Home Styles 88 5538 101 User manual

Part List
I.
Base
1 pc.
R.
Back Support
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
Casual Attire For Today's Home
88 5538 101
Entertainment Credenza
Country Casual
Tools required for assembly : Phillips screwdriver
Hardware List
For assembly see instructions in carton 88 5538 102
Cam Lock
28 pcs.(+1 extra)
Cam Lock Screw
28 pcs.(+1 extra)
Adjustable Pin
20 pcs.(+1 extra)
Pull Handle
4 pcs.
Machine Screw
4 pcs.
H.
Plinth
1 pc.
J.
Back Panel
1 pc.
Wood Screw
for Back Panel
12 pcs.(+1 extra)
Wood Screw
for Plinth
2 pcs.(+1 extra)
M.
Shelf
2 pcs.

Part List (in this carton)
Also need the following from carton 88 5538 101 :
B.
Side Panel
.1 pc
E.
Middle Panel
.1 pc
G.
Back Panel
1 pc.
C.
Side Panel
1 pc.
N.
Door
1 pc.
O.
Door
1 pc.
P.
Door
1 pc.
Q.
Door
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
Hardware List in carton 88 5538 101
Cam Lock Screw
Cam Lock
Wood Screw for Plinth
Adjustable Pin
Pull Handle
Machine Screw
29 pcs.
29 pcs.
3 pcs.
13 pcs.
21 pcs.
4 pcs.
4 pcs.
Wood Screw for Back Panels
Tools required for assembly : Phillips screwdriver
F.
Fixed Shelf
1 pc.
D.
Middle Panel
.1 pc
L.
Shelf
1 pc.
Part List in carton 88 5538 101
Top (A)
Plinth (H)
Base (I)
Back Panel (J)
Back Support (R)
Shelf (M)
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
2 pcs.
M.
Shelf
2 pcs.
88 5538 102
Entertainment Credenza
Country Casual
S.
Leg
1 pc.
K.
Back Panel
2 pcs.

D
E
Cam Lock Screw
Cam Lock
Magnet
G
F
STEP 3
Attach Fixed Shelf (F) to Middle Panel (D) with Cam Locks (see Figure 1),
to the unit with Cam Locks.
then slide
Back Panel (G) into position.
Attach Middle Panel (E)
(Figure 1)
STEP 1
STEP 2
Assembly Instructions 2/4
A
Cam Lock Screw
Insert Cam Lock Screws
into the pre-drilled holes
of
Base (I).
Side Panel (B) and (C),
Middle Panel (D) and (E),
Plinth (H) and
Magnet
BC
D
E
H
I
Insert Cam Lock Screws into
the pre-drilled holes of Top (A).

STEP 4
Assembly Instructions 3/4
Cam Lock Screws
Attach Base (I) to the unit with Cam Locks.
Put 3X Cam Lock Screws into the pre-drilled holes of Base (I) as shown, then attach
Back Support (R) to Base (I) with Cam Locks and attach Side Panel (B) and (C), Plinth (H)
to the unit with Cam Locks.
Tighten up Leg (S) in the pre-drilled hole of unit as shown.
Tighten 2X wood screws into Plinth.
I
B
R
HC
Cam Lock
A
Adjustable Pin
Cam Lock
STEP 5
Slide Back Panels
(J) and (K) into place.
Place Top (A) onto
the unit, using
Cam Locks.
Insert Adjustable Pins into
side panels and middle panels at the desired level. (See figure 2)
Place Shelves (L) and (M) into position.
L
J
K
M
M
M
M
K
(Figure 2)
S

O
P
Q
Attach Doors (N), (O), (P) and (Q) by sliding
the door lift hinges into the side panels lift hinges. (See figure 3)
Assemble Pull Handles to Doors with Machine Screws. (See figure 4)
STEP 6
Assembly Instructions 4/4
N
(Figure 3)
(Figure 4)
STEP 7
(Figure 5)
Insert 12X Wood Screws from the back of the unit,
tighten up all the Wood Screws. (See figure 5)
Note: Please make sure unit is level before tightening these screws.