Home Decorators Collection WSFP60ECHD-22 User manual

THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this fireplace console
We strive to continually create quality products designed to enhance your home Visit us online to see our full line of products available
for your home improvement needs Thank you for choosing Home Decorators Collection!
OMSID # 207000471
Model # WSFP60ECHD-22
ASSEMBLY INSTRUCTIONS
Brookdale 60 in. Media Console with In rared Electric Fireplace
in Natural Beige Dri twood Finish
Questions, problems, missing parts? Be ore returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday
9 a.m. - 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS

2
Table o Contents
Table o Contents ............................................................... 2
Sa ety In ormation .............................................................. 2
Warranty ............................................................................ 2
Pre-Assembly ..................................................................... 2
Planning Assembly ....................................................................2
Tools required ...........................................................................2
Hardware Included ....................................................................3
Package Contents .....................................................................4
Assembly .......................................................................... 5
Care and Maintenance .......................................................16
Sa ety In ormation
Please read and understand these instructions be ore assembling
and using this console. Save these instructions or uture re erence.
MAXIMUM RECOMMENDED WEIGHT LOADS
WARNING:
This unit is not intended or use with CRT TVs. Use only
with lat panel TVs and audio/video equipment meeting
recommended size and weight limits. Never use with larger/heavier
than recommended lat panel TVs or equipment. To avoid instability,
place lat panel TV in the center o the unit; the base o the
television must be able to rest on the supporting sur ace o the
unit without over-hanging the edges. Improperly positioned lat
panel TVs, or lat panel TVs or other equipment that exceed
recommended size and weight limits could all o or break the unit,
causing possible serious injury.
Warranty
We are con ident that you will be delighted with this purchase. Should this product be de ective in workmanship or materials, or ail under normal
use, we will repair or replace it or a period o up to one (1) year rom date o purchase.
This warranty gives you speci ic rights and you may also have other rights which vary rom state to state.
Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.
Pre-Assembly
PLANNING ASSEMBLY
Compare all parts with the Hardware Included and Package Contents list. I any part appears missing or damaged, do not assemble this product
and contact the Customer Service Team at 1-800-986-3460.
TOOLS REQUIRED
Phillips
screwdriver
(not provided)
Maximum load 22 6 kg / 50 lb
P
lace
TV
behind
the
stopper
F
its
up
to
most
1
77
8
cm /
70
in
flat
panel
TVs
M
aximum
load
61
2
kg
/
1
3
5
lb

3 HOMEDEPOT COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Pre-Assembly (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part
Description
Quantity
Part
Description
Quantity
AA
Cam
l
ock
34
+ 1 extra
KK
Rubber bumper
4 + 1 extra
BB
Cam
b
olt
34
+ 1 extra
LL
L
-
shaped metal brace
2
CC
W
oo
d
dowel
42
+
2
extra
MM
Triangle metal plate
2
DD
Long wood s
crew
7
+
1
extra
NN
Floor leveler
2
EE
Medium wood s
crew
12
+ 1 extra
OO
Handle
2
FF
Washer head screw
34
+ 1 extra
PP
Handle
bolt
4
GG
Pan head screw
2
+ 1 extra
QQ
Acrylic stopper
1
HH
Short wood screw
8
+
1
extra
RR
Glue
1
II
Cam
l
ock
c
over
24
+ 1 extra
SS
Touch
-
up
p
en
1
JJ
Shel
pin
8
+ 1 extra
TT
Tipping
r
estraint
h
ardware
k
it
2
AA BB CC DD EE FF GG HH II JJ
KK
MM
LL NN
OO
PP QQ RR SS
TT

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part
Description
Quantity
Part
Description
Quantity
A
Top panel
1
L
Right lower partition panel
1
B
Center shel
1
M
Right lower side panel
1
C
Bottom panel
1
N
Le t
middle
stile
1
D
Upper back panel
1
O
Right
middle
stile
1
E
Bottom back stretcher
1
P
Middle crossbar
1
F
Bottom ront
stretcher
1
Q
Middle crossbar molding
1
G
Le t door
1
R
Upper side panel
2
H
Right door
1
S
Upper partition panel
1
I
Lower back panel
2
T
Adjustable shel
2
J
Le t lower side panel
1
Fireplace insert
1
K
Le t lower partition panel
1
Remote control with battery
1

5 HOMEDEPOT COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly
1
Screwing the cam bolts
NOTE: Do not ully tighten all bolts until you inish assembling all parts. Once assembled, go back and ully tighten all bolts. This will make
the assembly easier.
□Unpack the unit and con irm that you have all the hardware and required parts. Assemble the unit on a carpeted loor or the empty
carton to avoid any scratches.
□Securely screw the cam bolts (BB) into the designated small holes on the top panel (A), the bottom panel (C) and the lower side
panels (J and M) by a Phillips screwdriver.
2
Screwing the cam bolts
□
Securely screw the cam bolts (BB) into the designated small holes on the
cent
er shel
(B) at both sides.
BB
A
CJM
BB
B
B

6
Assembly (continued)
3
Combining the middle crossbar and molding
NOTE
:
The middle crossbar (P) and middle stiles (N and O) are designed to be reversible so that you can choose the same inish as t
he
whole unit or achieve slate surround or the ireplace insert. Re er to the dowel assembling guide drawing in this step or urther
clari ication on how to properly glue in the wooden dowels. Apply this method whenever instructed to install wood dowels.
□Based on the con iguration you pre er, align and attach the middle crossbar (P) to the middle crossbar molding (Q) with two wood
dowels (CC) and our medium wood screws (EE) as shown.
4
Attach
ing the middle crossbar assembly
□
Align and attach the center crossbar
assembly
to the center shel (B)
with
two wood dowels (CC) and three
l
ong wood screws
(
DD
).
EE
P
Q
EE
P
Q
CC
CC
or
B
Q
P
DD
CC
GLUE
XX
FINAL
1 2 43

7 HOMEDEPOT COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly (continued)
5
Attaching the
middle stiles
□
Choose the same c
on iguration as
you ch
ose or
the
middle crossbar (P)
.
F
asten
the
l
e t middle
stile
(
N
) to the le t lower partition
panel (K) with two wood dowels (CC) and three medium wood screws (EE) as shown.
□Repeat the same procedure to combine the right middle stile (O) and right lower partition panel (L) together.
6
Attaching the bottom stretchers
NOTE:
Re er to the cam lock assembling guide drawings in this step or urther clari ication on how to properly install cam locks. Apply this
method whenever instructed to install cam locks .
□Glue three wood dowels (CC) into the inner holes o the bottom ront stretcher (F) and attach it to the ront side o the bottom panel
(C) by engaging our cam locks (AA).
□Repeat the same procedure to attach the bottom back stretcher (E) at the opposite end.
AA
CC
C
F
E
K
L
N
O
CC
CC
EE
EE
K
L
O
N
CC
CC
EE
EE
or

8
Assembly (continued)
7
Attaching the
partition panels to bottom panel
□
Glue our wood dowels (CC) into the
bottom
inner holes o
bo
th partition panels (K and L)
and attach them to the bottom pa
nel (C) with
our long wood screws (DD).
8
Installing the side panels
□
Glue
six
wood dowels (CC) into the inner holes o the bottom panel assembly at both ends.
□Align the large holes on both side panels (J and M) with the inserted wood dowels (CC) and press them together. Attach the side
panels (J and M) in place by engaging six cam locks (AA).
DD
DD
CC
CC
C
F
E
K
L
CC
AA
AA
C
E
F
K
L
J
M
CC

9 HOMEDEPOT COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly (continued)
9
Installing the center shel
□
Glue
eight wood dowels (CC) into the
top
inner holes o
both side panels (J and M) and pa
rtition panels (K and L)
.
□Ask or assistance to position the center shel (B) onto the inserted wood dowels (CC) and attach it in place by engaging eight cam
locks (AA).
10
Attaching the upper side panels and partition panel
□
Glue
ive dowels
(CC) into the inner holes o
both
upper side panels (R) and partition panel (S)
and
attach them to the center shel (B)
by engaging six cam locks (AA).
C
E
F
J
K
L
M
B
CC
AA
B
R
R
S

10
Assembly (continued)
11
Attaching the top panel
□
Glue
ive wood dowels (CC) into the top in
ner holes on
both
upper side panels (R) and partition panel (S). Position the top panel (A)
onto the inserted wood dowels (CC) and asten it in place by engaging six cam locks (AA).
12
Installing the triangle metal plates
□
Using
the pilot ho
les as a guide, asten
two
triangle metal plates (
MM
) at the bottom joints between
the
bottom ront stretcher (
F
) and
side panels (J and M) using our short wood screws (HH) per plate.
HH
MM
C
F
J
M
R
R
S
A
CC
AA

11 HOMEDEPOT COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly (continued)
13
Screwing the loor levelers
□
Screw two
loor levelers (
NN
) into the
installed t
riangle metal plates (
MM
).
14
Securing the middle crossbar molding
□
Flip the assembled unit around at its ront edges.
Insert two medium wood screws (EE)
through the drilled holes on
the
le t and right
stiles (N and O) and securely screw into the middle crossbar molding (Q).
QN
O
EE
EE
MM
MM
NN
NN
C
F
J
M

12
Assembly (continued)
15
Attaching the back panels
□
Pick up the upper back panel (D
) and align the
drilled holes against the upper long edge with the pilot holes on the back stre
tcher o
the top panel (A). Attach the upper back panel (D) in place using the provided washer head screws (FF).
□ Align and attach two lower back panels (I) to the lower side panels (J and M) and partition panels (K and L) with the provided washer
head screws (FF), using the pilot holes as a guide.
16
Installing the doors
□
Stand the assembled unit upright.
□ Pick up the le t door (G) and attach the extended hinge arms to the hinge bases installed on the le t side panel (J). Loosen the bolt on
the back o the hinge base or an easy it. Align and insert the “U” slot on the hinge arm under the bolt head on the back o the hinge
base. Make sure that both door hinges engage and unction properly. Tighten the bolt on the hinge base to lock the hinges in place.
□ Repeat the same procedure to attach the right door (H) at the opposite side.
□ Open and close the doors to make sure they are aligned and shut correctly. I necessary, adjust the screws or a good it. Re er to the
hinge sticker on the door or adjustment.
FF
I
M
R
K
B
C
I
D
1
J
M
G
H
UP
UP

13 HOMEDEPOT COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly (continued)
17
Attaching the handles and rubber bumpers
□
Attach one
handle
(OO)
to the ront side o each door
with the
h
andle bolt
s
(
PP
).
□ Stick the rubber bumpers (KK) at the outer corners o both doors (G and H) as shown.
18
Attaching the adjustable shelves and cam lock covers
□ Open the doors (G and H) and insert our shel pins (JJ) into the desired holes inside each side compartment. Make sure you place the 4
shel pins in the same level so the shel is not tilted. Tilt and rest the adjustable shelves (T) onto the shel pins (JJ).
□ Plug the cam lock covers (II) onto the visible cams locks to conceal the cams.
OO
PP
G
H
G/H
KK KK
JJ
JJ
II
J
KL
M
T
T

14
Assembly (continued)
19
Installing the ireplace insert
□
Li t the ireplace insert
care ully into the back o the assembled mantel and center it in the opening. DO NOT drag the
i
nsert across the
bottom panel (C) as it may scratch the unit.
20
Attaching the L-shaped metal braces
□ Using the pilot holes as a guide, align and attach two L-shaped metal braces (LL) to the bottom panel (C) by screwing one pan head
screw (GG) in each.
GG
LL
C
Electric
Firebox

15 HOMEDEPOT COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly (continued)
21
Attaching the acrylic stopper
□ Remove the paper backing rom the acrylic stopper (QQ). Then properly align the acrylic stopper into the cut-out on the acrylic stopper
template on the ront o the top panel (A). Press down on the acrylic stopper to help adhesion.
□ At the back o the top panel (A), care ully pull out the thumb tacks to remove the acrylic stopper template.
NOTE: You must install the acrylic TV stopper to prevent TV rom tipping when placing your lat panel television on the top panel.
22
Installing the tipping restraint hardware
WARNING: Young children can be seriously injured by tipping furniture You must install the tipping restraint hardware with
the unit to prevent the unit from tipping, causing any accidents or damage The tipping restraints are intended only as a
deterrent, they are not a substitute for proper adult supervision The tipping restraints are not earthquake restraints If you wish
to add the extra security of earthquake restraints, they must be purchased and installed separately
□ With assistance, position the assembled ireplace at the desired location against a wall. In case o uneven loor, loor levelers are
provided at the bottom o the mantel. I necessary, adjust the loor levelers by hand to correct tilting, until the unit is level.
□ Follow the instructions printed on the plastic bag containing the tipping hardware to attach the tip-over restraint to the unit and the wall.
□ Connect the ireplace to the power trans ormer. Follow the operating manual or the electric ireplace insert to control your ireplace.
AA

A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping.
To clean and care or your urniture:
□
Use a so t, clean cloth that will not scratch the sur ace when dusting.
□ Use o urniture polishes is not necessary. Should you choose to use polishes, test irst in an inconspicuous area.
□ Using solvents o any kind on your urniture may damage the inish.
□ Never use water to clean your urniture as it may cause damage to the inish.
□ Always use coasters under beverage glasses and lowerpots.
□ Liquid spills should be removed immediately. Using a so t clean cloth, blot the spill gently. Avoid rubbing.
□ Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the urniture
inish.
□ Stains or marks rom crayons or ink markers will be di icult to remove.
□ In the event that your urniture is stained or otherwise damaged during use, we recommend that you call a pro essional to repair your
urniture.
□ Check bolts/screws periodically and tighten them i necessary.
CARING FOR WOOD FURNITURE
It is best to keep your urniture in a climate-controlled environment. Extreme temperature and humidity changes can cause ading, warping,
shrinking and splitting o wood. It is advised to keep urniture away rom direct sunlight as sun may damage the inish.
Proper care and cleaning at home will extend the li e o your purchase. Following these important and help ul tips will enhance your urniture as it
ages.
CLEANING THE FIREPLACE TRIM
Clean the metal trim using a so t cloth, slightly dampened with citrus oil based product and bu with a clean so t cloth. DO NOT use brass polish
or household cleaners as these products will damage the metal trim. Citrus oil based products can be obtained at supermarkets or hardware
stores.
Questions, problems, missing parts? Be ore returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday
9 a.m. - 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual or uture use.
Care and Maintenance