Home Styles Lafayette 88553709 User manual

Cam Lock
22 pcs.(+1 extra)
Cam Lock Screw
22 pcs.(+1 extra)
Adjustable Pin
12 pcs.(+1 extra)
Pull Handle
2 pcs.
Machine Screw
2 pcs.
Nail
2 pcs.(+1 extra)
Head Cap Bolt
8 pcs. (+1extra)
Hex Wrench
1 pc.
Steel Plate
for Pull Handle
Attachment
1 pc.
Part List
Hardware List
E.
Base
1 pc.
M.
Shelf
2 pcs.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
Casual Attire For Today's Home
G.
Plinth
1 pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
88 5537 09
Entertainment Stand
The Lafayette
Magnet
2 pcs.
Wood Screw
for Magnet
4 pcs.(+1 extra)
B.
Side Panel
.1 pc
C.
Side Panel
1 pc.
D1.
Middle Panel
.1 pc
D2.
Middle Panel
.1 pc
H.
Back Panel
2 pcs.
I.
Back Panel
1 pc.
J.
Door
1 pc.
K.
Door
1 pc.
L.
Shelf
1 pc.
N.
Leg
4 pcs.
Small
Hex Wrench
1 pc.
F.
Front Rail
1 pc.

STEP 1
Assembly Instructions 2/5
G
A
B
E
C
Cam Lock Screw
Attach 2X Magnets to Front Rail (F)
by using Wood Screws (see Figure 1).
Insert Cam Lock Screws
into the pre-drilled holes
of Top (A),then attach Front Rail (F) to Top (A) with
Cam Locks (see Figure 2).
Base (E), Plinth (G).
Insert Cam Lock Screws into the pre-drilled holes
of Side Panel (B) and (C),
Magnet
Figure 2
IMPORTANT
Do not tighten up all the screws until each part is properly
assembled.
You should keep Hex Wrench in a safe place
as you may need to tighten up the
Head Cap Bolts in the future. F
Figure 1

D1
D2
E
STEP 3
Assembly Instructions 3/4
Cam Lock
Screw
Cam Lock
Cam Lock Screw
Cam Lock
STEP 2
Attach Middle Panel (D1)
and (D2) onto Base (E)
with Cam Locks
(see Figure 2).
Head Cap Bolt
Figure 3
Head Cap Bolt
Attach Plinth (G) to the unit with Cam Locks, then attach
Side Panel (B) and (C) to the unit with Cam Locks.
Attach Legs (N) to the unit
with Head Cap Bolts (see Figure 3).
C
N
N
N
N
B
G
Figure 2

Assembly Instructions 4/4
STEP 4
K
J
HI
H
Figure 4
Figure 5
Nail
Steel Plate
A
M
M
L
Adjustable Pin
Cam Lock
Place Top (A) onto the unit, using Cam Locks.
Insert Adjustable Pins into side panels and middle panels at the desired level.
Place Shelves (L) and (M) into position.
STEP 5
Slide Back Panels (H) and (I) into place.
Assemble Pull Handles to Doors (J) and (K) with Machine Screws.
Use the Steel Plate to firmly push the nail through the hole in the Pull Handle and into the
pre-drilled hole in the door (see Figure 4).
Attach Doors (J) and (K) by sliding the door lift hinges into the side panels lift hinges
(see Figure 5).