Home Styles 88 5689 991 User manual

HARDWARE LIST
Hex Wrench
1 pc.
Wood Screw
for Caster
16 pcs. (+2 extra)
PART LIST
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
88 5689 991
Steamer Trunk Bar
A
Head Cap Bolt
(long)
6 pcs. (+1 extra)
Cross Dowel
6 pcs. (+1 extra)
Cam Lock
20 pcs.(+1 extra)
Cam Lock Screw
20 pcs.(+1 extra)
Wood Screw (short)
for Drawer Base Part
8 pcs. (+1 extra)
Wood Screw (long)
for Drawer Side Part
8 pcs. (+1 extra)
Machine Screw
4 pcs.
Tools Required For Assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
E.
Shelf
1 pc.
G.
Shelf
1 pc.
H.
Middle Panel
1 pc.
J.
Back Panel
1 pc.
K.
Back Panel
1 pc.
Caster
4 pcs.
Head Cap Bolt
(short)
4 pcs. (+1 extra)
Door
Pull Handle
4 pcs.
For assembly see instructions in carton 88 5689 992
M.
Door
1 pc.
N.
Door
1 pc.

PART LIST
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
88 5689 992
Steamer Trunk Bar
B
Tools Required For Assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
A.
Top
1 pc.
D.
Stretcher
1 pc.
F.
Wine Glass Holder
.1 pc
I.
Rail
2 pcs.
O.
KD. Drawer
1 pc.
L.
Base
1 pc.
Also need the following from carton 88 5689 991 :
Part List in carton 88 5689 991
Side Panel (B)
Side Panel (C)
Shelf (E)
Shelf (G)
Middle Panel (H)
Back Panel (J)
Back Panel (K)
Door (M)
Door (N)
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
Hardware List in carton 88 5689 991
Hex Wrench
Caster
Wood Screw for Caster
Head Cap Bolt (short)
Head Cap Bolt (long)
Cross Dowel
Cam Lock
Cam Lock Screw
Wood Screw (long) for Drawer Side Part
Wood Screw (short) for Drawer Base
Pull Handle
Machine Screw
1 pc.
4 pcs.
18 pcs.
5 pcs.
7 pcs.
7 pcs.
21 pcs.
21 pcs.
9 pcs.
9 pcs.
4 pcs.
4 pcs.
(
)
Drawers require assembly please refer
to the last pages of these assembly instructions

Assembly Instructions 2/5
STEP 1
Put Cam Lock Screws into the
pre-drilled holes of Side Panel
(B) and (C), and tighten.
Attach Stretcher (D),Shelf (E)
(F),
Shelf (G) to Side Panel (C)
using Cam Locks.
Attach Rail (I) to Side Panel (C).
Attach Middle Panel (H) to
the unit.
(See figure 1)
Wine Glass Holder
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
B
C
Cam Lock Screw
C
DE
F
G
H
I
(Figure 1)
B
STEP 2
Attach Rail (I) to the unit.
Attach Side Panel (B) to the unit with Cam Locks.
I
Cam Lock
Cam Lock

Assembly Instructions 3/5
Attach unit from onto the unit from Step 3, using Cam Locks.Step 2
STEP 3
Cam Lock Screw
Attach Back Panel (J) to Back Panel (K).
Put the Cam Lock Screws into the pre-drilled of the unit.
STEP 4
J
K
Step 2
Step 3
J
K
Cam Lock

Assembly Instructions 4/5
STEP 5
Attach Base (L) to the unit with Head Cap Bolts and Cross Dowels.
(See figure 2)
Attach four Casters to Base (L) with
Wood Screws.
(See figure 3)
L
STEP 6
A
O
Turn the unit to its
upright position.
Attach the Door (M) and
(N) by sliding the door
lift hinges into the unit
lift hinges.
(See figure 4)
Attach Pull Handles to
the Door (M) and (N)
using Machine Screws.
(See figure 5)
Place Top (A) onto
the unit with
Head Cap Bolts (short).
Slide the Drawers (O)
into place.
M
N
Figure 5
Figure 3
Figure 4
Figure 2
Cross Dowel
Head Cap Bolt
Head Cap Bolt (short)
Machine Screw
Pull Handle
Wood Screw

Assembly Instructions 5/5
(Figure 1)
MAKE SURE ROLLER
IS ON THE BACK
O2
O2
O2
O3
O3
O3
O4
O4
O4
O5
O5
O1
O1
O1
Drawer
Part List
O1.
Front Part
1 pc.
O5.
Base Part
1 pc.
O2.
Back Part
1 pc.
O3.
Side Part
1 pc.
O4.
Side Part
1 pc.
(Figure 3)
(Figure 4)
Attach O1 to O3 and O4, using
a and
the wood screws ,
tighten halfway.
Attach O2 to O3 and O4 using
the wood screws ,
tighten halfway. (See figure 1)
Phillips screwdriver
long
long
(4X)
(4X)
Insert the wood screws (8X)
into the pre-drilled holes in O5,
tighten screws. (See figure 3)
short
Tighten all screws used in
drawer assembly.
Attach hardware pulls with
machine screws.
(See figure 4)
Slide O5 into the grooves in O3
and O4. Be sure to push
O5 all the way forward so
it meets O1. (See figure 2)
STEP 1
STEP 2
STEP 3
STEP 4
(Figure 2)