Home Styles Stainless Steel Top Kitchen with Wood Breakfast Bar 88508695... User manual

(For Drawer N&O packed in separate carton
with hardware and assembly instructions.)
M.
Gate Leg
1 pc.
HARDWARE LIST
Caster
2 with lock and
2 without lock
4 pcs.
Head Cap Bolt
14 pcs. (+1 Extra)
Hex Wrench
1 pc.
Cam Lock Screw
4pcs. (+1 Extra)
Pull Handle
2 pcs.
Cam Lock
4 pcs. (+1 Extra)
Machine Screw
for Pull Handle
4 pcs.
Wood Screw
(for Caster & Gate Leg)
22 pcs. (+2 Extra)
Adjustable Pin
8 pcs. (+2 Extra)
Wood Plug
10 pcs.
(+2 Extra)
Thai Patent Pending Numbers 077214
88508695 C
Stainless Steel Top Kitchen Cart
with Wood Breakfast Bar
A.
Top
1 pc.
B.
Side Frame L.
1 pc.
PART LIST
Casual Attire For Today's Home
C.
Side Frame R.
1 pc.
F.
Back Panel
3 pcs.
G.
Back Post
2 pcs.
H.
Front Post
2 pcs.
I.
Back Stretcher
1 pc.
J.
Front Stretcher
1 pc.
K.
Front Rail
3 pcs.
L.
Base
1 pc.
N.
KD. Drawer
3 pcs.
O.
KD. Drawer
1 pc.
P.
Shelf
2 pcs.
Q.
Side Rack
1 pc.
R.
Side Rack
1 pc.
T.
Brush Chrome Pipes
3 pcs.
V.
Round Arm
1 pc.
U.
Handle Arm
2 pcs.
E.
Middle
Frame R.
1 pc.
D.
Middle
Frame L.
1 pc.
S.
Base Rack
1 pc.
Tools Required For Assembly : Philips screwdriver
Thank you for purchasing our quality products.
Please carefully check the quantity of the parts
and hardware. Please also read this assembly
instructions until you understand clearly how to
put the parts together, then start assembling
step by step.
X.
Door
1pc.
W.
Door
1pc.

Assembly Instructions 2/4
STEP 1
STEP 2
STEP 3
J
L
E
L
FFF
K
K
K
DE
B
D
Attach 4 Casters to the underside of the
Base (L), put the 2 Casters with
lock in front as you first need to lock the
cart from moving. (See sticker in the bottom indicating front side)
Put the Front Rail (K) in between the
Middle Frame (D) and (E).
Attach the Side Frame (B) to the
side of the unit with Head Cap Bolts.
Slide the Back Panels (F) into place.
Attach the Back Post (G) and
Front Post (H) to the Middle Frame
(D) and (E).
Attach the assembled Middle Frame
(D) and (E) to the Base (L).
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to
tighten up the Head Cap Bolts in the future.
G
D
H

STEP 5
STEP 4
STEP 6
STEP 7
Attach the Handle Arm (U) to the
Side Frame (C) with Head Cap Bolts.
Slide the Round Arm (V) into place.
Attach the Gate Leg (M) at the rear
and connect it to the unit with Wood Screws.
Attach the Back and Front
Stretcher (I), (J) to the
assembled unit with Head Cap Bolts.
Attach the Side Frame (C) to the other side
of the unit with Head Cap Bolts.
Assembly Instructions 3/4
J
C
I
M
S
T
T
T
U
UV
C
Q
B
R
Attach the Side Rack (Q) to the Side Frame (B)
with the Head Cap Bolts.
Attach the Brush Chrome Pipes (T) to the pre-drilled
holes of Side Rack (Q).
Attach the Base Rack (S) to the Side Rack (Q).
Attach the Side Rack (R) to the Side Frame (B),
using Head Cap Bolts.
Holding Gate Leg
and rear frame
with Wood Screw

Assembly Instructions 4/4
STEP 8
STEP 9
STEP 10
Place the Top (A) on the assembled unit.
Place the Cam Locks into the holes of the
Side Frames (B) and (C).
Make sure the Arrow sign on top. and tighten all
the Cam Locks as to secure the Top with
the body.
Insert the Adjustable Pins into the Side
Frame (B), Middle Frame (D) and Side
Frame (C), Middle Frame (E) at the
desired level.
Place Shelf (P) into place.
A
P
WX
N
N
N
O
P
A
B
B
DE
C
C
Attach the Pull Handles to the
Door (W) and (X) using the Machine Screws.
Attach the Door (W) and (X) to the
Side Frame (B) and (C), slide the door
lift hinges into the side frame lift hinges.
See Assembly Instructions for Drawers
in the separate carton.
Slide the Drawers (N) and (O) into place.
Turn the Top (A) upside down
and put the Cam Lock Screws
to the pre-drilled holes.
Lift hinge
Assembly
Pull Handle
Assembly
See the “Arrow”
on top
STEP 11
Cover all holes with
Wood Plugs

Assembly Instructions
Unit Part List
N3.
Side Part (L.)
1 pc. for each
drawer.
N4.
Side Part (R.)
1 pc. for each
drawer.
N5.
Base Part
1 pc. for each
drawer.
N2.
Back Part
1 pc. for each
drawer.
N2
N2
N5
N5
N3
N4
N4
N4
N3
N3
N1
N1
N1
(Fig) 2
(Fig) 3
(Fig) 4
Assemble the Pull Handle
with Machine Screw on
the Front Part(N1).
(Fig)1
(Fig)2
(Fig)3
(Fig)4
Turn the assembled drawer over and slide the
Plywood Base Part (N5) into the grooves
on Side Parts (N3) and (N4). Be sure to push
the plywood all the way forward so it meets the
Front Part (N1).
HARDWARE LIST
Pull Handle
3 pcs.
Machine Screw
for Pull Handle
6 pcs.
1
Wood Screw /”
2
(for Bottom Part)
18 pcs.(+1 Extra)
Wood Screw 1”
(for Side Part)
24 pcs.(+1 Extra)
88508695 C
Drawer (N)
(Fig) 1
Line up Side Parts (N3) and (N4)to the
Front Part (N1) and Back Part (N2). Be sure to
follow the ‘Arrow’ sign sticker on the parts.
Using a Phillip’s screwdriver, insert 1” screws
into each of the 4 pre-drilled holes on the side
of (N3) and (N4), then tighten half way.
Insert the remaining (6) 1/2” screws
into the pre-drilled holes in Base Part
(N5), then tighten all screws
MAKE SURE ROLLER
IS ON THE BACK
* If you are missing any of these
parts, please contact our DMI
Customer Service Department
at 1-877-831-0319 or fax us at
1-800-755-2878.
N1.
Front Part
1 pc. for each
drawer.

Assembly Instructions
Unit Part List
O3.
Side Part(L.)
1 pc.
O4.
Side Part(R.)
1 pc.
O5.
Base Part
1 pc.
O2.
Back Part
1 pc.
O2
O2
O5
O5
O3
O4
O4
O4
O3
O3
O1
O1
O1
(Fig) 2
(Fig) 3
(Fig) 4
Assemble the Pull Handle
with Machine Screw on
the Front Part(O1).
(Fig)1
(Fig)2
(Fig)3 (Fig)4
Turn the assembled drawer over and slide the
Plywood Base Part (O5) into the grooves
on Side Parts (O3) and (O4). Be sure to push
the plywood all the way forward so it meets the
Front Part (O1).
HARDWARE LIST
Pull Handle
1 pc.
Machine Screw
for Pull Handle
2 pcs.
1
Wood Screw /”
2
(for Bottom Part)
6 pcs.(+1 Extra)
Wood Screw 1”
(for Side Part)
8 pcs.(+1 Extra)
88508695 C
Drawer (O)
(Fig) 1
Line up Side Parts (O3) and (O4)to the
Front Part (O1) and Back Part (O2). Be sure to
follow the ‘Arrow’ sign sticker on the parts.
Using a Phillip’s screwdriver, insert 1” screws
into each of the 4 pre-drilled holes on the side
of (O3) and (O4), then tighten half way.
Insert the remaining (6) 1/2” screws
into the pre-drilled holes in Base Part
(O5), then tighten all screws
MAKE SURE ROLLER
IS ON THE BACK
* If you are missing any of these
parts, please contact our DMI
Customer Service Department
at 1-877-831-0319 or fax us at
1-800-755-2878.
O1.
Front Part
1 pc.