Home Styles 88 6000 00 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 6000 00
The Deluxe Foosball Table
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319

Part List
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
A.
Side Panel
2 Pcs.
E.
Leg
2 Pcs.
K.
End Ramp
2 Pcs.
Q.
Support Brace
2 Pcs.
R.
Support Rod
2 Pcs.
S.
Ball
4 Pcs.
P.
Five Player Rod
2 Pcs.
O.
Two Player Rod
2 Pcs.
N.
Three Player Rod
4 Pcs.
L.
End Ramp
2 Pcs.
M.
Side Ramp
2 Pcs.
I.
Blue Team Player
13 Pcs.
J.
Red Team Player
13 Pcs.
F.
Leg
2 Pcs.
G.
Leg Panel
4 Pcs.
H.
Ball Entry Cup
2 Sets
B1.
Red Score
End Panel
1 Pc.
B2.
Blue Score
End Panel
1 Pc.
C.
Playing Field
1 Pc.
D.
Bottom Panel
2 Pcs.
Head Cap Bolt (short)
8 Pcs.(+1 extra)
Bumper
16 Pcs.
Flat Head Screw
(short)
12 Pcs.(+1 extra)
Flat Head Screw
(long)
8 Pcs.(+1 extra)
Round Head Screw
(short)
2 Pcs.(+1 extra)
Cress Dowel
8 Pcs.(+1 extra)
Hex Nut
4 Pcs.(+1 extra)
Round Head Bolt
26 Pcs.(+1 extra)
Head Cap Bolt (long)
8 Pcs. (+1 extra)
Bolt
8 Pcs. (+1 extra)
Flat Washer (small)
12 Pcs. (+1 extra)
Flat Washer (middle)
8 Pcs. (+1 extra)
Flat Washer (large)
8 Pcs. (+1 extra)
Lock Nut
26 Pcs. (+1 extra)
Nut
8 Pcs. (+1 extra) Handle
8 Pcs.
End Cap
8 Pcs.
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Wrench
1 Pc.
Plastic Washer
16 Pcs.
Straight Hex
1 Pc.
Hex Wrench
1 Pc.
1
10
2 3 45 6 7 8
911 12 13 14 15
16
17 18 19
20 21

Assembly Instructions 3
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the oor.
STEP 1
Assemble Leg (E), Legs Panel (G)
and Leg (F) with Head Cap Bolts
(long), Flat Washers (small) and
Cross Dowels.
Repeat this step.
STEP 2
Attach Red Score End Panel (B1)
and Blue Score End Panel (B2) to
Side Panel (A) with Head Cap Bolts
B
E
B
A
B
B1
B
B2
B
G
B
G
B
F
Head Cap Bolt (long)
Flat Washer (small)
Head Cap Bolt (short)
Flat Washer (middle)
Cross Dowel
/6
10
2
7
3
5

Assembly Instructions 4
STEP 3
Slide Playing Field (C)
into position.
STEP 4
Attach Side Panel (A) to unit with Head Cap Bolts (short) and Flat Washers (middle).
Insert Flat Head Screws (long) into the pre-drilled holes of playing eld.
Attach Field Support Brace (Q) and Support Rod (R) to unit with Flat Washers (small) and
Hex Nuts.
B
Q
B
Q
B
R
B
R
B
A
B
C
M
Hex Nut
Flat Washer (small)
Flat Washer (middle)
Head Cap Bolt (short)
Flat Head Screw (long)
/6
11
5
19
7
2

Assembly Instructions 5
STEP 6
Attach leg assemblies
from Step 1 to unit with
Flat Washers (large),
Nuts and Bolts.
STEP 5
Attach Bottom Panels (D)
to both ends of unit with
Flat Head Screws (short).
B
D
Flat Head Screw (short)
Nut
Flat Washer (large)
Bolt
STEP 7
Remove the sticker covers from the
bottom side of End Ramps (K), (L)
and Side Ramps (M).
Attach End Ramps (K), (L)
and Side Ramps (M) to unit by
pressing them into place on the side
and ends of the playing eld.
B
M
B
M
B
K
B
K
B
L
B
L
/6
18
12
4
8

Assembly Instructions 6
STEP 8
Attach Ball Entry Cups (H)
to both sides of unit with
Round Head Screws (short).
(See gure 1)
Slide two Three Player Rods (N),
a Two Player Rod (O) and
a Five Player Rod (P) into
the holes in one side of unit
with the Handle hole end of
the player rods inserted last.
Slide onto the player rods in order; Bumper,
Plastic Washer (ange facing in),
appropriate number of Red Team Players (J) (round chest hole
facing Blue Score End Panel), Plastic Washer (ange facing in)
and Bumper.
Slide the player rods through the corresponding holes in other
side of unit.
Attach Red Team Players (J) to Three Player Rods (N),
Two Player Rod (O) and Five Player Rod (P) with Round
Head Bolts and Lock Nuts. (See gure 2)
Repeat this process for Blue Team Players (I) on other side of unit.
STEP 9
Slide Handles and End Caps rmly into position.
Handle
End Cap
Figure 1
Figure 2
Bumper
Plastic Washer
Round Head Bolt
Lock Nut
Round Head Screw
Blue Score End Panel
B
J
B
N
B
N
B
H
B
P
B
O
/6
17
21
6
20
13
15 14