Home Styles 88 5531 751 User manual

Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
88 5531 751
Closet Wall Drawer Unit
IMPORTANT
F.
Back Panel
1 pc.
For assembly see instructions in carton 88 5531 752.
A.
Top
1 pc. B.
Front Rail
1 pc.
C.
Shelf
3 pcs.
D.
Side Panel
1 pc.
E.
Side Panel
1 pc.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
88 5531 752
Closet Wall Drawer Unit
IMPORTANT
I.
Plinth
1 pc.
N.
Front Rail
2 pc.
H.
Front Rail
1 pc.
L.
Back Panel
1 pc.
M.
Bottom
1 pc.
Refer to the last page(s) of these
Instructions for drawer assembly.
O.
Drawer
3 pcs.
M4x15
Machine Screw
3 pcs.
Adjustable Pin
12 pcs. (+1 extra)
Knob
3 pcs.
J.
Side Panel
1 pc.
K.
Side Panel
1 pc.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Carton 88 5531 751 is also needed for assembly.
M3x19
Wood Screw for
Leveler
16 pcs. (+1 extra)
Connector
2 pcs.
Leveler
4 pcs.
Plug
4 pcs. (+1 extra)
Hex Wrench
1 pc.
M3x15
Wood Screw for
Connector
8 pcs. (+1 extra)
M3x25
Wood Screw (long)
10 pcs. (+1 extra)
G.
Top
1 pc.

Assembly Instructions 6/8
Drill 3/8” hole in wall
Top of unit
Hardware List
STEP 9
Drill a 3/8” hole in wall in-line with
the pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
If assembling multiple Closet Wall Units
together, go to and complete Step 10 now,
then return to and complete Step 9.
Slide Tipover Restraint through
Bracket on wall and Bracket on unit.
(See Figure 5)
Put tie end of Tipover Restraint into lock
end of Tipover Restraint and pull until tight.
Anchor
1 pc. (+1 extra)
Bracket
2 pcs. (+1 extra)
Tipover Restraint
1 pc. (+1 extra)
M3.5x40
Wall Screw
1 pc. (+1 extra)
M3.5x16
Wood Screw
1 pc. (+1 extra)
Figure 5
Wood Screw
Wall Screw
Bracket
on wall
Anchor in wall
3/8” wall hole
Pre-drilled hole
at top of unit
Tie end
Lock end
Bracket at
top of unit
Tipover
Restraint
IMPORTANT
To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly.
Pre-drilled hole
at top of unit

Part List
Assembly Instructions 8/8
STEP 1
Attach O2 to O3 and O4, then flip the locks.
(See Figure A)
STEP 2
Slide O5 into the grooves in O3
and O4. Be sure to push O5 all
the way forward so it meets O2.
STEP 3
Attach O1 to unit, then flip the locks.
STEP 4
Attach Knob with
machine screw.
Figure 2
O2
O4
O5
O1
O1.
Drawer Front
3 pcs.
O2.
Drawer Back
3 pcs.
O3.
Drawer Side
3 pcs.
O4.
Drawer Side
3 pcs.
O5.
Drawer Bottom
3 pcs.
Drawer (O)
O3
O2

Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
88 5531 761
Closet Wall Shelf Unit
IMPORTANT
F.
Back Panel
1 pc.
For assembly see instructions in carton 88 5531 762.
A.
Top
1 pc. B.
Front Rail
1 pc.
C.
Shelf
3 pcs.
D.
Side Panel
1 pc.
E.
Side Panel
1 pc.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
88 5531 762
IMPORTANT
I.
Plinth
1 pc.
H.
Front Rail
1 pc.
L.
Back Panel
1 pc.
M.
Bottom
1 pc.
Adjustable Pin
24 pcs. (+1 extra)
J.
Side Panel
1 pc.
K.
Side Panel
1 pc.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Carton 88 5531 761 is also needed for assembly.
M3x19
Wood Screw for
Leveler
16 pcs. (+1 extra)
Connector
2 pcs.
Leveler
4 pcs.
Plug
4 pcs. (+1 extra)
Hex Wrench
1 pc.
M3x15
Wood Screw for
Connector
8 pcs. (+1 extra)
M3x25
Wood Screw (long)
6 pcs. (+1 extra)
Closet Wall Shelf Unit
C.
Shelf
3 pcs.
G.
Top
1 pc.

Assembly Instructions 6/7
Drill 3/8” hole in wall
Top of unit
Hardware List
STEP 9
Drill a 3/8” hole in wall in-line with
the pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
If assembling multiple Closet Wall Units
together, go to and complete Step 10 now,
then return to and complete Step 9.
Slide Tipover Restraint through
Bracket on wall and Bracket on unit.
(See Figure 5)
Put tie end of Tipover Restraint into lock
end of Tipover Restraint and pull until tight.
Anchor
1 pc. (+1 extra)
Bracket
2 pcs. (+1 extra)
Tipover Restraint
1 pc. (+1 extra)
M3.5x40
Wall Screw
1 pc. (+1 extra)
M3.5x16
Wood Screw
1 pc. (+1 extra)
Figure 5
Wood Screw
Wall Screw
Bracket
on wall
Anchor in wall
3/8” wall hole
Pre-drilled hole
at top of unit
Tie end
Lock end
Bracket at
top of unit
Tipover
Restraint
IMPORTANT
To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly.
Pre-drilled hole
at top of unit

Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
88 5531 771
Closet Wall Hanging Unit
IMPORTANT
For assembly see instructions in carton 88 5531 772.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
F.
Back Panel
1 pc.
A.
Top
1 pc.
B.
Front Rail
1 pc.
C.
Side Panel
1 pc.
D.
Side Panel
1 pc.
E.
Back Panel
1 pc.

Hardware List
Part List
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Carton 88 5531 771 is also needed for assembly.
IMPORTANT
M3x19
Wood Screw for
Leveler
16 pcs. (+1 extra)
Connector
2 pcs.
Leveler
4 pcs.
Plug
4 pcs. (+1 extra)
Hex Wrench
1 pc.
M3 x1.5 6
Wood Screw for
Rod Support
8 pcs. (+1 extra)
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
88 5531 772
Closet Wall Hanging Unit
H.
Front Rail
1 pc.
O.
Bottom
1 pc.
K.
Side Panel
1 pc.
L.
Side Panel
1 pc.
M.
Back Panel
1 pc.
I.
Rod
2 pcs.
J.
Plinth
1 pc.
N.
Back Panel
1 pc.
Rod Support
4 pcs.
M3x15
Wood Screw for
Connector
8 pcs. (+1 extra)
M3x25
Wood Screw (long)
7 pcs. (+1 extra)
G.
Top
1 pc.

Assembly Instructions 7/8
Hardware List
STEP 10
Drill a 3/8” hole in wall in-line with
the pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
If assembling multiple Closet Wall Units
together, go to and complete Step 11 now,
then return to and complete Step 10.
Slide Tipover Restraint through
Bracket on wall and Bracket on unit.
(See Figure 7)
Put tie end of Tipover Restraint into lock
end of Tipover Restraint and pull until tight.
Anchor
1 pc. (+1 extra)
Bracket
2 pcs. (+1 extra)
Tipover Restraint
1 pc. (+1 extra)
M3.5x40
Wall Screw
1 pc. (+1 extra)
M3.5x16
Wood Screw
1 pc. (+1 extra)
Figure 7
Wood Screw
Wall Screw
Bracket
on wall
Anchor in wall
3/8” wall hole
Pre-drilled hole
at top of unit
Tie end
Lock end
Bracket at
top of unit
Tipover
Restraint
IMPORTANT
To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly.
Top of unit
Drill 3/8” hole in wall
Pre-drilled hole
at top of unit