Home Styles Barnside 88 5516 01 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Assembly Instructions
88 5516 01
Barnside
Mobile File
Wood Screw
for Caster
16 Pcs. (+2 extra)
Caster
4 Pcs.
Tools required for assembly : Phillips screwdriver
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
Figure 1
STEP 1
Place unit on its’ back, with the
drawers facing up, on a soft cloth.
Attach the Caster (4X)
underneath the unit with
Wood Screws.
(see Figures 1) Wood Screw
Caster

Assembly Instructions 2
STEP 2
Remove the Pull Handles
that are installed on the
inside of the drawers
and re-install them on
the outside of the drawers.
(see Figure 2)
Slide drawers into position.
STEP 3
Remove the tape holding
the Metal Strips in place.
You can adjust the Metal Strip for
letter size or legal size file
as shown.
Note:
If both drawers are fully loaded and opened at the same time the unit may tip forward.
Do not open both drawers at the same time.
Figure 2
/2
Legal Size
Letter Size