Home Styles 4529 95 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestylesfurniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
4529 95-
Kitchen Cart
IMPORTANT
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M6x35
Head Cap Bolt (short)
4 pcs. (+1 extra)
M6x50
Head Cap Bolt (long)
6 pcs. (+1 extra)
Refer to later page(s) of these
instructions for drawer assembly.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Caster
2 Locking
2 Non-Locking
4 pcs.
Cam Lock
15 pcs. (+2 extra)
M4x16
Wood Screw
for Caster
16 pcs. (+1 extra)
Cam Lock Screw
15 pcs. (+1 extra)
Cross Dowel
6 pcs. (+1 extra)
Adjustable Pin
8 pcs. (+1 extra)
M3.5x25
Wood Screw (long)
16 pcs. (+1 extra)
M3.5x16
Wood Screw (short)
12 pcs. (+1 extra)
Handle
6 pcs.
Q.
Drawer
2 pcs.
K.
Divider
1 pc.
J.
Front Rail
1 pc.
E2.
Back Rail
1 pc.
E1.
Back Rail
1 pc.
D.
Side Panel
1 pc.
C.
Middle Panel
1 pc.
B.
Side Panel
1 pc.
A.
Top
1 pc.
I.
Front Rail
1 pc.
F.
Back Upright
1 pc.
G.
Back Upright
2 pcs.
H.
Back Panel
4 pcs.
N.
Shelf
2 pcs.
M.
Side Bar
2 pcs.
L.
Base
1 pc.
M4x25
Machine Screw
12 pcs.
P.
Door
2 pcs.
O.
Door
2 pcs.

Cam Lock Screw
Assembly Instructions 2/6
IMPORTANT
·Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.·
Do not tighten all the bolts until each part is properly assembled.·
Keep Hex Wrench as the bolts may need to be tightened in the future.·
Figure 1
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Top (A),
Side Panels (B), (D) and Back Upright (F), then tighten.
(See Figure 1)
Cam Lock
STEP 2
Attach Back Rail (E1)
to Side Panel (B) with
Cam Lock. (See Figure 2)
Attach Back Uprights (F), (G)
to unit.
Slide Back Panels (H) into position.
Attach Back Rail (E2)
to unit with Cam Lock.
Figure 2
A
B
D
F
E2
H H HHB
GG
F
E1

Assembly Instructions 3/6
Cam Lock
STEP 3
Attach Front Rail (I) to unit
with Cam Lock.
Attach Divider (K) to unit
with Cam Lock.
Attach Front Rail (J) to unit
with Cam Lock.
Cam Lock
STEP 4
Attach Side Panel (D)
to unit with Cam Locks.
Attach Middle Panel (C) to unit.
Attach Base (L) to unit with Head Cap Bolts (long) and Cross Dowels. (See Figure 3)
Note: Arrow label indicates front of Base (L).
Figure 3
Head Cap Bolt (long)
Cross Dowel
Arrow
label at front
J
I
K
L
D
C

Assembly Instructions 4/6
Figure 5
STEP 6
Turn unit over to its
upright position.
Attach Side Bars (M) to unit
with Head Cap Bolts (short).
(See Figure 5)
Attach Top (A) to unit with Cam Locks.
Note: Arrow label indicates front of Top (A).
Insert Adjustable Pins into side panels and middle panel at desired level.
Place Shelves (N) into position.
Adjustable Pin
Head Cap Bolt
(short)
Cam Lock
STEP 5
Attach Casters to unit with
Wood Screws for Caster,
with Locking Casters at front.
(See Figure 4)
Figure 4
Wood Screw
for Caster
Locking Caster
Non-Locking Caster
Arrow label at front
A
M
M
NN

Part List
Assembly Instructions 5/6
Q1.
Drawer Front
2 pcs.
Q2.
Drawer Back
2 pcs.
Q3.
Drawer Side
2 pcs.
Q4.
Drawer Side
2 pcs.
Q5.
Drawer Bottom
2 pcs.
Drawer (Q)
STEP 7
Attach Drawer Front (Q1) and Drawer
Back (Q2) to Drawer Side (Q3)
with Wood Screws (long).
Attach Drawer Side (Q4) to unit
with Wood Screws (long).
STEP 9
Attach Handle with Machine Screws.
Bottom
Q3
Q1
Q2 Q4
Q5
Roller at back
Wood Screw (long)
Wood Screw (short)
Machine Screw
Handle
STEP 8
Slide Drawer Bottom (Q5) into groove.
Attach Drawer Bottom (Q5) to
unit with Wood Screws (short).

Assembly Instructions 6/6
STEP 10
Attach Doors (O) and (P) to unit by sliding door hinges into side panel and middle panel hinges.
(See Figure 6)
Attach Handles to Doors (O) and (P) with Machine Screws.
(See Figure 7)
Slide Drawers (Q) into position.
Figure 6 Figure 7
Handle
Machine Screw
OP
QQ
O
P

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestylesfurniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestylesfurniture.com,
[email protected], 888-680-7460, 877-831-0319