Home Styles 20 05420 0016 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
20 05420 0016
Student Desk
B.
Side Frame
1 pc.
D.
Front Rail
1 pc.
E.
Divider
1 pc.
F.
Back Panel
1 pc.
C.
Side Frame
1 pc.
G.
Stretcher
1 pc.
A.
Top
1 pc.
Refer to later page(s) of these
instructions for drawer assembly.
H.
Drawer
2 Pcs.
Cam Lock
2 pcs. (+2 extra)
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M6x35
Head Cap Bolt
12 pcs. (+1 extra)
Spring Washer
12 pcs. (+1 extra)
Flat Washer
12 pcs. (+1 extra)
Handle
2 pcs.
Machine Screw
2 pcs.
M4x22
Cam Lock Screw
2 pcs. (+2 extra)
M3.5x38
Wood Screw
2 pcs. (+1 extra)
M3.5x25
Flat Head Screw
1 pcs. (+1 extra)

Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Side Frames (B) and (C), then tighten.
(See Figure 1)
STEP 2
Attach Back Panel (F) to Side Frame (B) with Head Cap Bolts,
Spring Washers and Flat Washers.
(See Figure 2)
Attach Divider (E) to unit. Figure 2
Figure 1
Cam Lock Screw
Flat Washer
Spring Washer
Head Cap Bolt B
F
B
C
E

Assembly Instructions 3/5
STEP 4
Place Top (A) upside down on a soft cloth.
Attach unit to Top (A) with
Head Cap Bolts, Spring Washers and
Flat Washers, tightening bolts only halfway.
Tighten all Head Cap Bolts.
Flat Washer
Spring Washer
Head Cap Bolt
Cam Lock
G
Head Cap Bolt
Spring Washer
Flat Washer
Wood Screw
Flat Head Screw
Figure 4
B
C
D
STEP 3
Attach Front Rail (D) to
unit with Cam Lock and
Flat Head Screw.
(See Figures 3)
Attach Stretcher (G) to unit
with Wood Screw.
(See Figure 4)
Attach Side Frame (C)
to unit with Cam Lock,
Wood Screw, Head Cap Bolts,
Spring Washers and Flat Washers.
A
Figure 3

Assembly Instructions 4/5
Drawer (H)
H1.
Drawer Front
2 pcs.
H2.
Drawer Back
2 pcs.
H3.
Drawer Side
2 pcs.
H4.
Drawer Side
2 pcs.
H5.
Drawer Bottom
2 pcs.
STEP 5
Attach Drawer Sides (H3) and (H4) to
Drawer Back (H2), then flip the Locks.
(See Figures 5 and 6)
Figure 5 Figure 6
H2
H3
H4
Lock
STEP 6
Slide Drawer Bottom (H5) into grooves
in Drawer Sides (H3) and (H4) until it meets
Drawer Back (H2).
Attach Drawer Front (H1) to unit, then flip
the Locks.
H2
H3
H4 H5
H1
Part List
Machine Screw
Handle
STEP 7
Attach Handle with Machine Screw.

Assembly Instructions 5/5
STEP 8
Turn unit to its’ upright position.
Slide Drawers (H) into position.
Level unit by adjusting the adjustable levelers on bottom of unit.
(See Figure 7)
H
H
Figure 7

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319