Home Styles 5003-941 User manual

Part List
500 9413-
Kitchen Island
IMPORTANT
For assembly see instructions in carton 500 943.3-
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
A.
Top Unit
1 pc.
B.
Leaf Top
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460

Part List
500 9423-
Hardware List
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
For assembly see instructions in carton 500 943.3-
D.
Back Upright
1 pc.
E.
Middle Panel
1 pc.
H.
Base
1 pc.
Small Hex Wrench
1 pc.
Cam Lock Screw
4 pcs. (+1 extra)
Cam Lock
4 pcs. (+2 extra)
Adjustable Pin
32 pcs. (+1 extra)
M6x35
Head Cap Bolt
18 pcs. (+1 extra)
Knob
4 pcs.
M4x25
Machine Screw
4 pcs.
M3.5x16
Wood Screw
9 pcs. (+1 extra)
N.
Back Panel
2 pcs.
Kitchen Island
G.
Shelf
4 pcs.
C.
Back Rail
2 pcs.
F.
Rail
2 pcs.
Hex Wrench
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460

Part List
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Cartons 5003-941, 5003-942 are also needed for assembly.
Tool(s) required for assembly: LevelPhillips screwdriver,
J.
Post
1 pc.
I.
Post
1 pc.
K.
Post
1 pc.
L.
Post
1 pc.
M.
Side Panel
2 pcs.
O.
Shelf
4 pcs.
P.
Door
1 pc.
Q.
Door
1 pc.
500 9433-
Kitchen Island
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460

N
D
K
L
Assembly Instructions 2/6
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Posts (K) and (L),
then tighten. (See Figure 1)
Cam Lock Screw
KL
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 2
STEP 2
Attach Back Rail (C) to Post (K)
with Cam Lock. (See Figure 2)
Attach Back Upright (D) to
Back Rail (C).
Slide Back Panels (N) into position.
Attach Back Rail (C) to unit with Cam Lock.
Attach Post (L) to unit with Cam Locks.
C
C
N
Cam Lock
Figure 1

Assembly Instructions 3/6
STEP 3
Attach unit and Middle Panel (E)
to Base (H) with Head Cap Bolts.
(See Figure 3)
Figure 3
STEP 4
Attach Posts (I) and (J) to unit with
Head Cap Bolts.
Slide Side Panels (M) into position.
I
J
M
M
Head Cap Bolt
Head Cap Bolt
E
H

Figure 4 Figure 5
P
Q
Knob
Machine Screw
Assembly Instructions 4/6
STEP 6
Attach Doors (P) and (Q) to
unit by sliding door hinges
into post hinges.
(See Figure 5)
Attach Knobs to Doors (P) and
(Q) with Machine Screws.
(See Figure 6)
F
F
Head Cap Bolt
G
Adjustable Pin
O
Figure 6
STEP 5
Attach Rails (F) to unit
with Head Cap Bolts.
Insert Adjustable Pins
into posts and
middle panel at
desired level.
(See Figure 4)
Place Shelves (G)
and (O) into position.
O
OO
O
G
G
G

A
Machine Screw
Knob
Assembly Instructions 5/6
STEP 9
Place Top Unit (A) and Leaf Top (B)
upside down on a soft cloth.
Attach Top Unit (A) to Leaf Top (B)
with Wood Screws into
pre-drilled holes. (See Figure 7)
Wood Screw
A
B
Figure 7
STEP 8
Attach Knobs to drawers with Machine Screws.
STEP 7
Remove drawers from Top Unit (A).

Assembly Instructions 6/6
STEP 11
Slide drawers into position.
Level unit by adjusting the
adjustable levelers on bottom of unit.
(See Figure 8)
Note: Unit must be level to work properly.
STEP 10
Attach top unit to unit with
Head Cap Bolts.
Figure 8
Head Cap Bolt

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460