Home Styles 20 05186 0001 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
20 05186 0001
File Cart
B.
Side Panel
1 pc.
Refer to later page(s) of these
instructions for drawer assembly.
Handle
1 pc.
Machine Screw
2 pcs.
M4x22
M3x14
Wood Screw (short)
16 pcs. (+1 extra)
M3x38
Wood Screw
2 pcs. (+1 extra)
A.
Top
1 pc.
Cam Lock Screw
12 pcs. (+1 extra)
Cam Lock
12 pcs. (+2 extra)
Caster
2 Locking
2 Non-Locking
4 pcs.
E.
Base
1 pc.
G.
Drawer
1 pc.
H.
Metal Strip
2 pcs.
F.
Panel
1 pc.
D.
Back Panel
1 pc.
C.
Side Panel
1 pc.

Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the screws until each part is properly assembled.
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Top (A), Side Panels (B), (C) and Back Panel (D),
then tighten. (See Figure 1)
STEP 2
Place Base (E) upside down on a soft cloth.
Attach Casters to unit with Wood Screws (short) into
pre-drilled holes, with Locking Casters at front. (See Figure 2)
Figure 1
Figure 2
A
B
C
D
Cam Lock Screw
E
Wood Screw (short)
Non-Locking Caster
Locking Caster

Assembly Instructions 3/5
Cam Lock
Wood Screw
STEP 4
Turn unit to its upright position.
Attach Panel (F) to unit with Wood Screws.
(See Figure 4)
STEP 3
Attach Base (E) to Back Panel (D) with Cam Lock. (See Figure 3)
Attach Side Panels (B) and (C) to unit with Cam Locks.
Figure 3
Figure 4
B
C
D
E
F

Assembly Instructions 4/5
Drawer (G)
G2.
Drawer Back
1 pc.
G4.
Drawer Side
1 pc.
G5.
Drawer Bottom
1 pc.
G2
G3
G4
STEP 6
Slide Drawer Bottom (G5) into groove.
Attach Drawer Front (G1) to unit, then flip Locks.
Part List
STEP 7
Attach Handle with Machine Screws.
G3.
Drawer Side
1 pc.
G5
Machine Screw
Handle
STEP 5
Attach Drawer Sides (G3) and (G4) to
Drawer Back (G2), then flip Locks.
(See Figures 5 and 6)
Figure 6Figure 5
Lock
Lock
G1
G1.
Drawer Front
1 pc.

Assembly Instructions 5/5
H
H
Legal Size
Letter Size
STEP 8
Place Metal Strips (H) into position.
Metal Strips (H) can be adjusted
for letter or legal files.
STEP 9
Attach Top (A) to unit with Cam Locks.
Slide Drawer (G) into position.
Note: To remove Drawers (G) in future, push plastic lever on left side up, push plastic lever on
right side down and pull open. (See Figures 7 and 8)
A
G
Figure 8
Figure 7
Left Side
Right Side
Cam Lock

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319