Home Styles 88 5412 94Q1 User manual

Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
88 5412 94Q1
Kitchen Island
IMPORTANT
A1.
Top
1 pc.
A2.
Leaf Top
1 pc.
For assembly see instructions in carton 88 5412 943.
Patent 8,584,600 B2
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.

Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
88 5412 941
Kitchen Island
IMPORTANT
A1.
Top
1 pc.
A2.
Leaf Top
1 pc.
For assembly see instructions in carton 88 5412 943.
Patent 8,584,600 B2
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.

Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
88 5412 942
Kitchen Island
IMPORTANT
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
D.
Middle Panel
1 pc.
For assembly see instructions in carton 88 5412 943.
Patent 8,584,600 B2
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.

Hardware List
Part List
Tool(s) required for assembly: LevelPhillips screwdriver,
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
88 5412 943
Kitchen Island
IMPORTANT
Cartons 88 5412 941/94Q1, 942 are also needed for assembly.
E.
Back Panel
2 pcs.
F.
Back Upright
1 pc.
G.
Leg
2 pcs.
H.
Back Support
1 pc.
I.
Back Stretcher
1 pc.
J.
Front Stretcher
1 pc.
K.
Front Stretcher
1 pc.
L.
Shelf
1 pc.
O.
Drawer
1 pc.
P.
Drawer
1 pc.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Cam Lock Screw
16 pcs. (+2 extra)
Cam Lock
16 pcs. (+4 extra)
M6x35
Head Cap Bolt
4 pcs. (+1 extra)
Adjustable Pin
4 pcs. (+1 extra)
M4x25
Machine Screw
14 pcs. (+1 extra)
Knob
7 pcs.
M4x25
Wood Screw (long)
32 pcs. (+1 extra)
M3x16
Wood Screw (short)
34 pcs. (+1 extra)
M4x19
Wood Screw (middle)
9 pcs. (+1 extra)
Magnet
1 pc.
Refer to the last page(s) of these
instructions for drawer assembly.
Patent 8,584,600 B2
N.
Door
1 pc.
Q.
Drawer
2 pcs.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
M.
Base
1 pc.

Assembly Instructions 2/8
STEP 1
Insert Cam Lock Screws into the pre-drilled
holes of Top (A1), Side Panels (B), (C),
Middle Panel (D) and Base (M).
(See Figure 1)
Attach Magnet to Front Stretcher (J)
with Wood Screws (short).
(See Figure 2)
A1
B
C
Cam Lock Screw
Figure 1
M
J
D
Magnet
Wood Screw (short)
Figure 2
Cam Lock Screw
STEP 2
Attach Legs (G) to Base (M).
Attach Middle Panel (D) to unit with
Cam Locks. (See Figure 3)
Attach Front Stretcher (J) to unit.
G
G
M
D
J
Figure 3
Cam Lock
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.

Assembly Instructions 3/8
STEP 3
Attach Back Stretcher (I) and Front Stretcher (K)
to Side Panel (B) with Cam Locks.
Attach unit from Step 2 to unit with Cam Lock
and Head Cap Bolts. (See Figure 4)
Figure 4
Head Cap Bolt
B
Cam Lock
I
K
E
E
F
H
STEP 4
Slide Back Panels (E) and Back Upright (F) into place.
Attach Back Support (H) to Back Upright (F).
C
Cam Lock
Head Cap Bolt
STEP 5
Attach Side Panel (C) to unit with
Cam Locks and Head Cap Bolts.

Assembly Instructions 4/8
STEP 6
Attach Leaf Top (A2) to Top (A1)
with Wood Screw (middle).
(See Figure 5)
Figure 7 Figure 8
Figure 5
STEP 7
Turn the unit from Step 5
to its’ upright position.
Level the unit by adjusting the adjustable
levelers on the bottom of legs.
(See Figure 6)
Note: Unit must be level to proceed.
Insert Wood Screws (short)
into pre-drilled holes of unit.
Attach Top unit from Step 6 to
unit from Step 5 with Cam Locks.
A2
A1
Wood Screw (middle)
STEP 8
Attach Knob to Door (N) with
Machine Screws. (See Figure 7)
Attach Door (N) to unit by sliding
the door lift hinges into the side panel
lift hinges. (See Figure 8)
Insert Adjustable Pins into middle panel
and side panel at the desired level.
Place Shelf (L) into position.
Slide Drawers (O), (P)
and (Q) into position. N
OP
QL
Adjustable Pin
Q
Wood Screw (short)
Cam Lock
Figure 6

Assembly Instructions 5/8
STEP 1
Lift up the Leaf Top.
Top extension instructions
STEP 2
Holding the Leaf Top, pull out
a back leg from the unit; then
pull out the other back leg.
Note: Unit must be level for
the back legs to pull out.

Part List
STEP 3
Attach Knobs with Machine Screws.
Assembly Instructions 6/8
Drawer (O)
STEP 1
Attach Drawer Front (O1) and Drawer
Back (O2) to Drawer Side (O3) with
Wood Screws (long).
Attach Drawer Side (O4) to unit with
Wood Screws (long).
O4
O1
O3
O5
O1.
Drawer Front
1 pc.
O2.
Drawer Back
1 pc.
O3.
Drawer Side
1 pc.
O4.
Drawer Side
1 pc.
O5.
Drawer Bottom
1 pc.
STEP 2
Slide Drawer Bottom (O5) into the grooves
of Drawer Sides (O3) and (O4) until it meets
Drawer Front (O1).
Attach Drawer Bottom (O5) to unit with
Wood Screws (short).
Roller at back
O4
O2
O1
O3

Part List
Assembly Instructions 7/8
STEP 3
Attach Knobs with Machine Screws.
Drawer (P)
STEP 1
Attach Drawer Front (P1) and Drawer
Back (O2) to Drawer Side (O3) with
Wood Screws (long).
Attach Drawer Side (O4) to unit with
Wood Screws (long).
STEP 2
Slide Drawer Bottom (O5) into the grooves
of Drawer Sides (O3) and (O4) until it meets
Drawer Front (P1).
Attach Drawer Bottom (O5) to unit with
Wood Screws (short).
P1
P1.
Drawer Front
1 pc.
O2.
Drawer Back
1 pc.
O3.
Drawer Side
1 pc.
O4.
Drawer Side
1 pc.
O5.
Drawer Bottom
1 pc.
O4
O3
O5
Roller at back
P1
O4
O2
O3