Home Styles Monarch Dining Chair User manual

Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Hardware List
Tools required for assembly : Phillips screwdriver
A.
Seat
1 pc.
D.
Back Frame
.1 pc
F.
Side Stretcher
1 pc.
E.
Side Stretcher
1 pc.
Head Cap Bolt
4 pcs.(+1 extra)
Spring Washer
11 pcs.(+1 extra)
Flat Washer
11 pcs.(+1 extra)
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Key Wrench
1 pc.
Head Cap Bolt
(long)
4 pcs.(+1 extra)
Wood Screw
4 pcs.(+1 extra)
Head Cap Bolt
(Short)
3 pcs.(+1 extra)
B.
Leg
1 pc.
C.
Leg
1 pc.
Monarch Dining Chair
88 5008 80
Small
Hex Wrench
1 pc.

Assembly Instructions
Attach Leg (B) and (C) to Seat (A)
with Flat Washers ,Spring Washers and
Head Cap Bolts.
Tighten Head Cap Bolts only half way.
Attach Side Stretcher (F) to Leg (C) and
Side Stretcher (E) to Leg (B) with Wood
Screws.(see Figure 1)
STEP 1
STEP 2
Attach the Back Frame (D) to the
unit with Flat Washers
Spring Washers ,Head Cap Bolts (Short),
Head Cap Bolts (long) and Wood Screws.
(see Figure 2) and (see Figure 3)
Tighten all Head Cap Bolts.
Flat Washer
Spring Washer
Head Cap Bolt (short)
Wood Screw
Wood Screw
Figure 1
D
Flat Washer
Spring Washer
Head Cap Bolt
Head Cap Bolt Assembly
(Legs Part)
Flat
Washer
Spring
Washer
Head Cap Bolt
(long)
Hex Wrench
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
A
B
C
E
F
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt
(Short)
Hex Wrench
Figure 2 Figure 3