Home Styles 5523-88 User manual

Part List
E.
Side Stretcher
1 pc.
A.
Seat
1 pc.
F.
Side Stretcher
1 pc.
G.
Front Stretcher
1 pc.
D.
Back Frame
1 pc.
5523-88
Bar Stool
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
B.
Leg
1 pc.
C.
Leg
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
Hardware List
Tool(s) required for assembly: Phillips screwdriver
M6x70
Head Cap Bolt (long)
4 pcs. (+1 extra)
M6x35
Head Cap Bolt (short)
3 pcs. (+1 extra)
M6x50
Head Cap Bolt
4 pcs. (+1 extra)
Flat Washer
11 pcs. (+1 extra)
Spring Washer
11 pcs. (+1 extra)
M3.5x40
Wood Screw
6 pcs. (+1 extra)
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.

Assembly Instructions 2/3
Figure 2 Figure 3
Wood Screw
Arrow label at front
Head Cap Bolt
Spring Washer
Flat Washer
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench in a safe place as the bolts may need to be tightened in the future.
STEP 1
Attach Legs (B) and (C) to Seat (A) with Flat Washers, Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
(See Figure 1)
Attach Front Stretcher (G) to unit with Wood Screws.
(See Figure 2)
Orientate Side Stretchers (E) and (F) so Arrow labels are at front of unit, then attach
Side Stretcher (E) to Leg (B) and Side Stretcher (F) to Leg (C) with Wood Screws.
(See Figure 3)
B
GE
F
C
A
Figure 1

Assembly Instructions 3/3
STEP 2
Attach Back Frame (D) to unit with Flat Washers, Spring Washers, Head Cap Bolts (short),
Head Cap Bolts (long) and Wood Screws, tightening bolts only halfway.
(See Figures 4 and 5)
Tighten all Head Cap Bolts used in Steps 1 and 2.
Figure 4 Figure 5
Wood Screw
Head Cap Bolt (short)
Spring Washer
Flat Washer
Head Cap Bolt (long)
Spring Washer
Flat Washer D

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460