Home Styles 20 05503 0164 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
20 05503 0164
Hutch
IMPORTANT
Refer to later page(s) of these
instructions for drawer assembly.
Cam Lock Screw
16 pcs. (+1 extra)
Cam Lock
16 pcs. (+2 extra)
Knob
2 pcs.
M4x25
Machine Screw
2 pcs.
B.
Shelf
1 pc.
A.
Top
1 pc.
C.
Side Panel
1 pc.
D.
Side Panel
1 pc.
F.
Divider
1 pc.
G.
Back Panel
1 pc.
H.
Drawer
2 pcs.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
M3x16
Wood Screw
2 pcs. (+1 extra)
M3.5x25
Wood Screw (long)
16 pcs. (+1 extra)
E.
Divider
1 pc.

Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
STEP 1
Place Top (A), Shelf (B) and
Side Panels (C), (D) on
a soft cloth.
Insert Cam Lock Screws into
pre-drilled holes in Top (A),
Shelf (B) and Side Panels (C), (D),
then tighten. (See Figure 1)
A
B
C
D
Figure 1
STEP 2
Attach Dividers (E) and (F) to Shelf (B)
with Cam Locks. (See Figure 2)
F
B
E
Figure 2
Cam Lock Screw
Cam Lock

Assembly Instructions 3/5
STEP 3
Attach Side Panels (C) and (D)
to unit with Cam Locks.
Cam Lock
STEP 5
Slide Back Panel (G) into position.
Insert Wood Screws into
pre-drilled in unit, then tighten.
Wood Screw
C
D
G
STEP 4
Place Top (A) upside down
on a soft cloth.
Attach unit to Top (A)
with Cam Locks.
Cam Lock
A

Part List
Assembly Instructions 4/5
H1.
Drawer Front
2 pcs.
H2.
Drawer Back
2 pcs.
H3.
Drawer Side
2 pcs.
H4.
Drawer Side
2 pcs.
H5.
Drawer Bottom
2 pcs.
Drawer (H)
STEP 7
Slide Drawer Bottom (H5) into groove.
Attach Drawer Back (H2) to unit
with Wood Screws (long).
STEP 6
Attach Drawer Sides (H3) and (H4)
to Drawer Front (H1)
with Wood Screws (long).
H1
H3
H4
Wood Screw (long)
H5
H2
Wood Screw (long)
STEP 8
Attach Knob with Machine Screw.
Knob
Machine Screw

Assembly Instructions 5/5
STEP 9
Turn unit from Step 5 over
to its’ upright position.
Slide Drawers (H) into position. H
H
STEP 10
Place Hutch onto Student Desk.

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319