Home Styles Orleans 88 5060 941 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
A.
Top Unit
1 pc.
For assembly see instructions in carton 88 5060 942
Part List
88 5060 941
The Orleans Kitchen Island

Hardware List
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Hex Wrench
1 pc.
Head Cap Bolt
(short)
28 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
C.
Shelf
1 pc.
Part List (in this carton)
Tools recommended for assembly :Level
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5060 942
The Orleans Kitchen Island
D.
Shelf
1 pc.
E.
Support
4 pcs. F.
Leg
4 pcs.
B.
Apron Frame
1 pc.
Spring Washer
14 pcs. (+1 extra)
Flat Washer
14 pcs. (+1 extra)
Head Cap Bolt
(long)
4 pcs. (+1 extra)
Head Cap Bolt
14 pcs. (+1 extra)

Assembly Instructions 2/3
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
*You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
D
F
F
F
F
STEP 2
Attach Support (E) to the Shelf (C) with Head
Cap Bolts (long). (see Figure 2)
STEP 1
Attach Leg (F) to the Shelf (C) and (D),
using Head Cap Bolts (short). (see Figure 1)
Tighten only halfway.
(Figure 2)
(Figure 1)
Head Cap Bolt (short)
Head Cap Bolt (long)
E
E
E
E
C
C

Assembly Instructions 3/3
To level the unit, adjust the adjustable
levelers on the bottom of unit. (see Figure 6)
B
STEP 3
Attach the base unit on to Top unit
with Head Cap Bolts (short) and Flat
Washers, Spring Washers, Head Cap
Bolts. (see Figure 4), (see Figure 5)
Tighten all bolts completely.
Turn the unit over to its’ upright
position.
(Figure 6)
Head Cap Bolt (short)
Note: Unit must be level to work properly.
Spring Washer
Flat Washer
(Figure 3) (Figure 4) (Figure 5)
STEP 3
Place Top (A) upside down on a soft cloth.
Attach the Apron Frame (B) to Top (A)
with Flat Washers, Spring Washers and
Head Cap Bolts. (see Figure 3)
A
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt