Home Styles 20 08001 0932 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Carton 20 08001 0931 is also needed for assembly.
Kitchen Island
20 08001 0932
Refer to later page(s) of these
instructions for drawer assembly.
F.
Shelf
1 pc.
G.
Shelf
4 pcs.
H.
Side Panel
2 pcs.
I.
Side Panel
2 pcs.
J.
Side Panel
2 pcs.
L.
Drawer
1 pc.
Cam Lock Screw
46 pcs. (+2 extra)
Cam Lock
46 pcs. (+6 extra)
Dowel
36 pcs. (+1 extra)
M3.5x64
Wood Screw for Base
12 pcs. (+1 extra)
M3.5x38
Wood Screw
10 pcs. (+1 extra)
M3.5x14
Wood Screw for Hinge
48 pcs. (+1 extra)
Hinge
8 pcs.
Adjustable Pin
20 pcs. (+1 extra)
Cover
16 pcs. (+1 extra)

Assembly Instructions 2/8
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Make sure unit is level before tightening these screws.
The unit must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Top (A), Plinths (C),
and Side Panels (H), (I), (J), then tighten. (See Figure 1) Figure 1
A
C
C
H
H
I
J
I
J
Cam Lock Screw

Assembly Instructions 3/8
STEP 2
Attach Plinths (C) to Plinths (D)
with Cam Locks. (See Figure 2)
Cam Lock
C
C
D
D
Figure 2
Figure 4
Figure 3
STEP 3
Place Base (B) upside down on a soft cloth.
Insert Dowels into pre-drilled holes in
Base (B). (See Figure 3)
Attach unit to Base (B) with Wood Screws
for Base into pre-drilled holes. (See Figure 4)
Wood Screw for Base
Dowel
B

Assembly Instructions 4/8
STEP 4
Insert Dowels into pre-drilled holes in Side Panels (I).
Attach Side Panels (H) to Side Panels (I) with Cam Locks.
Insert Dowels into pre-drilled holes in units.
Attach Side Panels (J) to units with Cam Locks.
STEP 5
Insert Dowels into pre-drilled holes in units.
Attach Shelf (E) to units with Cam Locks.
E
Cam Lock
Dowel
I
J
H
I
J
H
Cam Lock
Dowel

K
K
Figure 5
Assembly Instructions 5/8
STEP 6
Insert Dowels into pre-drilled holes in unit.
Attach unit from Step 3 to unit with
Wood Screws into pre-drilled holes.
Wood Screw
Dowel
Wood Screw
for Hinge
Hinge
K
K
STEP 7
Place Doors (K) face
down on a soft cloth.
Attach Hinges to Doors (K) with Wood
Screws for Hinge into pre-drilled holes,
then tighten. (See Figure 5)

Assembly Instructions 6/8
STEP 8
Turn unit from Step 6 over to its’ upright position.
Attach Doors (K) to unit with Wood Screws for Hinge. (See Figure 6)
Insert Adjustable Pins into side panels at desired level. (See Figure 7)
Place Shelves (F) and (G) into position.
Adjustable Pin
Wood Screw
for Hinge
K
K
KK
Figure 6 Figure 7
F
G
GG
G

Part List
L1.
Drawer Front
2 pcs.
L2.
Drawer Side
2 pcs.
L3.
Drawer Bottom
1 pc.
L4.
Support
1 pc.
Drawer (L)
Assembly Instructions 7/8
L3
L4
STEP 10
Slide Drawer Bottom (L3) into groove.
Attach Support (L4) to unit with Cam Locks.
STEP 9
Insert Cam Lock Screws into pre-drilled
holes in Drawer Front (L1), then tighten.
Attach Drawer Sides (L2) to
Drawer Front (L1) with Cam Locks.
Cover Cam Locks with Covers.
L1
L2
L2
Cam Lock Screw
Cam Lock
Cover
Cam Lock
L1
STEP 11
Insert Cam Lock Screws into pre-drilled
holes in Drawer Front (L1) ,then tighten.
Attach Drawer Front (L1)
to unit with Cam Locks.
Cover Cam Locks with Covers.
Cam Lock Screw
Cam Lock
Cover

Figure 9 Figure 10
UP Front Back
Down
Figure 11
Left
Right
STEP 13
If needed, adjust doors up or down by removing the front Wood Screws for Hinge and
loosening slightly the back Wood Screws for Hinge from side panels, adjusting doors up
or down and re-installing screws. (See Figure 9).
If needed, adjust doors left to right. (See Figure 10)
If needed, adjust doors front to back. (See Figure 11)
Assembly Instructions 8/8
STEP 12
Insert Dowels into pre-drilled holes in unit.
Attach Top (A) to unit with Cam Locks.
Cover Cam Locks with Covers.
Level unit by adjusting the adjustable
levelers on bottom of unit.
(See Figure 8)
Note: Unit must be level
to work properly.
Slide Drawer (L) into position.
A
L
Dowel
Cam Lock
Figure 8
Cover

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319