Home Styles Modern Craftsman 885050171 User manual

Hardware List
D.
Side Frame
1 pc.
B.
Stretcher
2 pcs.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Cabinet
1 pc.
88 5050 171
Modern Craftsman
Corner Table
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Part List
E.
Stretcher
2 pcs.
Head Cap Bolt
12 pcs. (+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Flat Washer
12 pcs. (+1 extra )
Spring Washer
12 pcs. (+1 extra )
Tools required for assembly : Phillips screwdriver
Wood Screw
8 pcs. (+1 extra)
C.
Side Frame
1 pc.
Tools recommended for assembly :Level

C
D
B
B
Assembly Instructions 2/2
STEP 1
Assemble Stretchers (B)
and (E) to
Side Frame (C) and (D)
with Head Cap Bolts,
Spring Washers and Flat Washers.
(see Figure 1)
Flat Washer
Spring Washer
Head Cap Bolt
Figure 1
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
E
E
Attach unit onto Cabinet (A)
with Wood Screws.
Turn unit to it’s upright position.
To level the unit, adjust
the adjustable levelers on the bottom of unit.
(see Figure 2)
STEP 2
A
Wood Screw
Figure 2