Home Styles 20 05507 0432 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
20 05507 0432
Dresser
IMPORTANT
Carton 20 05507 0431 is also needed for assembly.
Spring Washer
32 pc. (+1 extra)
Handle
6 pcs.
M6x40
Head Cap Bolt (long)
8 pcs. (+1 extra)
M3.5x20
Wood Screw (short)
48 pcs. (+1 extra)
M4x30
Machine Screw
12 pcs.
M6x30
Head Cap Bolt
24 pcs. (+1 extra)
Flat Washer
32 pc. (+1 extra)
M4x30
Wood Screw
60 pcs. (+1 extra)
Small Hex Wrench
1 pc.
Hex Wrench
1 pc.
C.
Side Panel
1 pc.
B.
Bottom
1 pc.
D.
Side Panel
1 pc.
E.
Middle Panel
1 pc.
F.
Back Panel
1 pc.
G.
Back Panel
1 pc.
H.
Foot
4 pcs.

Assembly Instructions 2/11
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
C
Flat Washer
Spring Washer
HHead Cap Bolt (long)
B
H
H
H
STEP 1
Place Bottom (B) upside down
on a soft cloth.
Attach Feet (H) to unit
with Flat Washers, Spring Washers
and Head Cap Bolts (long).
(See Figure 1)
STEP 2
Turn unit over to its’ upright position.
Attach Side Panel (C) to unit
with Flat Washers,
Spring Washers,
Head Cap Bolts,
tightening bolts
only halfway.
(See Figure 2)
Figure 2Figure 1
Flat Washer
Spring Washer
Head Cap Bolt

Assembly Instructions 3/11
STEP 4
Attach Side Panel (D)
and Middle Panel (E) to unit
with Flat Washers,
Spring Washers
and Head Cap Bolts,
tightening bolts only halfway.
G
D
F
E
STEP 3
Attach Back Panels (F) and (G)
to unit with Flat Washers,
Spring Washers,
and Head Cap Bolts,
tightening bolts only halfway.
Flat Washer
Spring Washer
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt

Part List
Assembly Instructions 4/11
I1.
Drawer Front
1 pc.
I2.
Drawer Back
1 pc.
I3.
Drawer Side
1 pc.
I4.
Drawer Side
1 pc.
I6.
Support
1 pc.
Drawer (I)
STEP 7
Attach Handle with Machine Screws.
STEP 6
Slide Drawer Bottom (I5) into groove.
Attach Support (I6) to unit
with Wood Screws.
Attach Drawer Bottom (I5) to unit
with Wood Screws (short).
STEP 5
Attach Drawer Front (I1) and
Drawer Back (I2) to Drawer Side (I3)
with Wood Screws.
Attach Drawer Side (I4) to unit
with Wood Screws.
I1
I4
I2
I3
I5
Roller at back
Bottom
Handle
Machine Screw
Wood Screw (short)
I5.
Drawer Bottom
1 pc.
I6
Wood Screw
Wood Screw

Part List
Assembly Instructions 5/11
J1.
Drawer Front
1 pc.
I2.
Drawer Back
1 pc.
I3.
Drawer Side
1 pc.
I4.
Drawer Side
1 pc.
I6.
Support
1 pc.
Drawer (J)
STEP 10
Attach Handle with Machine Screws.
STEP 9
Slide Drawer Bottom (I5) into groove.
Attach Support (I6) to unit
with Wood Screws.
Attach Drawer Bottom (I5) to unit
with Wood Screws (short).
STEP 8
Attach Drawer Front (J1) and
Drawer Back (I2) to Drawer Side (I3)
with Wood Screws.
Attach Drawer Side (I4) to unit
with Wood Screws.
J1
I4
I2
I3
I5
Roller at back
Bottom
Handle
Machine Screw
Wood Screw (short)
I5.
Drawer Bottom
1 pc.
I6
Wood Screw
Wood Screw

Part List
Assembly Instructions 6/11
K1.
Drawer Front
1 pc.
I2.
Drawer Back
1 pc.
I3.
Drawer Side
1 pc.
I4.
Drawer Side
1 pc.
I6.
Support
1 pc.
Drawer (K)
STEP 13
Attach Handle with Machine Screws.
STEP 12
Slide Drawer Bottom (K5) into groove.
Attach Support (I6) to unit
with Wood Screws.
Attach Drawer Bottom (K5) to unit
with Wood Screws (short).
STEP 11
Attach Drawer Front (K1) and
Drawer Back (I2) to Drawer Side (I3)
with Wood Screws.
Attach Drawer Side (I4) to unit
with Wood Screws.
K1
I4
I2
I3
K5
Roller at back
Bottom
Handle
Machine Screw
Wood Screw (short)
K5.
Drawer Bottom
1 pc.
I6
Wood Screw
Wood Screw

Part List
Assembly Instructions 7/11
L1.
Drawer Front
1 pc.
I2.
Drawer Back
1 pc.
I3.
Drawer Side
1 pc.
I4.
Drawer Side
1 pc.
I6.
Support
1 pc.
Drawer (L)
STEP 16
Attach Handle with Machine Screws.
STEP 15
Slide Drawer Bottom (K5) into groove.
Attach Support (I6) to unit
with Wood Screws.
Attach Drawer Bottom (K5) to unit
with Wood Screws (short).
STEP 14
Attach Drawer Front (L1) and
Drawer Back (I2) to Drawer Side (I3)
with Wood Screws.
Attach Drawer Side (I4) to unit
with Wood Screws.
L1
I4
I2
I3
K5
Roller at back
Bottom
Handle
Machine Screw
Wood Screw (short)
K5.
Drawer Bottom
1 pc.
I6
Wood Screw
Wood Screw

Part List
Assembly Instructions 8/11
M1.
Drawer Front
1 pc.
I2.
Drawer Back
1 pc.
I3.
Drawer Side
1 pc.
I4.
Drawer Side
1 pc.
I6.
Support
1 pc.
Drawer (M)
STEP 19
Attach Handle with Machine Screws.
STEP 18
Slide Drawer Bottom (K5) into groove.
Attach Support (I6) to unit
with Wood Screws.
Attach Drawer Bottom (K5) to unit
with Wood Screws (short).
STEP 17
Attach Drawer Front (M1) and
Drawer Back (I2) to Drawer Side (I3)
with Wood Screws.
Attach Drawer Side (I4) to unit
with Wood Screws.
M1
I4
I2
I3
K5
Roller at back
Bottom
Handle
Machine Screw
Wood Screw (short)
K5.
Drawer Bottom
1 pc.
I6
Wood Screw
Wood Screw

Part List
Assembly Instructions 9/11
N1.
Drawer Front
1 pc.
I2.
Drawer Back
1 pc.
I3.
Drawer Side
1 pc.
I4.
Drawer Side
1 pc.
I6.
Support
1 pc.
Drawer (N)
STEP 22
Attach Handle with Machine Screws.
STEP 21
Slide Drawer Bottom (K5) into groove.
Attach Support (I6) to unit
with Wood Screws.
Attach Drawer Bottom (K5) to unit
with Wood Screws (short).
STEP 20
Attach Drawer Front (N1) and
Drawer Back (I2) to Drawer Side (I3)
with Wood Screws.
Attach Drawer Side (I4) to unit
with Wood Screws.
N1
I4
I2
I3
K5
Roller at back
Bottom
Handle
Machine Screw
Wood Screw (short)
K5.
Drawer Bottom
1 pc.
I6
Wood Screw
Wood Screw

Assembly Instructions 10/11
Figure 3
STEP 24
Slide Drawers (I), (J), (K), (L), (M)
and (N) into position.
Level unit by adjusting the
adjustable levelers on
bottom of unit.
(See Figure 3)
Note: Unit must be level to
work properly.
A
N
J
I
L
M
K
STEP 23
Attach Top (A) to unit
with Flat Washers,
Spring Washers
and Head Cap Bolts,
tightening bolts on halfway.
Tighten all bolts used in
Steps 2, 3, 4 and 23.
Flat Washer
Spring Washer
Head Cap Bolt