Home Styles Cabin Creek 88 5411 49 User manual

Part List
Hardware List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5411 49
Cabin Creek
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
A.
Seat
1 pc. C.
Back Frame
1 pc.
Wood Screw (long)
4 pcs. (+1 extra)
B.
Side Frame
2 pcs.
E.
Shelf
1 pc.
F.
Side Frame
1 pc.
H.
Back Frame
1 pc.
I.
Back Frame
1 pc.
D.
Stretcher
1 pc.
J.
Top
1 pc.
K.
Stretcher
1 pc.
L.
Shelf
1 pc.
M.
Stretcher
1 pc.
Hall Tree Stand
G.
Side Frame
1 pc.
Head Cap Bolt (short)
45 pcs. (+1 extra)
Flat Washer
56 pcs. (+1 extra )
Spring Washer
56 pcs. (+1 extra )
Steel Plate Connecter
2 pcs.(+1 extra)
Wood Screw
4 pcs.(+1 extra)
Tapered
Head Cap Bolt
4 pcs. (+1 extra)
Head Cap Bolt
for Stertcher (M)
4 pcs. (+1 extra)
Head Cap Bolt
5 pcs. (+1 extra)
Head Cap Bolt (long)
2 pcs. (+1 extra)

Assembly Instructions 2/4
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
* Use a soft cloth between these parts and the floor.
Flat Washer
Spring Washer
Head Cap Bolt (short)
STEP 1
Attach Back Frame (C), Stretchers (D) and Shelf (E) to Side Frame (B) with
Head Cap Bolts (short), Spring Washers and Flat Washers. (see Figure 1)
Attach Side Frame (B) to unit with Head Cap Bolts (Short), Spring Washers and Flat Washers.
Figure 1
B
B
C
D
E
STEP 2
Attach Seat (A) to unit with
Head Cap Bolts,
Spring Washers,
Flat Washers.
Flat Washer
Spring Washer
Head Cap Bolt
A

Assembly Instructions 3/4
STEP 3
Assemble Back Frame (I), Back Frame (H) and Stretcher (M) by using Head Cap Bolts (short),
Head Cap Bolts for Stretcher (M), Spring Washers and Flat Washers.
H
I
M
L
F
G
K
Attach Side Frame (F) to unit with Head Cap Bolts (short), Spring Washers and Flat Washers.
Attach Stretcher (K), Shelf (L) and Side Frame (G) to unit with Head Cap Bolts,
Spring Washers and Flat Washers.
STEP 4
Flat Washer
Spring Washer
Head Cap Bolt (short)
Head Cap Bolt for Stretcher (M)
Spring Washer
Flat Washer
Spring Washer
Flat Washer
Head Cap Bolt (short)

Assembly Instructions 4/4
STEP 5
Attach Top (J) to unit with Head Cap Bolts,
Spring Washers, Flat Washers
and Wood Screws (long).
J
Figure 2
Attach upper unit onto base unit with
Head Cap Bolts (long) Spring Washers,
Flat Washers.
Attach Steel Plate Connecters
to unit with Tapered Head Cap Bolts
and Wood Screws.
To level the unit, adjust the
adjustable levelers on the
bottom of unit. (see Figure 2)
STEP 6
Steel Plate Connecter
Tapered
Head Cap Bolt
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt
Wood Screw (long)
Flat Washer
Spring Washer
Head Cap Bolt (long)