2
S
Middle
lower back panel
1
J
K
LM
O
P
R
Q

5 HOM D POT.COM/HOM D CORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly
1
Screwing the cam bolts
NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully
tighten all bolts. This will make
the assembly easier.
□ Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty
carton to avoid any scratches.
□ Securely screw the cam bolts (CC) into the designated small holes on the top panel (A) and the base (D) using a Phillips
screwdriver.
2
Screwing the cam bolts
□
Securely screw the cam bolts (
CC
) into the designated small holes on the
u
pper
fixed shelf
(
B
)
and
the
partition panel
s
(
G and H
)
using a Phillips screwdriver.
CC
A
D
CC
G
B
H

6
Assembly (continued)
3
Attaching the middle stiles
□ Glue two small wood dowels (TT) into the inner holes of one middle stile (K) and attach it to the left partition panel (G) with three
medium flat head screws (XX).
□ Repeat the same procedure to attach the other middle stile (K) to the right partition panel (H ).
NOTE: Refer to the dowel assembling guide drawings in this step for further clarification on how to properly glue in the wooden dowels. Apply
this method whenever instructed to install wood dowels.
4 Attaching the upper fixed shelf molding
□ Glue two large wood dowels (AA) into the inner holes on the upper fixed shelf molding (M) and attach it to the upper fixed shelf (B)
by engaging four cam locks (BB).
□
NOTE: Refer to cam lock assembling guide drawings in this step for further clarification on how to properly install cam locks. Apply this
method whenever instructed to install cam locks .
AA
AA
BB
B
M
GLUE
X
X
FINAL
1 2 43
G
H
TT
TT
XX
K
XX
K
TT
TT

7 HOM D POT.COM/HOM D CORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
5
Attaching the lower fixed shelf support and the chain
□
Using the
pilot holes
as a guide,
a
ttach
the
lower
fixed shelf
support
(
O
)
to the
lower
fixed shelf
(
C
)
with
f
ive
l
ong
flat
head
s
crew
s
( ).
□ Using the pilot holes as a guide, fasten two chains (SS) to the lower fixed shelf (C) with two short pan head screws (FF).
6
Attaching the magnetic catches
□
Using the pilot holes as a guide, fasten
two
magnetic catch
es
(
KK
) to
the
lower
fixed shelf
(
C
)
with
two
long
pan head screws (
RR
)
in each. Make sure that the magnet faces outward.
KK
RR
C
C
O
EE
C
SS
FF

8
Assembly (continued)
7
Attaching the partition panels
□
Glue
four large wood dowels (AA)
into the inner holes of the
fixed
shel
ves
(
B
and C
)
at both ends
.
□ Align the large holes on right partition panel (H) with the inserted wood dowels (AA) and press them together. Attach the partition
panel (H) in place by engaging four cam locks (BB).
□ Repeat the same procedure to attach the left partition panel (G) at the opposite end.
8 Attaching the base
□
Align and attach
the
base
(D)
to
the
partition panels
(G and H)
with
four
large
wood dowels (
AA
) and
four
cam locks (
BB
)
.
G
H
D
BB
AA
UP
UP
C
B
G
H

9 HOM D POT.COM/HOM D CORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
9
Attaching the side panels
□
Glue
four
large
wood dowels (AA) into the inner
holes on
the
side panels
(
F and I
) and attach
them
to
the
base
(D)
by engaging
four
cam locks (BB).
10
Attaching the top panel
□
Glue
eight
large
wood dowels (
AA
) into the top inner holes on both
side panel
(
F
and
I
)
and partition panel
s
(
G
and
H
)
. Position the
top panel (A) onto the inserted wood dowels (BB) and fasten it in place by engaging eight cam locks (BB).
UP
UP
D
F
I
BB
AA
F
I
G
H
A

10
Assembly (continued)
11
Attaching back panels
□
Flip the assembled unit around at its front edges.
□ Now, go back and securely tighten all the cam locks and screws. Make sure that all the parts are tight and there are no gaps
between the parts. This will help keep the unit square.
□ Pick up the middle upper back panel (N) and align the drilled holes against the long edge with the pilot holes on top back stretcher.
Attach the middle upper back panel (N) in place using the provided washer head screws (GG).
□ Using the pilot holes as a guide. Align and attach two side back panels (J) and middle lower back panel (S) to the back of the
mantel with the provided washer head screws (GG).
12
Installing the adjustable shelves
□
Stand the assembled unit upright.
□ Insert eight shelf supports (II) into the desired holes inside each side compartment. Make sure you place the four shelf supports in
the same level so the shelf is not tilted. Rest the adjustable shelves (P) onto the shelf supports (II). Secure the shelves in place with
the short flat head screws (DD) for extra support.
P
P
P
P
DD
II
II
F
I
G
H
D
I
J
N
J
S
GG

11 HOM D POT.COM/HOM D CORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
13
Attaching the handles
□
Attach one
handle
(
OO
) to the front side of each door
(
R
)
with the
provided
bolt
s
(
PP
).
14
Installing the doors
□
Loosen the screws on the hinge
arms
and
plates pre
-
attached on the side panels (F and I)
.
□ Pick up one side door (R) and attach it to right side panel (I) by engaging both door hinges simultaneously. Please follow the steps
below to combine the door hinges together.
(i) xtend both hinge arms on the side door (R) to open position.
(ii) Insert the “J” hooks beneath the hinge arms into the lugs on mounting plates pre-attached on right side panel (I).
(iii) Press lightly on the end of both hinge arms to engage the catch.
(iv) To remove the hinge arms from the mounting plates, press gently in the release lever on the back of hinge arms.
□ Once assembled, go back and fully tighten all screws.
□ Repeat the same procedure to attach the other door (R) at the opposite side.
□ Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws for a good fit. Refer to
the hinge sticker on the door for adjustment.
2
1
F
I
R
R
I/F
R
1
2
3
RR
x 2
PP
R
OO

12
Assembly (continued)
15
Attaching the rubber bumpers and cam lock covers
□
Stick rubber bumpers (
LL
) at
the outer corners of both doors (
R
)
where they meet the
partition panel
s
(
G
and
H
)
.
□ Plug the cam lock covers (NN) onto the visible cam locks to conceal the cams.
16
Installing the drop lid door
□
I
nsert
two
pivot hinges
(
JJ
) into the holes
on
the
partition panel
s
(
G
and
H
)
.
□ Fit the drop lid door ( ) to the inserted pivot hinges (JJ) making sure the mounting holes overlap the pilot holes on the drop lid
door. Secure the pivot hinges (JJ) to the drop lid door ( ) with four short pan head screws (FF).
C
H
G
E
JJ
G/H
JJ
E
JJ
FF
E
LL LL
NN
R
R
F
I
GH
R

13 HOM D POT.COM/HOM D CORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
17
Fasten two chains to the drop lid door
□
Using the pilot holes as a guide, fasten two
c
hain
s (
SS
)
to
the
d
rop lid
door
(
)
using
two
short
pan head
screws (
FF
).
18
Attaching the knobs
□
Attach
two
knob
s
(
QQ
) to the front side of
the
d
rop lid
door
(
)
with the
provided
bolt
s
(
PP
).
E
E
SS
FF
E
PP
QQ

14
Assembly (continued)
19
Installing fireplace insert and support
□
Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening. DO NOT drag the inser
t
across the lower fixed shelf (C) as it may scratch the unit.
□ Using the pilot holes as a guide, fasten two metal brackets (HH) to fireplace insert support (L) with four short pan head screws
(FF).
□ Using the pilot holes as a guide, attach the fireplace insert support (L) between the partition panels (G and H) with four short pan
head screws (FF).
20
Installing the acrylic stopper
□ Remove the paper backing of acrylic stopper (MM), then properly align the acrylic stopper into the cut-out on the acrylic stopper
template on the front of the top panel (A). Press down on the acrylic stopper to help adhesion.
□ At the back of top panel (A), grip the heads of plastic tacks with pliers, with twisting motion pull tacks loose to remove the acrylic
stopper template.
NOTE: To prevent your TV from tipping, you must install the acrylic TV stopper if you place a flat panel television on the
top panel. Otherwise, skip to next step.
CH
G
L
L
FF
HH
L
L
G/H
FF

15 HOM D POT.COM/HOM D CORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
21
Interchanging door insert panels
□ To change door panels, loosen the screws on the inside of the doors (R) and rotate the clips to remove the insert panel. Replace
with desired panel, then rotate clips to secure the panel within the door frame and tighten screws.
22
Installing the tipping restraint hardware
WA NING: The tipping restraint hardware included is for wooden stud wall construction. It must be attached to a wall stud. Depending
upon your wall construction, different anchor hardware maybe required. Please contact your local hardware store for assistance. Young
children can be seriously injured by tipping furniture. You must install the Tipping Restraint Hardware with the unit to prevent the unit
from tipping, causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a substitute for
proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to add the extra security of earthquake
restraints, they must be purchased and installed separately.
□ With assistance, position the assembled fireplace at the desired location against a wall. In case of uneven floor, floor levelers are
provided at the bottom front of the base. If necessary, adjust the floor levelers by hand to correct tilting and level the doors.
□ Follow the instructions printed on the plastic bag containing the tipping hardware to attach the tip-over restraint to the unit and the
wall.
□ Connect the fireplace to the power transformer. Follow the operating manual for the electric fireplace insert to control your
fireplace.
NOTE: The glass door panels are pre-attached when shipping. You can keep as is or interchange as the desired
configuration.
Q

16
Care and Maintenance
A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping.
To clean and care for your furniture:
□ Use a soft, clean cloth that will not scratch the surface when dusting.
□ Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area.
□ Using solvents of any kind on your furniture may damage the finish.
□ Never use water to clean your furniture as it may cause damage to the finish.
□ Always use coasters under beverage glasses and flowerpots.
□ Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
□ Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the
furniture finish.
□ Stains or marks from crayons or ink markers will be difficult to remove.
□ In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair
your furniture.
□ Check bolts/screws periodically and tighten them if necessary.
CA ING FO WOOD FU NITU E
It is best to keep your furniture in a climate-controlled environment. xtreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your
furniture as it ages.
CLEANING THE FI EPLACE T IM
Clean the metal trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth. DO NOT use brass
polish or household cleaners as these products will damage the metal trim. Citrus oil based products can be obtained at supermarkets or
hardware stores.
WARNING
 Unit must be placed on a level surface or leveled with included hardware (when applicable).
 Do not sit or stand on or allow children to climb, sit or stand on the assembled product.
 For safety reasons, it is imperative that this unit be mounted to the wall or floor.
 Unit can tip over causing severe injury or death.
 Never open more than one drawer at a time.
 Do not exceed the recommended weight limits.
 Before cutting, drilling or hammering into any wall or floor surface, verify the location of electrical, plumbing
and gas lines. Cutting may cause serious injury.

Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., ST, Monday-Friday
9 a.m. - 6 p.m., ST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECO ATO S
Retain this manual for future use.