Home Styles Pantry 5180-64 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Hardware List
Pantry
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
M6x35
Head Cap Bolt
4 Pcs.(+1 extra)
Flat Washer
4 Pcs. (+1 extra)
M4x15
Machine Screw
8 Pcs.
Knob
4 Pcs.
Spring Washer
4 Pcs. (+1 extra)
Cam Lock Screw
28 Pcs. (+1 extra)
Lock Screw
28 Pcs. (+1 extra)
M3.5x16
Wood Screw
for Back Panel
16 Pcs. (+1 extra)
Adjustable Pin
16 Pcs. (+1 extra)
A.
Top
1 Pc.
B.
Front Stretcher
1 Pc.
C.
Shelf
4 Pcs.
D.
Bottom
1 Pc.
N.
Top
1 Pc.
O.
Front Stretcher
1 Pc.
E.
Side Panel
1 Pc.
P.
Side Panel
1 Pc.
F.
Side Panel
1 Pc.
G.
Door
1 Pc.
R.
Door
1 Pc.
K.
Leg Frame
1 Pc.
L.
Leg Frame
1 Pc.
I.
Back Panel
2 Pcs.
T.
Back Panel
2 Pcs.
J.
Back Upright
1 Pc.
U.
Back Upright
1 Pc.
M.
Back Stretcher
4 Pcs.
H.
Door
1 Pc.
S.
Door
1 Pc.
Q.
Side Panel
1 Pc.

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the head cap bolts and screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
*After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Insert Cam Lock Screws into the pre-drilled holes of Top (A), (N), Bottom (D)
and Side Panel (E), (F), (P), (Q).
(See Figure 1)
AD
E
N
P
Q
F
Figure 1
/5
Cam Lock Screw

Assembly Instructions 3/5
STEP 2
Attach Back Stretcher (M) to
Side Panel (F) with Cam Lock.
Attach Back Upright (J) to Back
Stretcher (M).
Slide Back Panels (I) to the unit.
Attach Back Stretcher (M) to unit
with Cam Lock.
Attach Front Stretcher (B) to unit
with Cam Lock.
Attach Side Panel (E) to the unit
with Cam Locks.
(See Figure 2)
E
B
K
L
D
A
M
M
J
I
IF
Cam Lock
Cam Lock
Head Cap Bolt
Spring Washer
Flat Washer
STEP 3
Attach Leg Frames (K), (L) to the Bottom (D) with
Flat Washers, Spring Washers and
Head Cap Bolts. (See Figure 3)
STEP 4
Attach unit from Step 2 to unit from Step 3 with
Cam Locks.
Place Top (A) onto unit with Cam Locks.
Figure 2
Figure 3

Assembly Instructions 4/5
M
M
O
P
T
N
T
UQ
STEP 5
Attach Back Stretcher (M) to Side Panel (Q) with Cam Lock. Attach Back Upright (U) to
Back Stretcher (M). Slide Back Panels (T) to the unit. Attach Back Stretcher (M) to unit with
Cam Lock. Attach Front Stretcher (O) to unit with Cam Lock. Attach Side Panel (P) to the unit
with Cam Locks.
Cam Lock
Cam Lock
Cam Lock
STEP 6
Place Top (N) onto the unit with Cam Locks.
STEP 7
Attach unit from Step 6 to unit from Step 4 with Cam Locks.

Assembly Instructions 5/5
STEP 8
Insert Adjustable Pins into side panels at desired location.
Place Shelves (C) into position.
Attach Doors (G), (H), (R) and (S) to the side panels by
sliding the door lift hinges into the side panel lift hinges.
(See Figure 4)
Attach Pull Handles to Door (G), (H), (R) and (S) with
Machine Screws.
(See Figure 5)
RS
C
C
C
C
G
H
Figure 4 Figure 5 Figure 6
Figure 7
STEP 9
Level the unit by adjusting the adjustable levelers on the
bottom of unit. (See Figure 7)
Insert Wood Screws for Back Panel into the pre-drilled
holes in the back panel.
Adjustable Pin
Note : Please make sure unit is level before
tightening these screws.