Home Styles 88 5522 16 User manual

Flat Washer
8 pcs. (+1 extra )
Spring Washer
8 pcs. (+1 extra )
PART LIST
HARDWARE LIST
A.
Top Section
1 pc.
B.
Leg
1 pc.
C.
Leg
1 pc.
D.
Leg
2 pcs.
Key Wrench
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5522 16
Student Desk
E.
Drawer Front
1 pc.
M8x45
Bolt
8 pcs. (+1 extra )
Tools Required For Assembly : Phillips screwdriver
M3x10
Wood Screw
9 pcs. (+1 extra )
M4x32
Machine Screw
4 pcs. (+1 extra )
Pull Handle
2 pcs.

IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to tighten up the Bolts in the future.
* Use a soft cloth between these part and the floor.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Turn the Top Section (A) upside down
and place it on a soft cloth.
Remove the drawer box.
(Figure 1)
STEP 2
Attach Legs (B), (C) and (D)
to Top Section (A) with
Flat Washers,
Spring Washers
and Bolts.
(See Figure 1)
Flat Washer
Spring Washer
Bolt
Key Wrench
Flat Washer
Spring Washer
Bolt
STEP 3
Attach Drawer Front (E) to drawer box
with Wood Screws.
A
C
B
Assembly Instructions 2/3
D
D
E
A

Figure 2
Assembly Instructions 3/3
STEP 4
Attach Pull Handles to drawer
with Machine Screws.
STEP 5
Turn the unit over to its’ upright position.
Slide the drawer into position.
To level the unit, adjust the adjustable levelers on
the bottom of the legs. (See Figure 2)
Note: Unit must be level to work properly.
Machine Screw