Home Styles 88 5050 48 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5050 48
Hall Tree Stand
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
M6x16
Head Cap Bolt (short)
15 Pcs.(+1 extra)
M6x57
Head Cap Bolt (long)
2 Pcs.(+1 extra)
M6x32
Head Cap Bolt
for Seat
2 Pcs.(+1 extra)
M6x16
Tapered Head Cap Bolt
12 Pcs.(+1 extra)
Flat Washer
19 Pcs. (+1 extra)
Spring Washer
19 Pcs. (+1 extra)
M4x13
Wood Screw
12 Pcs. (+1 extra)
Hook
4 Pcs.
M3x13
Wood Screw
for Hook
8 Pcs. (+1 extra)
A.
Top
1 Pc.
B.
Shelf
1 Pc.
C.
Seat
1 Pc.
D.
Shelf
1 Pc.
E.
Side Frame
1 Pc.
F.
Side Frame
1 Pc.
G.
Side Frame
1 Pc.
H.
Side Frame
1 Pc.
J.
Back Frame
1 Pc.
K.
Back Frame
1 Pc.
M.
Back Stretcher
1 Pc.
L.
Back Frame
1 Pc.
I.
Front Stretcher
2 Pcs.

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the head cap bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
*After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Attach Shelf (D) and Back Stretcher
(M) to Side Frame (G) with Flat
Washers, Spring Washers and
Head Cap Bolts (short).
(See Figure 1)
Attach Front Stretcher (I) to
Side Frame (G) with
Tapered Head Cap Bolts.
(See Figure 2)
Attach Side Frame (H) to unit with
Flat Washers, Spring Washers,
Head Cap Bolts (short) and
Tapered Head Cap Bolts.
STEP 2
Place Seat (C) on a soft cloth.
Attach Seat (C) to unit with
Flat Washers, Spring Washers,
Head Cap Bolts for Seat and
Wood Screws.
G
H
D
M
I
C
Figure 1 Figure 2
/4
Tapered Head Cap Bolt
Head Cap Bolt (short)
Head Cap Bolt
for Seat
Wood Screw
Flat Washer
Flat Washer
Spring Washer
Spring Washer

Assembly Instructions 3
STEP 3
Attach Back Frame (K) to
Back Frame (L) with Flat Washer,
Spring Washer and Head Cap Bolt (short).
STEP 4
Attach Hooks to Back Frame (J)
with Wood Screws for Hook into
the pre-drilled holes.
(See Figure 3)
Attach Back Frame (J) to unit from
Step 3 with Tapered Head Cap Bolts.
STEP 5
Attach Side Frame (E) to unit with
Flat Washers, Spring Washers and
Head Cap Bolts (short).
Attach Front Stretcher (I) to
Side Frame (E) with
Tapered Head Cap Bolts.
Attach Side Frame (F) to unit with
Flat Washers, Spring Washers,
Head Cap Bolts (short) and
Tapered Head Cap Bolts.
Head Cap Bolt (short)
Head Cap Bolt (short)
Flat Washer
Flat Washer
Spring Washer
Spring Washer
K
L
J
E
FI
Tapered Head Cap Bolt
Tapered Head Cap Bolt
Wood Screw for Hook
Hook
/4
Figure 3

Assembly Instructions 4
Figure 4
STEP 6
Attach Top (A) and Shelf (B)
to unit with Wood Screws.
STEP 7
Turn base unit to its’ upright position.
Attach top unit to base unit with Flat Washers,
Spring Washers and Head Cap Bolts (long).
To level the unit, adjust the adjustable levelers
on the legs of unit.
(See Figure 4)
A
B
Wood Screw
Head Cap Bolt (long)
Flat Washer
Spring Washer
/4