Home Decorators Collection Tavern Park WSFP54ECHD-23 User manual

THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this fireplace
console. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing Home Decorators Collection!
OMSID # 301538223
Model # WSFP54ECHD-23
ASSEMBLY INSTRUCTIONS
Tavern Park 54 in. Media Console Infrared Electric Firepalce in Brown
Walnut Finish
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday
9 a.m. - 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS

2
Table of Contents
Table of Contents..........................................................2
Safety Information.........................................................2
Warranty.........................................................................2
Pre-Assembly ................................................................2
Planning Assembly.....................................................2
Tools required ............................................................2
Hardware Included.....................................................3
Package Contents......................................................4
Assembly....................................................................... 5
Care and Maintenance................................................ 16
Safety Information
Please read and understand these instructions before
assembling and using this console. Save these
instructions for future reference.
MAXIMUM RECOMMENDED WEIGHT
LOADS
WARNING: This unit is not intended for use with CRT
TVs. Use only with flat panel TVs and audio/video
equipment meeting recommended size and weight
limits. Never use with larger/heavier than recommended
flat panel TVs or equipment. To avoid instability, place
flat panel TV in the center of the unit; the base of the
television must be able to rest on the supporting
surface of the unit without over-hanging the edges.
Improperly positioned flat panel TVs, or flat panel TVs or
other equipment that exceed recommended size and
weight limits could fall off or break the unit, causing
possible serious injury.
Warranty
We are confident that you will be delighted with this purchase. Should this product be defective in workmanship or
materials, or fail under normal use, we will repair or replace it for a period of up to one (1) year from date of purchase.
This warranty gives you specific rights and you may also have other rights which vary from state to state.
Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.
Pre-Assembly
PLANNING ASSEMBLY
Compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not
assemble this product and contact the Customer Service Team at 1-800-986-3460.
TOOLS REQUIRED
Phillips
screwdriver
(not provided)
Maximum load 22.6 kg / 50 lb MAXIMUM LOAD 50 LB (22.7 kg)
Place TV behind the
stopper
Fits up to most 165.1 cm / 65 in. flat panel
TVs
Maximum load 61.2 kg / 135 lb

3 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-Assembly (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part
Description
Quantity
Part
Description
Quantity
AA
Cam lock
35 + 1 extra
KK
Rubber bumper
4 + 1 extra
BB
Cam bolt
35 + 1 extra
LL
L-shaped metal brace
2
CC
Wood dowel
34 + 1 extra
MM
Triangle metal plate
2
DD
Long wood screw
4 + 1 extra
NN
Floor leveler
2
EE
Washer head screw
44 + 2 extra
OO
Handle
4
FF
Pan head screw
2 + 1 extra
PP
Handle bolt
8
GG
Short wood screw
12 + 1 extra
QQ
Acrylic stopper
1
HH
Straight metal plate
2
RR
Glue
1
II
Cam lock cover
22 + 1 extra
SS
Touch-up pen
1
JJ
Shelf pin
8 + 1 extra
TT
Tipping restraint hardware
kit
2
AA MAXIMUM LOAD 50 LB (22.7 kg)
BB MAXIMUM LOAD 50 LB (22.7 kg)
CC MAXIMUM LOAD 50 LB (22.7 kg)
DD MAXIMUM LOAD 50 LB (22.7 kg)
EE MAXIMUM LOAD 50 LB (22.7 kg)
FF MAXIMUM LOAD 50 LB (22.7 kg)
GG MAXIMUM LOAD 50 LB (22.7 kg)
HH MAXIMUM LOAD 50 LB (22.7 kg)
II MAXIMUM LOAD 50 LB (22.7 kg)
JJ MAXIMUM LOAD 50 LB (22.7 kg)
KK MAXIMUM LOAD 50 LB (22.7 kg)
MM MAXIMUM LOAD 50 LB (22.7 kg)
LL MAXIMUM LOAD 50 LB (22.7 kg)
NN MAXIMUM LOAD 50 LB (22.7 kg)
OO MAXIMUM LOAD 50 LB (22.7 kg)
PP MAXIMUM LOAD 50 LB (22.7 kg)
QQ MAXIMUM LOAD 50 LB (22.7 kg)
RR MAXIMUM LOAD 50 LB (22.7 kg)
SS MAXIMUM LOAD 50 LB (22.7 kg)
TT MAXIMUM LOAD 50 LB (22.7 kg)

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part
Description
Quantity
Part
Description
Quantity
A
Top panel
1
J
Left lower partition panel
1
B
Center shelf
1
K
Right lower partition panel
1
C
Bottom panel
1
L
Right lower side panel
1
D
Upper back panel
1
M
Upper side panel
2
E
Bottom back stretcher
1
N
Middle crossbar
1
F
Bottom front stretcher
1
O
Adjustable shelf
2
G
Door
2
P
Upper partition panel
1
H
Lower back panel
2
Fireplace insert
1
I
Left lower side panel
1
Remote control with battery
1
GH
J

5 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly
1
Screwing the cam bolts
NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all
bolts. This will make the assembly easier.
□Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratches.
□Securely screw the cam bolts (BB) into the designated small holes on the top panel (A) and the bottom panel
(C) by a Phillips screwdriver.
2
Screwing the cam bolts
□Securely screw the cam bolts (BB) into the designated small holes on the lower side panels (I and L) at both
sides.
BB
A
C
ILBB

6
Assembly (continued)
3
Screwing the cam bolts
□Securely screw the cam bolts (BB) into the designated small holes on the center shelf (B) at both sides.
4
Attaching the middle crossbar
NOTE: Refer to the cam lock assembling guide drawings in this step for further clarification on how to properly install
cam locks. Applythis method whenever instructedto install cam locks.
□Align and attach the Middle crossbar (N) to the center shelf (B) with two wood dowels (CC) and three cam
locks (AA).
N
B
AA
CC
GLUE
XXFINAL
1 2 43
B
B
BB

7 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
5
Attaching the bottom back stretcher
□Align and attach the bottom back stretcher (E) to the bottom panel (C) with two wood dowels (CC) and three
cam locks (AA).
6
Attaching the bottom front stretcher
□Glue two wood dowels (CC) into the inner holes of the bottom front stretcher (F) and attach it to the front side of
the bottom panel (C) by engaging three cam locks (AA).
C
FRONT
E
AA
CC
C
F
FRONT
AA
CC

8
Assembly (continued)
7
Installing the side panels
□Glue six wood dowels (CC) into the inner holes of the bottom panel assembly at both ends.
□Align the large holes on both side panels (I and L) with the inserted wood dowels (CC) and press them together.
Attach the side panels (I and L) in place by engaging six cam locks (AA).
8
Attaching the partition panels to bottom panel
□Glue four wood dowels (CC) into the bottom inner holes of both partition panels (J and K) and attach them to
the bottom panel (C) with four long wood screws (DD).
C
F
E
L
ICC
AA
AA
DD
CC
DD
CC
C
J
K

9 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
9
Installing the center shelf
□Glue eight wood dowels (CC) into the top inner holes of both side panels (I and L) and partition panels (J and
K).
□Ask for assistance to position the center shelf (B) onto the inserted wood dowels (CC) and attach it in place by
engaging eight cam locks (AA).
10
Attaching the upper side panels and partition panel
□Glue five dowels (CC) into the inner holes of both upper side panels (M) and partition panel (P) and attach
them to the center shelf (B) by engaging six cam locks (AA).
M
B
M
P
CC
AA
J
K
L
I
L
B

10
Assembly (continued)
11
Attaching the top panel
□Glue five wood dowels (CC) into the top inner holes on both upper side panels (M) and partition panel (P).
Position the top panel (A) onto the inserted wood dowels (CC) and fasten it in place by engaging six cam locks
(AA).
12
Installing the triangle metal plates
□Using the pilot holes as a guide, fasten two triangle metal plates (MM) at the bottom joints between the bottom
front stretcher (F) and side panels (I and L) using four short wood screws (GG) per plate.
M
M
P
B
A
CC
AA
C
F
L
I
GG
MM

11 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
13
Screwing the floor levelers
□Screw two floor levelers (NN) into the installed triangle metal plates (MM).
14
Installing the metal plate
□Fasten the middle crossbar (N) to the partition panels (J and K) by attaching two metal plates (HH) at the joints,
using two short wood screws (GG) in each. As shown.
NN
NN
C
F
J
KN
GG
HH

12
Assembly (continued)
15
Attaching the back panels
□Pick up the upper back panel (D) and align the drilled holes against the upper long edge with the pilot holes on
the back stretcher of the top panel (A). Attach the upper back panel (D) in place using the provided washer head
screws (EE).
□Align and attach two lower back panels (H) to the lower side panels (I and L) and partition panels (J and K) with
the provided washer head screws (EE), using the pilot holes as a guide.
16
Attaching the adjustable shelves and cam lock
covers
□Stand the assembled unit upright.
□Insert four shelf pins (JJ) into the desired holes inside each side compartment. Make sure you place the 4 shelf
pins in the same level so the shelf is not tilted. Tilt and rest the adjustable shelves (O) onto the shelf pins (JJ).
□Plug the cam lock covers (II) onto the visible cams locks to conceal the cams.
H
H
EE D
O
O
JJ
JJ
II JK
I
L
A
M
M
P

13 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
17
Installing the doors
□Pick up one door (G) and attach the extended hinge arms to the hinge bases installed on the left side panel (I).
Loosen the bolt on the back of the hinge base for an easy fit. Align and insert the “U” slot on the hinge arm under
the bolt head on the back of the hinge base. Make sure that both door hinges engage and function properly.
Tighten the bolt on the hinge base to lock the hinges in place.
□Repeat the same procedure to attach the other door (G) at the opposite side.
□Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws for a
good fit. Refer to the hinge sticker on the door for adjustment.
18
Attaching the handles and rubber bumpers
□Attach one handle (OO) to the front side of each door with the handle bolts (PP).
□Stick the rubber bumpers (KK) at the outer corners of both doors (G) as shown.
G
G1
I
L
A
KK KK
PP
OO
G
G

14
Assembly (continued)
19
Installing the fireplace insert
□Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening. DO NOT
drag the insert across the bottom panel (C) as it may scratch the unit.
20
Attaching the L-shaped metal
braces
□Using the pilot holes as a guide, align and attach two L-shaped metal braces (LL) to the bottom panel (C) by
screwing one pan head screw (FF) in each.
Electric
Firebox
C
FF
LL

15 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
21
Attaching the acrylic stopper
□Remove the paper backing from the acrylic stopper (QQ). Then properly align the acrylic stopper into the cut-out
on the acrylic stopper template on the front of the top panel (A). Press down on the acrylic stopper to help
adhesion.
□At the back of the top panel (A), carefully pull out the thumb tacks to remove the acrylic stopper template.
NOTE: You must install the acrylic TV stopper to prevent TV from tipping when placing your flat panel
television on the top panel.
22
Installing the tipping restraint hardware
WARNING: Young children can be seriously injured by tipping furniture. You must install the tipping restraint hardware
with the unit to prevent the unit from tipping, causing any accidents or damage. The tipping restraints are intended only
as a deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not earthquake restraints.
If you wish to add the extra security of earthquake restraints, they must be purchased and installed separately.
□With assistance, position the assembled fireplace at the desired location against a wall. In case of uneven floor,
floor levelers are provided at the bottom of the mantel. If necessary, adjust the floor levelers by hand to correct
tilting, until the unit is level.
□Follow the instructions printed on the plastic bag containing the tipping hardware to attach the tip-over restraint to
the unit and the wall.
□Connect the fireplace to the power transformer. Follow the operating manual for the electric fireplace insert to
control your fireplace.
AA

A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping.
To clean and care for your furniture:
□Use a soft, clean cloth that will not scratch the surface when dusting.
□Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area.
□Using solvents of any kind on your furniture may damage the finish.
□Never use water to clean your furniture as it may cause damage to the finish.
□Always use coasters under beverage glasses and flowerpots.
□Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
□Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
□Stains or marks from crayons or ink markers will be difficult to remove.
□In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
□Check bolts/screws periodically and tighten them if necessary.
CARING FOR WOOD FURNITURE
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can
cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun may
damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will
enhance your furniture as it ages.
CLEANING THE FIREPLACE TRIM
Clean the metal trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth. DO
NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products can
be obtained at supermarkets or hardware stores.
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday
9 a.m. - 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.
Care and Maintenance