Home Styles 88 5411 80 User manual

88 5411 80
Dining Chair
Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Part List
IMPORTANT NOTE.
Tools required for assembly : Phillips screwdriver
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
Head Cap Bolt
8 Pcs. (+1 extra)
Spring Washer
8 Pcs. (+1 extra)
Flat Washer
8 Pcs. (+1 extra)
Wood Screw
4 Pcs. (+1 extra)
E.
Back Frame
1 Pc.
A.
Seat
1 Pc.
D.
Stretcher
2 Pcs.
B.
Leg
1 Pc.
C.
Leg
1 Pc.

Assembly Instructions 2/2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten all the Head Cap Bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
STEP 2
with Wood Screws.
Attach Back Frame (E) to unit with
Head Cap Bolts, Spring Washers
and Flat Washers, tightening the bolts
STEP 1
Attach Stretchers (D) to Leg (B) with
Head Cap Bolts, Spring Washers and
Flat Washers, tightening the bolts only half way.
Attach Leg (C) to unit with Head Cap Bolts,
Spring Washers and Flat Washers,
B
B
B
D
B
D
A
B
C
E
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt
(See Figure 1)
tightening the bolts only half way.
Turn the unit over to its’ upright position.
Tighten all Head Cap Bolts.
Figure 1
Attach Seat (A) to unit
only half way.