Home Styles 88 5053 16 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5053 16
Student Desk
Tools recommended for assembly : Level
Hex Wrench
1 Pc. Small Hex Wrench
1 Pc.
M6x13
Head Cap Bolt
40 Pcs.(+1 extra)
M6x38
Tapered
Head Cap Bolt
6 Pcs. (+1 extra)
Flat Washer
40 Pcs. (+1 extra)
Spring Washer
40 Pcs. (+1 extra)
A.
Top
1 Pc.
B.
Keyboard
1 Pc.
C.
Shelf
2 Pcs.
D.
Side Frame
1 Pc.
E.
Side Frame
1 Pc.
F.
Frame
1 Pc.
G.
Frame
1 Pc.
H.
Stretcher
4 Pcs.
I.
Stretcher
1 Pc.
J.
Stretcher
1 Pc.
K.
Stretcher
1 Pc.

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
*After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Attach Stretcher (I) to Frame (F)
with Tapered Head Cap Bolt.
(See Figure 1)
Attach Stretcher (K) to Frame (F)
with Head Cap Bolts, Spring
Washers and Flat Washers.
(See Figure 2)
Attach Frame (G) to unit with Head Cap Bolts, Spring Washers,
Flat Washers and Tapered Head Cap Bolt.
STEP 2
Attach Stretchers (H) to unit with
Head Cap Bolts, Spring Washers
and Flat Washers.
G
H
H
H
H
I
K
F
Figure 1 Figure 2
/4
Head Cap Bolt
Head Cap Bolt
Tapered Head Cap Bolt
Spring Washer
Spring Washer
Flat Washer
Flat Washer

Assembly Instructions 3/4
STEP 3
Attach Side Frame (D) to unit
with Head Cap Bolts, Spring
Washers and Flat Washers.
Attach Stretcher (J) to unit with
Head Cap Bolts,
Spring Washers and
Flat Washers.
Attach Side Frame (E) to unit
with Head Cap Bolts, Spring
Washers and Flat Washers.
STEP 4
Place Top (A) upside down on
a soft cloth.
Attach unit to Top (A) with
Head Cap Bolts, Spring Washers
and Flat Washers.
Head Cap Bolt
Head Cap Bolt
Spring Washer
Spring Washer
Flat Washer
Flat Washer
D
J
A
E

Assembly Instructions 4
Note: Unit must be level to work property.
/4
STEP 6
Turn the unit over to its’ upright position.
Slide Keyboard (B) into position.
If you want to remove the keyboard in the
future, push the plastic lever on its’ left
side up, push the plastic lever on its’ right
side down and pull open
slowly. (See Figure 3)
To level the unit, adjust the adjustable
levelers on the bottom of unit.
(See Figure 4)
Figure 3 Figure 4
Tapered Head Cap Bolt
Head Cap Bolt
Spring Washer
Flat Washer
C
B
C
STEP 5
Attach Shelves (C) to unit
with Head Cap Bolts,
Spring Washers,
Flat Washers and
Tapered Head Cap Bolts.