Home Styles 88 5569 53 User manual

88 5569 53
Swivel Chair with Cushion
Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Part List
IMPORTANT NOTE
This product is made of sturdy, high quality aluminum
and will provide years of enjoyment. Do not use power tools
to assemble and only tighten bolts until they are snug.
Over tightening can cause damage to the aluminum.
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this product and
request that you carefully and strictly follow our assembly
instructions to ensure a completed product as it was designed.
A.
Back
1 pc.
Key Wrench
1 pc.
Hex Wrench
1 pc.
M6x30
Head Cap Bolt (long)
4 pcs. (+1 extra)
M6x25
Head Cap Bolt (short)
4 pcs. (+1 extra)
E.
Cushion
1 pc.
D.
Frame
1 pc.
B.
Seat
1 pc.
C.
Frame
1 pc.
F.
Connector
1 pc.
G.
Base
1 pc.
Flat Washer
4 pcs. (+1 extra)
M8x35
Bolt
4 pcs. (+1 extra)
Spring Washer (large)
4 pcs. (+1 extra)
Nut (large)
4 pcs. (+1 extra)
Nut Cap (large)
12 pcs. (+1 extra)
Spring Washer
8 pcs. (+1 extra)
Flat Washer
8 pcs. (+1 extra)

STEP 1
Attach Seat (B) to Connector (F) with Bolts,
Flat Washers, Spring Washers (large), Nuts (large),
and Nut Caps (large).
(See Figure 1)
Place unit onto Base (G).
Assembly Instructions 2/2
B
F
G
Bolt
Nut Cap (large)
Flat Washer
Nut Cap (large)
Nut Cap (large)
Nut (large)
Spring Washer (large)
Head Cap Bolt (long)
Flat Washer
Head Cap Bolt (short)
C
D
A
Figure 3
Figure 2
STEP 2
Attach Frame (C) to unit with
Flat Washers, Spring Washers
and Head Cap Bolts (long).
(See Figure 2)
Attach Back (A) to unit with Flat Washers,
Spring Washers and Head Cap Bolts (short).
(See Figure3)
Attach Frame (D) to unit with Flat Washers,
Spring Washers, Head Cap Bolts (short) and
Head Cap Bolts (long).
STEP 3
Place Cushion (E) onto seat.
Use the tie-downs on Cushion (E) to attach to chair.
Figure 1
Flat Washer
Spring Washer
IMPORTANT
* Please keep Key Wrench and Hex Wrench in a safe place as you may need to tighten up the Nuts in the future.
* Use a soft cloth between these parts and the floor.
* Do not use power tools to assemble and do not over tighten the bolts and nuts.
* Do not tighten up all the bolts and nuts until each part is properly assembled.
E
Spring Washer