Home Styles 88 5060 65 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5060 65
Baker’s Rack
Tools recommended for assembly : Level
Tools required for assembly : Phillips screwdriver
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
M6x18
Head Cap Bolt
for Back Stretcher
1 Pc. (+1 extra)
M6x28
Tapered Head Cap Bolt
for Side Bar
4 Pcs. (+1 extra)
M6x16
Tapered Head Cap Bolt
18 Pcs. (+1 extra)
Nut Cap
1 Pc. (+1 extra)
Adjustable Pin
4 Pcs. (+1 extra)
M4x28
Wood Screw
for Shelf
16 Pcs. (+1 extra)
M4x12
Wood Screw
for Glass Holder
6 Pcs. (+1 extra)
D.
Side Frame
1 Pc.
B.
Side Frame
1 Pc.
E.
Side Frame
1 Pc.
C.
Side Frame
1 Pc.
F.
Back Stretcher
1 Pc.
A.
Top
1 Pc.
G.
Shelf
1 Pc.
H.
Adjustable Shelf
1 Pc.
I.
Shelf
2 Pcs.
J.
Glass Holder
1 Pc.
K.
Back Stretcher
2 Pcs.
M.
Side Bar
2 Pcs.
L.
Stretcher
2 Pcs.

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all head cap bolts and wood screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
*After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 2
Attach Back Stretcher (F) and
Stretchers (L) to side frame unit
with Tapered Head Cap Bolts.
Attach side frame unit to unit
with Tapered Head Cap Bolts.
STEP 1
Attach Side Frame (B) to Side Frame (D)
and Side Frame (C) to Side Frame (E) with
Tapered Head Cap Bolts.
(See Figure 1)
B
D
C
E
L
F
L
/4
I
JSTEP 3
Attach Glass Holder (J) to Shelf (I)
with Wood Screws for Glass Holder.
(See Figure 2)
Tapered Head Cap Bolt
Tapered Head Cap Bolt
Wood Screw for Glass Holder
Figure 1
Figure 2

Assembly Instructions 3/4
STEP 4
Turn the unit to its’ upright position.
Attach Side Bars to unit with Tapered Head Cap Bolts
for Side Bar.
Attach Back Stretchers (K) to each other with
Head Cap Bolt and Nut Cap.
(See Figure 3)
Attach back stretcher unit to unit with
Tapered Head Cap Bolts.
A
M
K
K
M
I
I
G
STEP 5
Attach Top (A), Shelves (I)
and Shelf (G) to unit with Wood Screws
for Shelf.
Wood Screw for Shelf
Figure 3
Tapered Head Cap Bolt
for Side Bar
Tapered Head Cap Bolt

Assembly Instructions 4/4
H
STEP 6
Turn the unit to its’ upright position.
Insert Adjustable Pins into side frames unit at the desired level.
Place Shelf (H) into position.
To level the unit, adjust the adjustable levelers on legs of unit.
(See fi gure 4)
Adjustable Pin
Figure 4