Home Styles 88 5053 42 User manual

Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Part List
Tools required for assembly : Level
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
IMPORTANT NOTE
88 5053 42
Night Stand
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M6x19
Head Cap Bolt
8 pcs. (+1 extra)
Spring Washer
12 pcs. (+1 extra)
Flat Washer
12 pcs. (+1 extra)
Adjustable Pin
4 pcs.
A.
Top
1 pc.
B.
Shelf
1 pc.
C.
Shelf
1 pc.
D.
Side Frame
2 pcs.
M6x38
Head Cap Bolt (long)
4 pcs. (+1 extra)

Assembly Instructions 2/2
B
STEP 2
Turn the unit to its’ upright position.
Insert Adjustable Pins into side
frame unit at the desired level.
Place Shelf (B) into position.
To level the unit, adjust the
adjustable levelers on the
bottom of unit.
(See Figure 2)
Figure 2
Adjustable Pin
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten all the Head Cap Bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Attach Top A to Side Frame (D) with
Flat Washers, Spring Washers
and Head Cap Bolts (long),
tightening the bolts only half way.
(See Figure 1)
Attach Shelf (C) to unit with
Flat Washers, Spring Washers
and Head Cap Bolts, tightening
the bolts only half way.
Attach Side Frame (D) to unit with
Flat Washers, Spring Washers,
Head Cap Bolts and Head Cap Bolts (long),
tightening the bolts only half way.
Tighten all Head Cap Bolts.
A
C
D
Head Cap Bolt
Spring Washer
Flat Washer
D
Head Cap Bolt (long)
Spring Washer
Flat Washer
Figure 1