Home Styles 20 05186 0076 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
IMPORTANT
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
D.
Shelf
1 pc.
J.
Shelf
2 pcs.
E.
Base
1 pc.
I.
Back Upright
2 pcs.
F.
Rail
2 pcs.
Cam Lock Screw
8 pcs. (+1 extra)
Adjustable Pin
8 pcs. (+1 extra)
Cam Lock
8 pcs. (+2 extra)
M6x25
Head Cap Bolt
12 pcs. (+1 extra)
20 05186 0076
Bookcase
C.
Side Panel
1 pc.
G.
Rail
1 pc.
H.
Back Panel
4 pcs.
A.
Top
1 pc.
B.
Side Panel
1 pc.

Assembly Instructions 2/5
Figure 1
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Side Panels (B) and (C),
then tighten. (See Figure 1)
Cam Lock Screw
Head Cap Bolt
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
B
C
B
D
E
STEP 2
Attach Shelf (D) and Base (E) to Side Panel (B)
with Head Cap Bolts. (See Figure 2)
Figure 2

Assembly Instructions 3/5
STEP 3
Attach Rails (F) and (G) to unit
with Cam Locks. (See Figure 3)
STEP 4
Slide Back Panels (H) into position.
Slide Back Uprights (I) into position.
Slide Back Panels (H) into position.
Cam Lock
Figure 3
F
F
G
H
H
H
H
I
I

Assembly Instructions 4/5
STEP 5
Attach Side Panel (C) to unit
with Cam Locks and Head Cap Bolts.
STEP 6
Turn unit to its upright position.
Attach Top (A) to unit with Head Cap Bolts.
Insert Adjustable Pins into side panels
at desired level.
Place Shelves (J) into position.
Level unit by adjusting the adjustable
levelers on bottom of unit. (See Figure 4)
Note: Unit must be level to work property.
Cam Lock
Head Cap Bolt
Head Cap Bolt
Adjustable Pin
C
J
J
Figure 4
A

Assembly Instructions 5/5
Hardware List
IMPORTANT
To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly.
Anchor
1 pc. (+1 extra)
Bracket
2 pcs. (+1 extra)
Tipover Restraint
1 pc. (+1 extra)
M3.5x40
Wall Screw
1 pc. (+1 extra)
M3.5x16
Wood Screw
1 pc. (+1 extra)
STEP 7
Place unit at desired location.
Drill a 3/8” hole in wall in-line with
pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
Slide Tipover Restraint through
Bracket on wall and Bracket on unit.
(See Figure 5)
Put tie end of Tipover Restraint into lock
end of Tipover Restraint and pull until tight.
Bracket
on wall
Anchor in wall
3/8” wall hole
Tie end
Lock end
Bracket at
top of unit
Tipover
Restraint
Figure 5
Wood Screw
Wall Screw Pre-drilled hole
at top of unit
Drill 3/8” hole in wall
Top of unit

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319