Home Styles 20 09001 007C User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M6x35
Head Cap Bolt
12 pcs. (+1 extra)
M6x30
Head Cap Bolt
For Top
4 pcs. (+1 extra)
M6x25
Head Cap Bolt
for Tower Bar
2 pcs. (+1 extra)
M4x16
Wood Screw
for Caster
16 pcs. (+1 extra)
Adjustable Pin
4 pcs. (+1 extra)
Wood Plug
8 pcs. (+1 extra)
M3.5x13
Wood Screw
(Short)
6 pcs. (+1 extra)
M3.5x25
Wood Screw (long)
8 pcs. (+1 extra)
Handle
1 pc.
Caster
2 Locking
2 Non-Locking
4 pcs.
20 09001 007C
Cuisine Cart
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Refer to later page(s) of these
instructions for drawer assembly.
F.
Back Rail
1 pc.
D.
Back Upright
1 pc.
E.
Back Panel
2 pcs.
J.
Pipe
3 pcs.
H.
Rack Side
1 pc.
A.
Side Panel
1 pc.
B.
Side Panel
1 pc.
N.
Door
1 pc.
P.
Drawer
1 pc.
L.
Tower Bar
1 pc.
C.
Base
1 pc. G.
Front Rail
1 pc.
I.
Rack Side
1 pc.
M.
Shelf
1 pc.
O.
Door
1 pc.
K.
Rack Base
1 pc.
20 09001 Top carton is also needed for assembly.
M4x20
Machine Screw
4 pcs.
Knob
2 pcs.

IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
F
A
B
G
E
E
D
C
STEP 2
Attach Front Rail (G) to unit
with Head Cap Bolt.
Attach Side Panel (B) to unit
with Head Cap Bolts.
Assembly Instructions 2/5
STEP 1
Attach Side Panel (A) to Base (C) with
Head Cap Bolts. (See Figure 1)
Attach Back Upright (D) to
Base (C).
Slide Back Panels (E) into position.
Attach Back Rail (F) to unit
with Head Cap Bolt.
Head Cap Bolt
Head Cap Bolt

Assembly Instructions 3/5
Figure 4
STEP 3
Turn unit upside down.
Attach Casters to unit with Wood Screws for Caster
into pre-drilled holes, with Locking Casters at front.
(See Figure 2)
Note: Arrow label indicates front of unit.
STEP 4
Turn unit over to its
upright position.
Attach Rack Side (I) to unit
with Head Cap Bolts.
(See Figure 3)
Slide Rack Base (K) and
Pipes (J) into Rack Side (I).
Attach Rack Side (H) to unit
with Head Cap Bolts.
Attach Towel Bar (L) to unit
with Head Cap Bolts
for Towel Bar. (See Figure 4)
H
L
J
Figure 2 Figure 3
K
I
Head Cap Bolt
Arrow label at front
Head Cap Bolt for Towel Bar
Locking Caster
Non-Locking Caster
Head Cap Bolt for Towel Bar
Head Cap Bolt
Wood Screw for Caster

Part List
Assembly Instructions 4/5
P2.
Drawer Back
1 pc.
P3.
Drawer Side
1 pc.
P4.
Drawer Side
1 pc.
P5.
Drawer Bottom
1 pc.
Roller at back
Handle
STEP 7
Attach Handle with Machine Screws.
STEP 6
Slide Drawer Bottom (P5) into groove.
Attach Drawer Bottom (P5) to
unit with Wood Screws (short).
Drawer (P)
STEP 5
Attach Drawer Front (P1) and Drawer
Back (P2) to Drawer Side (P3) with
Wood Screws (long).
Attach Drawer Side (P4) to unit with
Wood Screws (long).
Bottom
Wood Screw (long)
Wood Screw (short)
Machine Screw
P1
P4
P2
P3
P5
Bottom
P1.
Drawer Front
1 pc.
Bottom

Assembly Instructions 5/5
N
Q
P
O
M
Figure 6
STEP 9
Cover all holes with Wood Plugs.
Figure 5
Head Cap Bolt for Top
Wood Plug
Knob
Machine Screw
Adjustable Pin
STEP 8
Insert Adjustable Pins into
side panels at desired level.
Place Shelf (M) into position.
Attach Doors (N) and (O) by sliding
door hinges into side panel hinges.
(See Figure 5)
Attach Knobs to Doors (N) and (O)
with Machine Screws.
(See Figure 6)
Attach Top (Q) to unit with
Head Cap Bolts for Top.
Slide Drawer (P) into position.

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319